The initial view of the PDF depends on how its creator set the document properties. For example, a document may open at a particular page or magnification.
The Organizer and Organizer-related commands are not available in Acrobat X and later.
When you’re reading a document, you can hide all the toolbars and task panes to maximize the viewing area on your screen.
The basic reading controls, such as page navigation and zoom, appear in a semi-transparent floating toolbar near the bottom of the window.
To open Read mode, choose View > Read Mode, or click the Read Mode button in the upper-right corner of the toolbar.
To restore the work area to its previous view, choose View > Read Mode again. You can also click the close button in the floating toolbar.
Read mode is the default viewing mode when you open a PDF in a web browser.
In Full Screen mode, only the document appears; the menu bar, toolbars, task panes, and window controls are hidden. A PDF creator can set a PDF to open in Full Screen mode, or you can set the view yourself. Full Screen mode is often used for presentations, sometimes with automatic page advancement and transitions.
The pointer remains active in Full Screen mode so that you can click links and open notes. There are two ways to advance through a PDF in Full Screen mode. You can use keyboard shortcuts for navigational and magnification commands, and you can set a Full Screen preference to display Full Screen navigation buttons that you click to change pages or exit Full Screen mode.
The Full Screen navigation bar contains Previous Page , Next Page , and Close Full Screen View buttons. These buttons appear in the lower-left corner of the work area.
If the Full Screen navigation bar is not shown, you can use keyboard shortcuts to navigate through a PDF.
If you have two monitors installed, the Full Screen mode of a page sometimes appears on only one of the monitors. To page through the document, click the screen displaying the page in Full Screen mode.
To show a Full Screen tool in the Common Tools toolbar, right-click the toolbar area and choose Page Display > Full Screen Mode. Then click the Full Screen tool to switch to Full Screen mode.
Touch mode makes it easier to use Acrobat and Reader on touch devices. Toolbar buttons, panels, and menus shift apart slightly to accommodate selecting with your fingers. The Touch reading mode optimizes viewing and supports most common gestures. Acrobat and Reader automatically switch to Touch mode when on a touch-enabled device. You can add a Touch mode toggle button to the toolbar or change the default preference setting for Touch mode.
PDF/A is an ISO standard for long-term archiving and preservation of electronic documents. Documents you scan to PDF are PDF/A-compliant. You can specify whether you want to view documents in this viewing mode.
When you open a PDF/A compliant document in PDF/A viewing mode, the document is opened in Read mode to prevent modification. A message is displayed in the document message bar. You will be unable to make changes and add annotations to the document. If you turn off PDF/A mode, you can edit the document.
For a video on working with PDF/A files, see www.adobe.com/go/learn_acr_pdfa_en.
The Line Weights view displays lines with the weights defined in the PDF. When Line Weights view is off, it applies a constant stroke width (1 pixel) to lines, regardless of zoom. When you print the document, the stroke prints at the true width.
You cannot turn off Line Weights view when viewing PDFs within a web browser.
Use the Compare Documents feature to show the differences between two versions of a PDF. You can customize many options for displaying the compare results. For a video on comparing PDFs, see www.adobe.com/go/lrvid_011_acrx_en. (Video applies to both Acrobat X and Acrobat XI.)
To hide the annotations that display changes, click Hide Results.
To specify the display options for compare results, click Show Options. You can specify the type of changes to display, and the color scheme and opacity of the annotations. To return to the page thumbnails, click Hide Options.
To show each of the documents in its own window, from the options menu , choose Show Documents Tiled or Show Documents Side By Side. To synchronize the relevant pages while showing the documents in their own windows, from the options menu, choose Synchronize Pages.
Click a page thumbnail to go directly to that page. To change the size of the page thumbnails, from the options menu, choose Thumbnail Size > [option].
Drag the splitter bar at the bottom of the Compare panel up to show thumbnails of the old document. Click a thumbnail from the old document to open it in a new window.
Reports, Spreadsheets, Magazine Layouts
Compares the content as one continuous text body, from end to end.
Presentation Decks, Drawings Or Illustrations
Looks at each slide or page as a mini-document, and matches ones that are similar. Then compares the content of each matching document. Identifies documents that have moved, such as slides in presentation.
Creates an image capture of each scanned page and compares pixels. Looks at each scanned page and matches ones that are similar. Also identifies pages that are in a different order. This option is useful for comparing images or architectural drawings.
Compare Text Only
Use this option with any document type. This option is designed for comparing text in large documents (250 pages or more). This option also compares text between documents that have background artwork on each page, which slows processing.
With either the reports or presentation options selected, the Compare Text Only option identifies only the text differences between two documents.
With Scanned Documents selected, the text is compared separately from the graphics, and then the results are combined. In documents containing magazine advertisements that have text on top of background image art, a reflowed passage is compared in text-only mode. The artwork is compared separately in the background. The differences (both text and line art and images) are combined into a single results document.
The Preferences dialog box defines a default page layout and customizes your application in many other ways. For viewing PDFs, examine the preferences options for Documents, General, Page Display, and 3D & Multimedia.
The preferences settings control how the application behaves whenever you use it; they are not associated with any particular PDF document.
If you install any third-party plug-ins, set these preferences using the Third-Party Preferences menu item.
Restore Last View Settings When Reopening Documents
Determines whether documents open automatically to the last viewed page within a work session.
Open Cross-document Links In Same Window
Closes the current document and opens the document being linked to in the same window, minimizing the number of windows open. If the document being linked to is already open in another window, the current document is not closed when you click a link to the open document. If you do not select this option, a new window opens each time you click a link to a different document.
Allow Layer State To Be Set By User Information
Allows the author of a layered PDF document to specify layer visibility based on user information.
Allow Documents To Hide The Menu Bar, Toolbars, And Window Controls
Allows the PDF to determine whether the menu bar, toolbar, and window controls are hidden when the PDF is opened.
Automatically Save Document Changes To Temporary File Every _ Minutes
Determines how often Acrobat automatically saves changes to an open document.
Save As Optimizes For Fast Web View
Restructures a PDF document for page-at-a-time downloading from web servers.
View Documents In PDF/A Mode
Specifies when to use this viewing mode: Never, or Only For PDF/A Documents.
Searches the PDF for items that may not be apparent, such as metadata, file attachments, comments, and hidden text and layers. The search results appear in a dialog box, and you can remove any type of item that appears there.
Adjust Filename When Saving Applied Redaction Marks
Specifies a prefix or suffix to use when saving a file to which redaction marks have been applied.
Choose Localization For Search and Redact Patterns
Specifies which installed language version of Acrobat to use for the patterns. For example, if you installed both the English and German versions, then you can choose either language for the patterns. The Patterns option appears in the Search and Redaction dialog boxes.
Fill Screen With One Page At A Time
Sets the page view to the maximum screen coverage by a single page.
Alert When Document Requests Full Screen
Displays a message before going into Full Screen mode. Selecting this option overrides a previous selection of Do Not Show This Message Again in that message.
Which Monitor To Use
Specifies the monitor on which full-screen display appears (for users with multiple-monitor configurations).
Escape Key Exits
Lets you exit Full Screen mode by pressing the Esc key. If this option is not selected, you can exit by pressing Ctrl+L.
Left Click To Go Forward One Page; Right Click To Go Back One Page
Lets you page through an Adobe PDF document by clicking the mouse. You can also page through a document by pressing Return, Shift-Return (to go backward), or the arrow keys.
Loop After Last Page
Lets you page through a PDF document continuously, returning to the first page after the last. This option is typically used for setting up kiosk displays.
Advance Every _ Seconds
Specifies whether to advance automatically from page to page every set number of seconds. You can page through a document using mouse or keyboard commands even if automatic paging is selected.
Specifies the window’s background color in Full Screen mode. You can select a color from the color palette to customize the background color.
Ignore All Transitions
Removes transition effects from presentations that you view in Full Screen mode.
Specifies the transition effect to display when you switch pages in Full Screen mode and no transition effect has been set for the document.
Determines the flow of the selected default transition on the screen, such as Down, Left, Horizontal, and so on. The available options vary according to the transition. If no directional options affect the selected default transition, this option is not available.
Navigation Controls Direction
Mimics the user’s progress through the presentation, such as transitioning from top to bottom when the user proceeds to the next page and from bottom to top when the user backtracks to the previous page. Available only for transitions with directional options.
Use Single Key Accelerators To Access Tools
Enables you to select tools with a single keystroke. This option is deselected by default.
Create Links From URLs
Specifies whether links that weren’t created with Acrobat are automatically identified in the PDF document and become clickable links.
Make Hand Tool Select Text & Images
Enables the Hand tool to function as the Select tool when it hovers over text in an Adobe PDF.
Make Hand Tool Read Articles
Changes the appearance of the Hand tool pointer when over an article thread. Upon the first click, the article zooms to fill the document pane horizontally; subsequent clicks follow the thread of the article.
Make Hand Tool Use Mouse-wheel Zooming
Changes the action of the mouse wheel from scrolling to zooming.
Use Fixed Resolution For Snapshot Tool Images
Sets the resolution used to copy an image captured with the Snapshot tool.
Sets how Acrobat enters the Touch mode, if at all, for touch enabled-devices. In Touch mode, Toolbar buttons, panels, and menus shift apart slightly to accommodate selecting with your fingers. The Touch reading mode optimizes viewing and supports most common gestures.
Do Not Show Edit Warnings
Disables warning boxes that would normally appear when you delete items such as links, pages, page thumbnails, and bookmarks.
Show Me Messages When I Launch Acrobat
Allows in-product marketing messages from Adobe to appear in the Welcome Screen when you launch the application without a document open. Click a message to get information about features, updates, or online services, or to open an element in the application, such as a task pane. Deselect the option to prevent in-product marketing messages from appearing.
Transactional messages, which facilitate the Adobe Online Service, cannot be turned off.
Show Splash Screen (Mac OS)
Determines whether the application startup screen appears each time the application starts.
Use Only Certified Plug-Ins
Ensures that only Adobe-certified third-party plug-ins are loaded. The notation Currently in Certified Mode indicates either Yes or No depending on its status.
Check 2D Graphics Accelerator (Windows only)
(Appears only if your computer hardware supports 2D graphics acceleration.) When selected, allows hardware acceleration usage when the first document is opened. When deselected, hardware acceleration usage starts after the first document is opened. This option can slow startup time, so it is deselected by default.
This option is available only when the option Use 2D Graphics Acceleration in the Page Display preferences is selected.
Select Default PDF Handler (Windows only)
Specifies which application, Reader or Acrobat, is used to open PDFs. This setting applies if you have both Acrobat and Reader installed on your computer. In Windows 7 or earlier, a browser uses this setting only if it is using the Adobe plug-in or add-on for viewing PDF files. In Windows 8, this setting controls which application is the default PDF application for your system, including in your browser. Windows 8 prompts you to allow this change before applying it to your system. Once set, Windows 8 also uses the selected PDF application for tasks related to PDF files, such as previewing, displaying thumbnails, and providing file information.
Sets the page layout used for scrolling when you first open a document. The default setting is Automatic. The Page Layout setting in File > Properties > Initial View overrides this value.
Sets the magnification level for PDF documents when they are first opened. The default setting is Automatic. The Magnification setting in File > Properties > Initial View overrides this value.
Two conditions can affect page layout and zoom. 1) Someone has already set an individual PDF to a different initial view in File > Properties. 2) You have the option Restore Last View Settings When Reopening Documents selected in Edit > Preferences > Document category.
Use Local Fonts
Specifies whether the application uses or ignores local fonts installed on your system. When deselected, substitute fonts are used for any font not embedded in the PDF. If a font cannot be substituted, the text appears as bullets and an error message appears.
Use Page Cache
Places the next page in a buffer before the current page is viewed to reduce the time required to page through a document.
Use 2D Graphics Acceleration (Windows only)
(Appears only if your computer hardware supports 2D graphics acceleration.) Speeds up zooming, scrolling, and redrawing of page content, and speeds the rendering and manipulation of 2D PDF content. This option is selected by default.
If this option is not available in the Page Display preferences, you may need to update your GPU card driver to enable this hardware feature. Contact your card vendor or computer manufacturer for an updated driver.
Show Large Images
Displays large images. If your system is slow to display image-intensive pages, deselect this option.
Use Smooth Zooming (Windows only)
When deselected, turns off animation effects, which improves performance.
Use Logical Page Numbers
Enables the Number Pages command for matching the position of the page in the PDF to the number printed on the page. A page number, followed by the page position in parentheses, appears in the Page Navigation toolbar and in the Go To Page and Print dialog boxes. For example, i (1 of 1) if the printed number of the first page is i. If this option is not selected, pages are numbered with arabic numbers starting at 1. Selecting this option helps prevent unexpected behavior when clicking Back or Go Back in your web browser.
Use Overprint Preview
Specifies whether Overprint Preview mode is on only for PDF/X files, never on, always on, or set automatically. When set to Automatic, if a document contains overprints, then Overprint Preview mode is activated. The Overprint Preview mode lets you see (onscreen) the effects of ink aliasing in the printed output. For example, a printer or service provider could create an ink alias if a document contains two similar spot colors and only one is required.
Default Transparency Blending Color Space
Sets the default color space, Working RGB or Working CMYK, for transparency blending.
Show Reference XObject Targets
Specifies the type of documents in which reference XObjects can be viewed.