버전용 도움말 콘텐츠:

참고:

This documentation describes how to integrate AEM with Adobe Campaign Standard, the subscription-based solution. If you are using Adobe Campaign 6.1, see Integrating with Adobe Campaign 6.1 for those instructions.

Adobe Campaign lets you manage email delivery content and forms directly in Adobe Experience Manager.

To use both solutions together at the same, you must first configure them to connect to one another. This involves configuration steps in both Adobe Campaign and Adobe Experience Manager. These steps are described in detail in this document.

Working with Adobe Campaign in AEM includes the ability to send email and forms via Adobe Campaign and is described at Working with Adobe Campaign.

In addition, the following topics may be of interest when integrating AEM with Adobe Campaign:

If you are extending your integration with Adobe Campaign, you may want to see the following pages:

경고:

When upgrading to AEM 6.2 SP1:

For security reasons, the campaign-remote user does not have a password set out of the box. After a password is set for the campaign-remote user, installing cq-mcm-content or any service pack/cumulative fix pack containing cq-mcm-content will lead to an error (Authorizable property rep:password may not be removed) and will cause the 6.2 Service Pack 1 upgrade to fail. To work around this issue, remove the campaign-remote user in the user administration console (Security > Users) before installing the content package.

Note: After removing and re-installing the campaign-remote user, you need to reset the password.

Configuring Adobe Campaign

Configuring Adobe Campaign involves the following:

  1. Configuring the aemserver user.
  2. Creating a dedicated external account.
  3. Verifying the AEMResourceTypeFilter option.
  4. Creating a dedicated delivery template.

참고:

To perform these operations, you must have the administration role in Adobe Campaign.

Prerequisites

Make sure you have the following elements beforehand:

경고:

Operations detailed in the Configuring Adobe Campaign and Configuring Adobe Experience Manager sections are necessary for the integration functionalities between AEM and Adobe Campaign to work correctly.

Configuring the aemserver user

The aemserver user must be configured in Adobe Campaign. The aemserver is a technical user that will be used to connect the AEM server to Adobe Campaign.

Go to Administration Users & Security Users, and select the aemserver user. Click it to open the user settings.

  • You have to set a password for this user. This cannot be done through the UI. This configuration must be done in REST by a technical administrator.
  • You can assign specific roles to this user, such as deliveryPrepare, which allows the user to create and edit deliveries.

 

Configuring an Adobe Experience Manager external account

You must configure an external account that allows you to connect Adobe Campaign to your AEM instance.

참고:

In AEM, be sure that you set the password for the campaign-remote user. You need to set this password to connect Adobe Campaign with AEM. Log in as administrator and in the user administration console, search for the campaign-remote user and click Set Password.

경고:

When upgrading to AEM 6.2 SP1:

For security reasons, the campaign-remote user does not have a password set out of the box. After a password is set for the campaign-remote user, installing cq-mcm-content or any service pack/cumulative fix pack containing cq-mcm-content will lead to an error (Authorizable property rep:password may not be removed) and will cause the 6.2 Service Pack 1 upgrade to fail. To work around this issue, remove the campaign-remote user in the user administration console (Security > Users) before installing the content package.

Note: After removing and re-installing the campaign-remote user, you need to reset the password.

To configure an AEM external account:

  1. Go to Administration > Application settings > External accounts.

    chlImage_1
  2. Select the default aemInstance external account or create a new one by clicking the Create button.

  3. Select Adobe Experience Manager in the Type field and enter the access parameters used for your AEM authoring instance: server address, account name and password.

    참고:

    Be sure that you do not add an ending / slash at the end of the URL or the connection will not work.

  4. Make sure that the Enabled checkbox is selected, then click Save to save your modifications.

Verifying the AEMResourceTypeFilter option

The AEMResourceTypeFilter option is used to filter types of AEM resources that can be used in Adobe Campaign. This allows Adobe Campaign to retrieve AEM contents that are specifically designed to be used in Adobe Campaign only.

This option comes pre-configured; however, if you change this option, it may lead to a non-functioning integration.

To verify the AEMResourceTypeFilter option is configured:

  1. Go to Administration > Application settings > Options.

  2. In the list, you can ensure that the AEMResourceTypeFilter option is listed and that the paths are correct.

Creating an AEM-specific email delivery template

By default, the AEM feature is not enabled in Adobe Campaign's email templates. You can configure a new email delivery template that will be used to create emails with AEM content.

To create an AEM-specific email delivery template:

  1. Go to Resources > Templates > Delivery templates.

  2. Enable selection by clicking the checkmark in the action bar and selecting the existing Standard email (mail) default template, then duplicate it by clicking the Copy icon and clicking Confirm.

  3. Disable the selection mode by clicking the x and open the newly created Copy of Standard email (mail) template, then select Edit properties from the action bar of the template dashboard.

    You can modify the template's Label.

  4. In the properties Content section, change the Content source to Adobe Experience Manager. Then select the external account that was previously created and click Confirm.

    Save your modifications by clicking Confirm and clicking Save.

    Email deliveries created from this template will have the AEM content feature enabled.

    chlImage_1

Configuring Adobe Experience Manager

To configure AEM, you must do the following:

  • Configure replication between instances.
  • Connect AEM to Adobe Campaign.
  • Configure the externalizer.

Configuring replication between AEM instances

Content created from the AEM authoring instance is first sent to the publishing instance. This publishing instance then transfers the content to Adobe Campaign. The replication agent must therefore be configured to replicate from the AEM authoring instance to the AEM publishing instance.

참고:

If you do not want to use the replication URL but instead use the public-facing URL, you can set the Public URL in the following configuration setting in the OSGi (Tools > Web Console > OSGi Configuration > AEM Campaign Integration - Configuration):

Public URL: com.day.cq.mcm.campaign.impl.IntegrationConfigImpl#aem.mcm.campaign.publicUrl

This step is also necessary to replicate certain authoring instance configurations into the publishing instance.

To configure replication between AEM instances:

  1. From the authoring instance, select AEM logoTools icon > Deployment > Replication > Agents on author, then click Default Agent.

    chlImage_1

    참고:

    Avoid using localhost (that is a local copy of AEM) when configuring your integration with Adobe Campaign unless the publish and author instance are both on the same computer.

  2. Click Edit then select the Transport tab.

  3. Configure the URI by replacing localhost with the IP address or the address of the AEM publishing instance.

    chlImage_1

Connecting AEM to Adobe Campaign

Before you can use AEM and Adobe Campaign together, you must establish the link between both solutions so that they can communicate.

  1. Connect to your AEM authoring instance.

  2. Select Tools > Operations > Cloud > Cloud Services, then Configure now in the Adobe Campaign section.

    chlImage_1
  3. Create a new configuration by entering a Title and click Create, or choose the existing configuration that you want to link with your Adobe Campaign instance.

  4. Edit the configuration so that it matches the parameters of your Adobe Campaign instance.

    • Usernameaemserver, the Adobe Campaign AEM Integration package operator used to establish the link between the two solutions.
    • Password: Adobe Campaign aemserver operator password. You may have to re-specify the password for this operator directly in Adobe Campaign.
    • API End Point: Adobe Campaign instance URL.
  5. Select Connect to Adobe Campaign and click OK.

    chlImage_1

    참고:

    After you create your email and publish it, you need to re-publish the configuration onto your publish instance.

    chlImage_1

참고:

If the connection fails, make sure you check the following:

  • You may encounter a certificate problem when using a secure connection to an Adobe Campaign instance (https). You will have to add the Adobe Campaign instance certificate to the cacerts file of your JDK.
  • In addition, see Troubleshooting your AEM/Adobe Campaign Integration.

Configuring the externalizer

You need to configure the externalizer in AEM on your author instance. The Externalizer is an OSGi service that lets you transform a resource path into an external and absolute URL. This service provides a central place to configure those external URLs and build them.

See Configure the externalizer for general instructions. For the Adobe Campaign integration, make sure you configure the publish server at http://<host>:<port>/system/console/configMgr/com.day.cq.commons.impl.ExternalizerImpl not point to localhost:4503 but to a server that is reachable by the Adobe Campaign console.

If it points to localhost:4503 or another server that Adobe Campaign cannot reach, your images will not appear on the Adobe Campaign console.

chlImage_1

이 작업에는 Creative Commons Attribution-Noncommercial-Share Alike 3.0 Unported License의 라이센스가 부여되었습니다.  Twitter™ 및 Facebook 게시물은 Creative Commons 약관을 적용받지 않습니다.

법적 고지 사항   |   온라인 개인 정보 보호 정책