- InDesign User Guide
- Get to know InDesign
- Introduction to InDesign
- Workspace
- Generative AI
- Introduction to InDesign
- Create and layout documents
- Documents and pages
- Create documents
- Work with parent pages
- Work with document pages
- Set page size, margins, and bleed
- Work with files and templates
- Convert PDFs to InDesign files in InDesign (Beta)
- Create book files
- Add basic page numbering
- Number pages, chapters, and sections
- Convert QuarkXPress and PageMaker documents
- Share content
- Understand a basic managed-file workflow
- Save documents
- Grids
- Layout aids
- Documents and pages
- Add content
- Text
- Add text to frames
- Threading text
- South-East Asian Scripts
- Arabic and Hebrew features in InDesign
- Create type on a path
- Bullets and numbering
- Glyphs and special characters
- Text composition
- Text variables
- Generate QR codes
- Edit text
- Align text
- Wrap text around objects
- Anchored objects
- Linked content
- Format paragraphs
- Format characters
- Typography
- Format text
- Review text
- Spell check and language dictionaries
- Add references
- Styles
- Tables
- Interactivity
- Graphics
- Color and transparency
- Text
- Find and replace
- Share
- Publish
- Place, export, and publish
- Printing
- Extend InDesign
- Automation
- Troubleshooting
For detailed information and instructions, click the links below.
Create separations
To reproduce color and continuous-tone images, printers usually separate artwork into four plates—one plate for each of the cyan (C), yellow (Y), magenta (M), and black (K) portions of the image. When inked with the appropriate color and printed in register with one another, these colors combine to reproduce the original artwork. The process of dividing the image into two or more colors is called color separating, and the films from which the plates are created are called the separations.
Separation workflows
Adobe InDesign supports two common PostScript workflows; the main difference is where separations are created—at the host computer (the system using InDesign and the printer driver), or at the output device’s RIP (raster image processor). Another alternative is a PDF workflow.
Host-based separations
In the traditional host-based, preseparated workflow, InDesign creates PostScript information for each of the separations required for the document, and sends that information to the output device.
In‑RIP separations
In the newer RIP-based workflow, a new generation of PostScript RIPs performs color separations, trapping, and even color management at the RIP, leaving the host computer free to perform other tasks. This approach takes less time for InDesign to generate the file, and minimizes the amount of data transmitted for any given print job. For example, instead of sending PostScript information for four or more pages to print host-based color separations, InDesign sends the PostScript information for a single composite PostScript file for processing in the RIP.
Prepare your document for color separations
-
Correct any color problems in your artwork.
-
Set overprint options.
-
Create trapping instructions to compensate for misregistration on press.
-
Preview color separations on your screen.Note:
Steps 1–4 are recommended but not required in producing color separations.
-
Choose File > Print to display the Print dialog box.
-
If you’ve created a printer preset with the appropriate separation settings, select it in the Print Preset menu at the top of the Print dialog box.
-
Choose a printer or PostScript file in the Printer menu.
-
If you’re printing to a PostScript file, choose the PPD for the device that will output the separations.
-
To view or change existing print options, click a section name on the left side of the Print dialog box.
-
Before you deliver your document to a service provider, proof the separations.
-
Print or save separations.
Output spot colors
You can use custom inks, called spot colors, in addition to, or in place of, process colors. For example, instead of using the four process colors to reproduce artwork consisting of black text and bluish-green line drawings, you could use two spot colors—one of black, and one representing the exact shade of green. You can also use spot color inks to produce colors not reproducible by CMYK inks, such as varnishes or fluorescent and metallic colors. In addition, you can mix two or more spot colors together or mix spot colors with process colors to create mixed inks.
You can color artwork with process colors, spot colors, or a combination of both. When printing separations, you can convert spot colors to their process color equivalents so that they will be printed on the CMYK plates.
View the process color equivalents of a spot color
-
Select the spot color in the Swatches panel.
-
Choose CMYK in the Color panel menu.
The CMYK equivalent values for the spot color are displayed in the Color panel.
You can also hold the pointer over the spot color in the Swatches panel. The formula for the color will appear in the tool tip.
Print an object on all color plates
If you want an object to print on all plates in the printing process, including spot color plates, you can apply registration color to the object. Registration color is used for crop marks and trim marks. For composite output, objects with registration color applied will print as C 100, M 100, Y 100, and K 100. For separations, these objects will print as 100% on each plate.
-
Select the objects to which you want to apply registration color.
-
Choose Window > Swatches.
-
In the Swatches panel, click the Registration color swatch .
Print gradients as separations
Consider the following when producing separations for documents with gradients:
A gradient created in InDesign that contains a combination of spot and process colors will be separated onto both the process and spot plates.
A gradient that contains process colors will be separated onto the process plates.
A gradient that contains two tints of the same spot color will be separated onto a single spot color plate.
To create a gradient that separates on one piece of film between a spot color and white, create a gradient fill between the spot color and the Paper swatch in the Swatches panel.
If you create a gradient between two spot colors, you should assign different screen angles to those spot colors. If two spot colors have the same screen angle, they will overprint each other. If you’re not sure what the angles should be, consult with your prepress service provider.
Print a composite
You can print a color or grayscale composite proof to check colors in your document. A composite image can help you design and proof your layout before you print final (and costly) separations.
When InDesign prints a composite, it prints all of the colors used in the file on one plate, regardless of whether any individual colors are selected.
Consider the following issues when printing composites:
- While no proof will give you an exact representation of your final output, you can greatly improve its accuracy by calibrating all the devices you use to create a document (such as scanners, monitors, and printers). If the devices are calibrated, the color management system can help you get predictable and consistent color.
- Any overprinting options that you’ve selected in the document will print correctly on a printer that supports overprinting. Since most desktop printers don’t support overprinting, you can simulate the effects of overprinting by selecting Simulate Overprint in the Output section of the Print dialog box.
Selecting Simulate Overprint will convert spot colors to process colors for printing. If you intend to use a file for separations on a RIP, or for final output, do not select this option.
When you print to a black-and-white printer, InDesign produces a grayscale composite version of the pages. If the document contains color, InDesign prints visually correct grays to simulate that color. For example, the gray that simulates a 20% tint of yellow is lighter than a 20% tint of black, since yellow is visually lighter than black.
When you print a book with chapters containing conflicting spot inks or trap styles, you can instruct InDesign to synchronize settings with the master document.
If you’re using color management with the Book feature, make sure that each document in the book uses the same color management settings in the Color Settings dialog box.
Remember that, like monitors, color printers vary greatly in color reproduction quality; thus, proofs from your service provider are the best way to verify how the finished piece will look.
Preview color separations
You can preview color separations, ink coverage limits, and overprinting using the Separations Preview panel. Previewing separations on your monitor lets you check the following:
Varnishes and other coatings
Since varnishes are transparent, they can be difficult to preview on‑screen. When you preview a varnish separation by itself, the varnished areas appear in black.
Rich black
Previewing separations lets you identify areas that will print as rich black, or process black (K) ink mixed with color inks for increased opacity and richer color.
Ink coverage
Too much ink on the paper can cause drying problems. Ask your commercial printer for the maximum ink coverage of the press you will be printing on. You can then preview the document to identify areas where ink coverage exceeds the press’s limit.
Overprinting
You can preview how blending, transparency, and overprinting will appear in color-separated output.
You can also see overprinting effects when you output to a composite printing device. This is useful for proofing color separations.
While previewing separations on your monitor can help you detect problems without the expense of printing separations, it does not let you preview trapping, emulsion options, printer’s marks, and halftone screens and resolution. Work with your commercial printer to verify these settings using integral or overlay proofs.
Objects on hidden layers are not included in an on‑screen preview.
Preview separation plates
-
Choose Window > Output > Separations Preview.
-
For View, choose Separations.
-
Do any of the following:
To view a single separation and hide all others, click the name of the separation you want to view. By default, areas of coverage appear in black. To change this, deselect Show Single Plates In Black on the panel menu.
To view one or more separations, click the empty box to the left of each separation name. Each separation appears in its assigned color.
To hide one or more separations, click the eye icon to the left of each separation name.
To view all process plates at once, click the CMYK icon .
To view all separations at once, click and drag the pointer across all of the eye icons (or empty boxes) next to the separation names.
The Separations Preview panel can also be controlled using keyboard shortcuts.
Preview ink coverage
-
Choose Window > Output > Separations Preview.
-
For View, choose Ink Limit. Enter a value for maximum ink coverage in the box that appears next to the View menu. (Ask your commercial printer for the correct value to enter.)
-
Verify ink coverage in the document preview. Areas that exceed the ink coverage limit are shown in shades of red (dark red areas exceed the ink coverage limit by more than light red areas). All other areas appear in grayscale.
-
To check ink coverage for a specific area, use the pointer to hover over that area in the document window. Ink coverage percentages appear in the panel next to each ink name.
You can adjust ink coverage by converting some spot colors to process colors. To adjust ink coverage in placed graphics, edit the graphics in their source applications.
Return to normal view
-
Choose Window > Output > Separations Preview.
-
For View, choose Off.
More like this
- Print or save separations
- Export to PDF for printing
- About overprinting
- Proofing color separations
- Print or save separations
- Separate spot colors as process
- Mixing inks
- Printer’s marks and bleeds
- About halftone screen frequency
- Improving gradients and color blends in print
- Synchronize book documents
- Use color management when printing
- Overprinting page items
- Keys for using the Separations Preview panel
- Separate spot colors as process