Resolve printing and PDF export errors in InDesign

Learn how to resolve errors when you print or export to PDF from InDesign.

Preliminary troubleshooting

Try the solutions in the order listed below to understand the nature of the problem. It is possible that your issue is resolved in this process without having to proceed to advanced troubleshooting.

Solution

Explanation

Restart your computer

Error doesn't recur: A temporary communication problem, low system resources, or environmental factors such as a storm could have caused it. 

Error recurs on printing or exporting after restart: Follow the solutions in the system-level issues tab.

Restart your printer

Error doesn't recur: An issue with the printer's memory could have caused the problem.

Create a new sample document

If you can print or export a new document but not the original document, follow the solutions in the document-level issues tab.

Print or export using a different application

If you can print from another application (e.g., WordPad, TextEdit) or export/save as a PDF from another application (e.g., Illustrator, Photoshop) and encounter errors, follow the solutions in the application-level issues tab.

Print to a different printer

If another printer is available, try printing the document to that printer. If that works, make sure that the original printer is turned on and online. Remove and reconnect the printer cables, and then run a self-test on the printer to check for mechanical failure or damaged cables. If the problem persists, follow the solutions in the system-level issues tab.

Use a different method to create the PDF file

If the issue occurs:

  • When exporting to PDF from InDesign to Acrobat Standard, Pro, or Pro Extended, try printing to Adobe PDF Printer. (If you're using macOS v10.6 or later with Acrobat 9, see Acrobat 9 Save As Adobe PDF support.)
  • When you use the Print function to create your PDF file, choose File > Export to PDF instead.

Select your issue from the following tabs and proceed with the solutions.

If the error occurs when you print or export a new document, the original document's print or export settings could be invalid, an object or font used in the document could be damaged, or the structure of the document could be damaged. Try one or more of the following steps.

 Depending on which printer you use, the location of settings may vary and may be different from what's listed in the following procedures. Check your printer documentation.

Solution 1: Export to IDML (InDesign CS4 and later) or INX (InDesign CS3 and earlier).

The document is probably damaged as a result of improper conversion from previous versions of InDesign or QuarkXpress documents. 

Suggestion: Exporting to InDesign Markup Language (IDML) or InDesign Interchange format (INX) can eliminate problematic data.

Solution 2: (PostScript printers only) Enable PostScript error handling.

Windows

macOS

  1. Choose File > Print.

  2. Click the Setup button.

  3. If the following dialog appears, click OK: "If the desired print setting is available in InDesign's Print dialog box, please set it there to avoid printing conflicts."

  4. Right-click the printer and choose Properties.

  5. In the General tab, click Printing Preferences.

  6. Click Advanced.

  7. Expand Document Options and then expand PostScript Options. If Send PostScript Error Handler is not set to Yes, click it and choose Yes from the pop-up menu.

  1. Choose File > Print.

  2. Select the printer.

  3. Choose Error Handling from the menu below the Presets menu.

  4. Select Print Detailed Report, and then click Print.

If a PostScript error is causing the problem, the PostScript error handler prints a page with error information. See Troubleshoot PostScript errors.

Solution 3: Exclude graphics from the document.

When you print

When you export to pdf

  1. Choose File > Print.

  2. Click Graphics, and then choose None from the Send Data menu.

  3. Click Print.

  1. Choose File > Export and select Adobe PDF (Print) as the format or Save as type.

  2. Choose a location and click Save.

  3. Click Advanced, and then select all three Omit for OPI checkboxes: EPS, PDF, and Bitmap.

  4. Change the PDF standard to None to allow the exclusion of images.

  5. Click Export.

If the document prints or exports successfully, one or more graphic elements on the page could be damaged. Follow these steps to proceed further:

  1. Remove a percentage of graphics and try printing. Repeat the process until you isolate the graphics causing the error.

  2. Once you identify graphics that consistently produce the error, delete and replace them. You may need to re-export a graphic from the application in which you created it.

A successful print job without graphics can also indicate inadequate printer memory. Symptoms include fonts being substituted, missing graphics, or incomplete printouts. Follow these steps to proceed further:

  1. Print using a page range.

  2. Print with reduced number of graphics.

  3. Print at lower resolution.

 If the document contains only graphical elements, you receive a blank page when you print only if the option to print blank pages is enabled in InDesign. Select Print Blank Pages in the General section of the Print dialog box.

Solution 4: Exclude or minimize fonts.

When you print

When you export to PDF

  1. Choose File > Print.

  2. Click Graphics.

  3. In the Fonts section, choose None from the Download menu.

  4. Click Print.

You can't exclude fonts when exporting, but you can minimize the number of fonts used.

  1. Choose TypeFind Font.

  2. In the Fonts in Document list, hold the Shift key and select the first and last fonts to select all the fonts in the list.

  3. In the Replace With Font Family list, choose a font you know works in other documents, such as Arial or Verdana.

  4. Click Change All.

  5. Click Done.

  6. Choose File > Export and select Adobe PDF (Print) as the format.

  7. Choose a location and click Save.

  8. Click Export.

Create a copy of the document and then test the fonts one at a time to isolate thee corrupt or damaged font. You can replace corrupt fonts by re-downloading them from the manufacturer's site.

Solution 5: Check for invalid links.

To view the status of links, choose Window > Links. Unlink or relink files in which the filename is preceded with a question mark or other symbol. For more information about InDesign links, see managing graphics links.

Solution 6: Disable settings.

Disable as many settings as possible. If disabling settings resolves the issue, enable them again in groups to isolate the problem to a particular setting.

 The availability of these settings is based on the printer you use.

Choose File > Print to open the Print dialog box. Then change the settings in the respective pane:

General pane

  • Set copies to 1.
  • Select Pages to disable Spreads.
  • Clear Print Master Pages, Print Non-printing Objects, and Print Visible Guides and Baseline Grids.
  • Set print layers to Visible & Printable Layers.

Setup pane

  • Set paper size to Defined by Driver.
  • Set scale width and height to 100%.
  • Disable Thumbnails and Tile.

Marks and Bleed pane

  • Disable Marks, Bleed, and Slug.

Output pane

  • Set color to Composite Leave Unchanged.
  • Disable Trapping, Text as Black, and Simulate Overprint.
  • In the Ink Manager, disable Ink Aliasing.

Graphics pane

  • Set images to Send Data to None or All.
  • Set fonts to Download to None or All.
  • Set PostScript to Level 2.
  • Set data format to ASCII.

Color Management pane

  • Set color handling to Let PostScript Printer Determine Colors.
  • Enable Preserve CMYK Numbers.

Pages panel (outside the Print dialog box)

Select all the pages, right-click, and then choose Page Attributes > Spread Flattening > None (Ignore Transparency).

Solution 7: Troubleshoot plug-ins.

Remove third-party plug-ins from the InDesign Plug-ins folder, and then restart InDesign. If the problem recurs, move the plug-ins back to the InDesign Plug-ins folder. If the problem doesn't recur, identify conflicting plug-ins:

  1. Choose Help > Configure Plug-Ins (Windows) or InDesign > Configure Plug-Ins (macOS).

  2. Select All Plug-Ins for the Set and then clear all the options in the Display section except Third Party. Create a list of these plug-ins.

  3. Quit InDesign and move these plug-ins out of the Plug-in folder:

    • Windows: /Program Files/Adobe/Adobe InDesign [Version]/Plug-Ins
    • macOS: /Applications/Adobe InDesign [Version]/Plug-Ins
  4. Restart InDesign, try to re-create the problem, and follow these steps:

    • If the problem doesn't recur, repeat steps 3 and 4, adding some third-party plug-ins back to the Plug-Ins folder.
    • If the problem recurs, contact the developer of the plug-in you last moved to inquire about an update.

For more information, see Troubleshoot InDesign third-party plug-ins.

Solution 8: Print or export from a new user account.

Sometimes user accounts can become corrupted and prevent an application from reading or writing to certain files and folders. Create a new user account (don't delete your original one), log in to the new account, and try to print or export the document again.

Windows

macOS

Choose Start > Control Panel > User Accounts.

Choose Apple menu > System Preferences > Users & Groups.

Solution 9: Determine if the document is damaged.

If you receive an error when printing any InDesign document, try one or more of the following tasks to identify the cause of an application-level problem.

Solution 1: Re-create InDesign preferences

When InDesign is behaving erratically, deleting preferences (also referred to as "trashing preferences" or "removing preferences") and re-creating them often solves the problem.

There are two ways to re-create preferences:

Automatically

This method quickly deletes your current preference files and then regenerates a new set of default preference files. However, any custom settings you may have had are lost.

Manually

If you don't want to lose your custom settings, rename your current preference files before regenerating a new set of default preference files. That way, if new preferences don't solve your print or export problem, you have a backup of your original preference files (including any custom settings), which you can use to replace the new preference files.

Re-create InDesign preference files automatically

 Re-creating InDesign preference files deletes previous preference data, including any custom settings. If you don't want to lose your custom settings, re-create your preference files manually.

  1. Quit InDesign.

  2. Relaunch InDesign and immediately hold down the appropriate keys for your OS:

    • macOS: Control+Option+Command+Shift
    • Windows: Control+Alt+Shift
  3. In the dialog that asks if you want to delete InDesign preference files, click Yes. InDesign launches with regenerated default preferences.

Re-create InDesign preference files manually

Rename the two preference files (e.g., change "InDesign SavedData" to "InDesign SavedData backup," and "InDesign Defaults" to "InDesign Defaults backup"). The preference files are located here:

macOS

InDesign Defaults
Users/[user]/Library/Preferences/Adobe InDesign/Version [version]/[language]/InDesign Defaults

 

InDesign SavedData:

Users/[user]/Library/Caches/Adobe InDesign/Version [version]/[language]/InDesign SavedData

Windows XP

InDesign Defaults:
/Documents and Settings/[user]/Application Data/Adobe/InDesign/Version [version]/InDesign Defaults

Hidden by default. Learn how to show hidden files.

InDesign SavedData:
/Documents and Settings/[user]/Local Settings/Application Data/Adobe/InDesign/Version[version]/Caches/InDesign SavedData

WIndows 7 and 8

InDesign Defaults:

C:\Users\DC-work\AppData\Roaming\Adobe\InDesign\Version 11.0\[language]\InDesign Defaults

Hidden by default. Learn how to show hidden files.

InDesign SavedData:

/Users/[user]/AppData/Local/Adobe/InDesign/Version[version]/[language]/Caches/InDesign SavedData

Restart InDesign. InDesign creates a new set of default preference files.

If your print or export problem persists, then you can restore your original preferences by renaming your old preference files back to their original names: InDesign SavedData and InDesign Defaults.

Solution 2: (Windows only) Make sure your printer driver is up-to-date.

Install the most recent driver for your printer:

Solution 3: (Windows, PostScript printer only) Optimize PostScript for speed.

  1. Choose File > Print.

  2. Click Setup, select a printer, click Preferences, and then click Advanced.

  3. Expand Document Options, and then expand PostScript Options.

  4. Choose PostScript Output Option.

  5. Choose Optimize for Speed from the pop-up menu, and then click OK.

  6. Click OK and then click Print.

Solution 4: Disable page protection in your printer.

See the documentation included with the printer for instructions on how to disable this feature.

Solution 6: Save as PDF to a local hard drive.

If the problem occurs when you export as PDF to a network location, try saving as PDF to a local hard drive.

Network instability or premissions issues can cause problems when exporting to mounted network volumes. If you can export the file to a local drive, but not a network location, ask your IT department to investigate the problem.

If you're experiencing problems printing to a PostScript printer, try one or more of the following tasks. Print after each task.

Solution 1: Use an updated printer driver.

Download the latest PostScript printer driver for macOS or Windows.

 If you use a network printer, you could be using a printer driver that's compatible with the print server's operating system but not with your computer's operating system. To install a printer driver that's compatible with your operating system, reconfigure the network printer using the Add Printer wizard.

Solution 2: Use an updated PPD file.

A PostScript Printer Description (PPD) file describes the capabilities of a PostScript printer for settings such as margins, color, and resolution. Incorrect or outdated PPD files can increase print times. Configure your printer with the PPD file that the printer manufacturer recommends.

To get a PPD file, contact the printer manufacturer or download it from the Adobe website.

Solution 3: (Windows only) Set up the printer to output optimized PostScript code.

For Windows 7:

  1. Choose Start > Devices and Printers.

  2. Right-click and choose Printing Preferences > Advanced.

  3. Expand the document options, and then expand the PostScript options.

  4. Set the PostScript output option to Optimize For Portability.

Solution 4: Create more free disk space.

Make sure that plenty of free hard disk space is available. Try to keep at least 10 percent of your total hard disk space free. To create more space, search for and delete temporary (.tmp) files from your computer, and clear the disk cache that your web browser uses. For instructions about clearing the disk cache, see the documentation for your browser.

Solution 5: Print from a local printer.

If you print to a network printer, try printing the file from a computer that is connected directly to a local printer. If the file prints correctly, network-related issues could be the cause of your problem. Contact the network administrator for assistance.

Solution 6: (Windows only) Install a printer driver compatible with your operating system.

If you use a network printer, install a printer driver that is compatible with your operating system. Print servers don't always provide drivers for operating systems on client computers. So, you could use a printer driver that is appropriate for the print server's operating system but not your computer's operating system.

For Windows 7:

  1. Choose Start > Devices and Printers.

  2. Click Add a Printer.

  3. Select Add a Local Printer.

  4. Choose Create a New Port > Local Port > Next.

  5. Enter the port name (e.g., \\[printservername]\[printername]) and click OK.

  6. Follow the onscreen instructions to install a driver that matches the brand and model of your network printer.

If you have problems printing to a non-PostScript printer, try one or more of the following tasks. Print after each task.

 Some of these solutions require you to change the printer driver properties. The locations for specific properties vary by printer and by printer driver. Contact the printer manufacturer or refer to the printer documentation for more information.

Solution 1: Print as bitmap.

  1. Choose File > Print.

  2. Ensure you've a non-PostScript printer selected, then select the Advanced pane.

  3. Check Print as Bitmap and select the appropriate resolution for your printer.

Solution 2: Ensure that the printer has enough memory.

To print at 300 dpi, the printer should have at least 2 MB of available RAM. To print at 600 dpi, the printer should have at least 4‐6 MB of RAM. For instructions on determining available printer memory, see the printer documentation.

Solution 3: Use the printer's PostScript mode, if available.

For details, see the printer documentation.

Solution 4: (Windows only) Switch to a standard SVGA driver.

Switch to the standard Windows SVGA driver to determine if your third-party video driver causes the problem. If the error doesn't occur when you use the standard SVGA driver, then contact the video card manufacturer for an updated driver. If you already use the current version, then try using a different video resolution (e.g., 1024 x 768 instead of something higher).

If you can't get anything to print or export as PDF from any application, contact Apple Technical Support, Microsoft Technical Support, or the printer manufacturer. Always check the physical connection between the printer and the computer before calling, as the solution could be as simple as reconnecting a loose cable.

Also, consider what has changed on the system recently that could be affecting the printing or exporting process. For example, have you performed any of the following tasks lately?

  • Updated your hardware, or added or removed hardware components
  • Added, updated, or deleted software
  • Installed or deleted fonts
  • Connected to a network
  • Cleaned up or erased files from the hard drive
  • Encountered random system errors, or errors in other applications

Often, a change to the system directly corresponds to the appearance of a printing problem. Keep a record of changes made to the system as a resource for troubleshooting printing and other problems.

Related resources

Talk to us

We would love to hear from you. Share your thoughts with the Adobe InDesign Community

 Adobe

Saņemiet palīdzību ātrāk un vienkāršāk

Jauns lietotājs?