To draw precise paths as straight lines or smooth, flowing curves, use the Pen tool. When you draw with the Pen tool, click to create points on straight line segments and drag to create points on curved line segments. Adjust straight and curved line segments by adjusting points on the line.
The following video tutorial demonstrates how to use Pen tool in Animate:
The Pen tool provides feedback about its current drawing state by displaying different pointers. The various drawing states are indicated by the following pointers:
Initial Anchor Point pointer
The first pointer you see when you select the Pen tool. Indicates that the next mouse click on the Stage will create an initial anchor point, which is the beginning of a new path (all new paths begin with an initial anchor point). Any existing drawing paths are terminated.
Sequential Anchor Point pointer
Indicates that the next mouse click will create an anchor point with a line connecting it to the previous anchor point. This pointer is displayed during the creation of all user-defined anchor points except the initial anchor point of a path.
Add Anchor Point pointer
Indicates that the next mouse click will add an anchor point to an existing path. To add an anchor point, the path must be selected, and the Pen tool must not be over an existing anchor point. The existing path is redrawn based on the additional anchor point. Only one anchor point can be added at a time.
Delete Anchor Point pointer
Indicates that the next mouse click on an existing path will remove an anchor point. To remove an anchor point, the path must be selected with the Selection tool, and the pointer must be over an existing anchor point. The existing path is redrawn based on the removal of the anchor point. Only one anchor point can be removed at a time.
Continue Path pointer
Extends a new path from an existing anchor point. For this pointer to be activated, the mouse must be over an existing anchor point on a path. This pointer is only available when you are not currently drawing a path. The anchor point does not have to be one of the terminal anchor points of a path; any anchor point can be the location of a continued path.
Close Path pointer
Closes the path you’re drawing on the starting point of the path. You can only close a path that you are currently drawing, and the existing anchor point must be the starting anchor point of the same path. The resulting path does not have any specified fill color settings applied to the enclosed shape; apply fill color separately.
Join Paths pointer
Similar to the Close Path Tool except that the mouse must not be over the initial anchor point of the same path. The pointer must be over either of the terminal points of a unique path. The segment may or may not be selected.
note: Joining paths may or may not result in a closed shape.
Retract Bezier Handle pointer
Appears when the mouse is over an anchor point whose Bezier handles are displayed. Clicking the mouse retracts the Bezier handles and causes the curved path across the anchor point to revert to straight segments.
Convert Anchor Point pointer
Converts a corner point without direction lines to a corner point with independent direction lines. To enable the Convert Anchor Point pointer, use the Shift + C modifier keys to toggle the Pen tool.
For a video tutorial about the Pen tool, see www.adobe.com/go/vid0120.
The simplest path you can draw with the Pen tool is a straight line, made by clicking the Pen tool to create two anchor points. Continue to click to create a path made of straight line segments connected by corner points.
-
Position the Pen tool where the straight segment is to begin, and click to define the first anchor point. If direction lines appear, you accidentally dragged the Pen tool; choose Edit > Undo and click again.
Note:
The first segment you draw is not visible until you click a second anchor point (unless you’ve specified Show Pen Preview in the Drawing category of the Preferences dialog box).
-
To complete an open path, double-click the last point, click the Pen tool in the Tools panel, or Control-click (Windows) or Command-click (Macintosh) anywhere away from the path.
To close the path, position the Pen tool over the first (hollow) anchor point. A small circle appears next to the Pen
tool
pointer when it is positioned correctly. Click or drag to close
the path.To complete the shape as is, select Edit > Deselect All, or select a different tool in the Tools panel.
To create a curve, add an anchor point where a curve changes direction and drag the direction lines that shape the curve. The length and slope of the direction lines determine the shape of the curve.
Curves are easier to edit and your system can display and print them faster if you draw them using as few anchor points as possible. Using too many points can also introduce unwanted bumps in a curve. Instead, draw widely spaced anchor points, and practice shaping curves by adjusting the length and angles of the direction lines.
-
In general, extend the direction line about one third of the distance to the next anchor point you plan to draw. (You can adjust one or both sides of the direction line later.)
Hold down the Shift key to constrain the tool to multiples of 45°.
Drawing the first point in a curve
A. Positioning Pen tool B. Starting to drag (mouse button pressed) C. Dragging to extend direction lines. -
To create a series of smooth curves, continue dragging the Pen tool from different locations. Place anchor points at the beginning and end of each curve, not at the tip of the curve.
Note:
To break out the direction lines of an anchor point, Alt-drag (Windows) or Option-drag (Macintosh) direction lines.
-
To close the path, position the Pen tool over the first (hollow) anchor point. A small circle appears next to the Pen tool pointer
when
it is positioned correctly. Click or drag to close the path.To leave the path open, Ctrl-click (Windows) or Command-click (Macintosh) anywhere away from all objects, select a different tool, or choose Edit > Deselect All.
Adding anchor points can give you more control over a path or it can extend an open path. However, it’s a good idea not to add more points than necessary. A path with fewer points is easier to edit, display, and print. To reduce the complexity of a path, delete unnecessary points.
The toolbox contains
three tools for adding or deleting points: the Pen tool 
, the
Add Anchor Point tool 
, and
the Delete Anchor Point tool 
.
By default, the Pen tool changes to the Add Anchor Point tool as you position it over a selected path, or to the Delete Anchor Point tool as you position it over an anchor point.
Note:
Don’t use the Delete, Backspace, and Clear keys or the Edit > Cut or Edit > Clear commands to delete anchor points; these keys and commands delete the point and the line segments that connect to that point.
When you draw a curve with the Pen tool, you create smooth points—anchor points on a continuous, curved path. When you draw a straight line segment or a straight line connected to a curved segment, you create corner points—anchor points on a straight path or at the juncture of a straight and a curved path.
By default, selected smooth points appear as hollow circles, and selected corner points appear as hollow squares.
To move an anchor point, drag the point with the Subselection tool
.To nudge an anchor point or points, select the point or points with the Subselection tool and use the arrow keys to move the point or points. Shift-click to select multiple points.
To add an anchor point, click a line segment with the Pen tool. A plus (+) sign appears next to the Pen tool
if
an anchor point can be added to the selected line segment. If the
line segment is not yet selected, click it with the Pen tool to
select it, and then add an anchor point.
Deleting unneeded anchor points on a curved path optimizes the curve and reduces the resulting SWF file size.
To delete a corner point, click the point once with the Pen tool. A minus (-) sign appears next to the Pen tool if an anchor point can be deleted from the selected line segment. If the line segment is not yet selected, click it with the Pen tool to select it, and then delete the anchor point.
To delete a smooth point, click the point once with the Pen tool. A minus (-) sign appears next to the Pen tool if an anchor point can be deleted from the selected line segment. If the line segment is not yet selected, click it with the Pen tool to select it, and then delete the corner point. (Click once to convert the point to a corner point, and once more to delete the point.)
To convert segments in a line from straight segments to curve segments, convert corner points to smooth points. You can also do the reverse.
To convert a corner point to a smooth point, use the Subselection tool to select the point, then Alt‑drag (Windows) or Option-drag (Macintosh) the point to place the tangent handles.
To convert a smooth point to a corner point, click the point with the Pen tool. The carat ^ marker next to the pointer
indicates
when it is over the smooth point.
To change the angle or length of the segment or adjust curved segments to change the slope or direction of the curve, adjust straight segments.
When you move a tangent handle on a smooth point, the curves on both sides of the point adjust. When you move a tangent handle on a corner point, only the curve on the same side of the point as the tangent handle adjusts.
To adjust a straight segment, select the Subselection tool
, and select a straight segment. Use the Subselection tool to drag an anchor point on the segment to a new position.To adjust a curve segment, select the Subselection tool and drag the segment.
note: When you click the path, Animate shows the anchor points. Adjusting a segment with the Subselection tool can add points to the path.
To adjust points or tangent handles on a curve, select the Subselection tool, and select an anchor point on a curved segment.
To adjust the shape of the curve on either side of the anchor point, drag the anchor point, or drag the tangent handle. To constrain the curve to multiples of 45º, Shift-drag. To drag tangent handles individually, Alt‑drag (Windows) or Option-drag (Macintosh).
Specify preferences for the appearance of the Pen tool pointer, for previewing line segments as you draw, and for the appearance of selected anchor points. Selected line segments and anchor points use the outline color of the layer on which the lines and points appear.
-
Show Pen Preview
Previews line segments as you draw. A preview of the line segment appears as you move the pointer around the Stage, before you click to create the end point of the segment. If this option is not selected, a line segment does not appear until you create the end point.
Show Solid Points
Displays selected anchor points as hollow and deselected anchor points as solid. If this option is not chosen, selected anchor points are solid, and deselected anchor points are hollow.
Show Precise Cursors
Specifies that the Pen tool pointer appears as a cross-hair pointer rather than the default Pen tool icon, for more precise placement of lines. To display the default Pen tool icon with the Pen tool, deselect the option.
note: To switch between the cross-hair pointer and the default Pen tool icon, press Caps Lock.
Twitter™ and Facebook posts are not covered under the terms of Creative Commons.