From the Pen tools group, select the Content-Aware Tracing Tool.
Photoshop provides multiple Pen tools to suit your use cases and creative style:
Use the Shift+P key combination to cycle through the tools in the Pen group.
You can use the pen tools in conjunction with the shape tools to create complex shapes. For more information about the modes in which you can draw with the Pen tools, see Drawing modes.
Before drawing with the Pen tool, you can create a new path in the Paths panel to automatically save the work path as a named path.
The Content-Aware Tracing Tool is being introduced as a Technology Preview in the October 2020 release of Photoshop and lets you create vector paths and selections by simply hovering over the edges of your image and clicking.
You can enable the Content-Aware Tracing Tool in Preferences > Technology Previews and then restart Photoshop.
Try out the Content-Aware Tracing Tool by following the below five simple steps:
From the Pen tools group, select the Content-Aware Tracing Tool.
Hover the cursor over the edge of an object to highlight it.
Different zoom levels will affect how Photoshop sees your image and thus how the tool identifies edges.
For instance, if you're working with a lower resolution image, zooming out may help Photoshop easier identify an edge. Zooming in (100% or more) will result in the tool using the default 1-1 pixel resolution for identifying the edges.
Click on the highlighted section to create a path.
To add to the path, hover over an adjacent edge to highlight a new section and hold the Shift key while clicking to extended the path. The pink line that appears indicates that you're adding a new section to the existing path.
To delete an area from the path, hold down the Alt key (Windows) or Option key (Mac) while you click. You can also click and drag in a direction to remove larger sections.
While adjusting the Detail slider, Photoshop displays a preview of the edges that Photoshop sees. Moving the slider to the right increases the amount of edges Photoshop detects and moving to the left decreases the amount of detected edges.
Tracing modes (Detailed, Normal, and Simplified) adjust how detailed or textured the image is prior to processing the tracing.
Use Tracing together with the Detail slider to achieve your desired edges.
The Curvature Pen tool lets you draw smooth curves and straight line segments with equal ease. Create custom shapes in your designs or define precise paths to effortlessly fine-tune your images using this intuitive tool. While doing so, create, toggle, edit, add, or remove smooth or corner points without ever having to switch tools.
From the Pen tools group, select the Curvature Pen tool.
To create the first anchor point, click or tap anywhere in the document.
Click/tap again to define the second anchor point and complete the first segment of the path. Click once (default) if you want the next segment of your path to be curved. Double-click if you want to draw a straight segment next.
The first segment of your path always appears as a straight line on the canvas initially. Depending on whether you draw a curved or a straight segment next, Photoshop adjusts it later. If the next segment you draw is curved, Photoshop makes the first segment curve smoothly in relation to the next segment.
(Curved path) Using a mouse or on a touch device, drag the pointer to draw the next segment of your path. While the mouse button is pressed down, optimize the curve of the segment. The previous segment is automatically adjusted to keep the curve smooth.
(Curved path) Release the mouse button to drop the anchor point and complete the second segment.
Draw additional segments and complete the path.
When you're done drawing, press the Esc key.
The simplest path you can draw with the standard Pen tool is a straight line, made by clicking the Pen tool to create two anchor points. By continuing to click, you create a path made of straight line segments connected by corner points.
The first segment you draw will not be visible until you click a second anchor point. (Select the Rubber Band option in Photoshop to preview path segments.) Also, if direction lines appear, you’ve accidentally dragged the Pen tool; choose Edit > Undo, and click again.
The last anchor point you add always appears as a solid square, indicating that it is selected. Previously defined anchor points become hollow, and deselected, as you add more anchor points.
To close the path, position the Pen tool over the first (hollow) anchor point. A small circle appears next to the Pen tool pointer when it is positioned correctly. Click or drag to close the path.
To leave the path open, you can also select a different tool.
You create a curve by adding an anchor point where a curve changes direction, and dragging the direction lines that shape the curve. The length and slope of the direction lines determine the shape of the curve.
Curves are easier to edit and your system can display and print them faster if you draw them using as few anchor points as possible. Using too many points can also introduce unwanted bumps in a curve. Instead, draw widely spaced anchor points, and practice shaping curves by adjusting the length and angles of the direction lines.
The first anchor point appears, and the Pen tool pointer changes to an arrowhead. (In Photoshop, the pointer changes only after you’ve started dragging.)
In general, extend the direction line about one third of the distance to the next anchor point you plan to draw. (You can adjust one or both sides of the direction line later.)
Hold down the Shift key to constrain the tool to multiples of 45°.
A. Positioning Pen tool B. Starting to drag (mouse button pressed) C. Dragging to extend direction lines
To create a C‑shaped curve, drag in a direction opposite to the previous direction line. Then release the mouse button.
To create an S‑shaped curve, drag in the same direction as the previous direction line. Then release the mouse button.
To change the direction of the curve sharply, release the mouse button, and then Alt-drag (Windows) or Option-drag (Mac OS) the direction point in the direction of the curve. Release the Alt (Windows) or Option (Mac OS) key and the mouse button, reposition the pointer where you want the segment to end, and drag in the opposite direction to complete the curve segment.
Alt-drag (Windows) or Option-drag (Mac OS) direction lines to break out the direction lines of an anchor point.
To close the path, position the Pen tool over the first (hollow) anchor point. A small circle appears next to the Pen tool pointer when it is positioned correctly. Click or drag to close the path.
Position the Pen tool over the selected endpoint. A small diagonal line, or slash, appears next to the Pen tool. To set the slope of the curved segment you’ll create next, click the anchor point, and drag the direction line that appears.
A. Straight segment completed B. Positioning Pen tool over endpoint C. Dragging direction point
A. Positioning Pen tool B. Dragging direction line C. New curve segment completed
Press Alt (Windows) or Option (Mac OS) to temporarily change the Pen tool to the Convert Point tool.
This process converts the smooth point to a corner point by splitting the direction lines.
A. Dragging a new smooth point B. Pressing Alt/Option to split direction lines while dragging, and swinging direction line up C. Result after repositioning and dragging a third time
To close a path, position the Pen tool over the first (hollow) anchor point. A small circle appears next to the Pen tool pointer when it is positioned correctly. Click or drag to close the path.
When you use the standard Pen tool, the following options are available in the options bar:
The Freeform Pen tool lets you draw as if you were drawing with a pencil on paper. Anchor points are added automatically as you draw. You do not determine where the points are positioned, but you can adjust them once the path is complete. To draw with greater precision, use the Pen tool.
Select the Freeform Pen tool .
To control how sensitive the final path is to the movement of your mouse or stylus, click the inverted arrow next to the shape buttons in the options bar, and enter a value between 0.5 and 10.0 pixels for Curve Fit. A higher value creates a simpler path with fewer anchor points.
Drag the pointer in the image. As you drag, a path trails behind the pointer. When you release the mouse, a work path is created.
To continue the existing freehand path, position the pen pointer on an end point of the path, and drag.
To complete the path, release the mouse. To create a closed path, drag the line to the initial point of the path (a circle appears next to the pointer when it is aligned).
The Magnetic Pen is an option of the Freeform Pen tool that lets you draw a path that snaps to the edges of defined areas in your image. You can define the range and sensitivity of the snapping behavior, as well as the complexity of the resulting path. The Magnetic Pen and Magnetic Lasso tools share many of the same options.
For Width, enter a pixel value between 1 and 256. The Magnetic Pen detects edges only within the specified distance from the pointer.
For Contrast, enter a percentage value between 1 and 100 to specify the contrast required between pixels for that area to be considered an edge. Use a higher value for low-contrast images.
For Frequency, enter a value between 0 and 100 to specify the rate at which the Pen sets anchor points. A higher value anchors the path in place more quickly.
If you are working with a stylus tablet, select or deselect Pen Pressure. When this option is selected, an increase in pen pressure causes the width to decrease.
The most recent segment of the border remains active. As you move the pointer, the active segment snaps to the strongest edge in the image, connecting the pointer to the last fastening point. Periodically, the Magnetic Pen adds fastening points to the border to anchor previous sections.
Alt-drag (Windows) or Option-drag (Mac OS) to draw a freehand path.
Alt-click (Windows) or Option-click (Mac OS) to draw straight segments.
Press the open square bracket key ([) to decrease the Magnetic Pen width by 1 pixel; press the close square bracket key (]) to increase the pen width by 1 pixel.
Press Enter (Windows) or Return (Mac OS) to end an open path.
Double-click to close the path with a magnetic segment.
Hold down Alt (Windows) or Option (Mac OS), and double-click to close the path with a straight segment.
Sign in to your account