دليل المستخدم إلغاء

Work with image tone and color

  1. Lightroom Classic User Guide
  2. Introduction to Lightroom Classic
    1. What's new in Lightroom Classic
    2. Lightroom Classic system requirements
    3. Lightroom Classic | Common Questions
    4. Lightroom Classic Key Concepts
    5. Lightroom Classic tutorials
    6. Set Preferences for working in Lightroom Classic
    7. Reset Preferences for working in Lightroom Classic
  3. Workspace
    1. Workspace basics
    2. Display the Library on a second monitor
    3. Personalize identity plates and module buttons
    4. Watermark your photos in Lightroom Classic
    5. Color management
  4. Import photos
    1. Specify import options
    2. Set import preferences
    3. Import photos from a camera or card reader
    4. Import photos from a folder on a hard drive
    5. Import photos automatically
    6. Import photos from Photoshop Elements
    7. Import photos from a tethered camera
    8. The Filename Template Editor and Text Template Editor
  5. Organize photos in Lightroom Classic
    1. Face recognition
    2. Work with photo collections
    3. Group photos into stacks
    4. Flag, label, and rate photos
    5. Use keywords
    6. Metadata basics and actions
    7. Find photos in the catalog
    8. Work with video in Lightroom Classic
    9. Advanced metadata actions
    10. Use the Quick Develop panel
  6. Process and develop photos
    1. Develop module basics
    2. Create panoramas and HDR panoramas
    3. Flat-Field Correction
    4. Correct distorted perspective in photos using Upright
    5. Improve image quality using Enhance
    6. Work with image tone and color
    7. Masking
    8. Apply local adjustments
    9. HDR photo merge
    10. Develop module options
    11. Retouch photos
    12. Cure red eye and pet eye effects
    13. Use the Radial Filter tool
    14. Adjustments with Lens Blur
    15. Edit and Export in HDR
    16. Remove Tool
  7. Viewing photos
    1. View photos
    2. Browse and compare photos
    3. Set Library view options
    4. Share photos for comments and feedback
    5. Smart Previews
  8. Export photos
    1. Export files to disk or CD
    2. Export photos from Lightroom Classic
    3. Publish photos online
    4. Export to hard drive using publish services
    5. Presets for export, and other settings
  9. Work with external editors
    1. External Editing preferences
    2. Open and edit Lightroom Classic photos in Photoshop
  10. Manage catalogs and files
    1. How Lightroom Classic catalogs work
    2. Create and manage catalogs
    3. Back up a catalog
    4. Locate missing photos
    5. Create and manage folders
    6. Manage photos within folders
  11. Maps
    1. Work with the Map module
  12. Photo books
    1. Create photo books
  13. Slideshows
    1. Create slideshows
    2. Slideshow module panels and tools
    3. Specify the slide layout
    4. Add overlays to slides
    5. Play and export slideshows
  14. Print photos
    1. Print module basics
    2. Print module layouts and templates
    3. Work with print job options and settings
  15. Web galleries
    1. Create web galleries
    2. Use the Web module panels and tools
    3. Work with web gallery layouts
    4. Work with web gallery templates and settings
    5. Preview, export, and upload web photo galleries
  16. Keyboard shortcuts
    1. Keyboard shortcuts
  17. Content Authenticity 
    1. Content Authenticity in Lightroom Classic
  18. Lightroom and Adobe services
    1. Creative Cloud Libraries
    2. Using Adobe Stock in Creative Cloud apps
  19. Troubleshooting 
    1. Fixed Issues
    2. Known Issues
  20. Technical Support
    1. Performance Guidelines
      1. Basic troubleshooting steps to fix issues in Lightroom Classic
      2. Optimize performance
      3. Keep Lightroom up to date
      4. Preference file and other file locations | Lightroom Classic
      5. Allow Permissions to Lightroom Classic on macOS
    2.  Technical issues
      1. GPU Issues
        1. Troubleshoot graphics processor (GPU) and graphics driver issues | Lightroom Classic
        2. Lightroom Classic GPU FAQ
      2. Startup Issues
        1. Windows | Lightroom doesn't start
        2. Error: Lightroom catalog cannot be opened
        3. Error: 'Unexpected error opening catalog' occurs in Lightroom after Windows 10 upgrade
        4. "Assertion failed" update error | Windows
        5. Error MSVCR110.dll opening apps in Windows 10
      3. Rendering Issues
        1. Troubleshoot issues with Develop module
      4. Stability Issues
        1. Troubleshoot crash or freeze in Lightroom Classic
      5. Miscellaneous Issues
        1. FAQ | Color in Lightroom Classic
        2. Lightroom desktop and mobile apps unavailable to Education memberships | Kivuto
    3. Workflow Issues
      1. Catalog Issues
        1. Error : Lightroom catalog cannot be opened
        2. Troubleshoot corrupt catalog
        3. Locate missing photos
        4. Recover catalog and images after resetting preferences
        5. Lightroom Classic catalog FAQ
      2. Sync Issues
        1. Lightroom Classic sync FAQ

Apply a profile to your image

Profiles allow you to control how colors and tonality are rendered in your photos. The profiles provided in the Profile area of the Basic panel are intended to serve as a starting point or foundation for making image edits.

Applying a profile on your photo doesn't change or overwrite the value of other edit control sliders. Therefore, you can make edits to your photos as you like and then choose to apply a profile on top of your edited image.

Browse and apply profiles

  1. In the Basic panel of the Develop module, locate the Profile area (below the Treatment area) at the top. 

  2. Use the Profile pop-up menu to quickly access Adobe profiles and the profiles that you've marked as favorite. (explained in Step 3 below).

    To browse and apply other creative profiles in the Profile Browser, do any of the following:

    • Choose Browse from the Profile pop-up menu.
    • Click the profile browser icon  on the right.
    Profile area in the Basic panel
    Profile area in the Basic panel

    Profile Browser
    Profile Browser

    ملاحظة:

    When you import photos, Adobe Color and Adobe Monochrome profiles are applied by default to color and black-and-white photos respectively.

  3. In Profile Browser, expand any of the profile groups to view the profiles available in that group.

    To expand all the profile groups in Profile Browser, right-click (Win) / Control-click (Mac) any profile group and choose Expand All from the menu.

    To collapse all the profile groups in Profile Browser, right-click (Win) / Control-click (Mac) any profile group and choose Collapse All from the menu.

    ملاحظة:

    In Profile Browser, use the pop-up menu above the Favorites profile groups to view the profiles as a List, as Grid thumbnails, or Large thumbnails. You can also filter the profiles to be displayed by 'type' - Color or B&W.

    Favorites: Displays profiles that you've marked as favorite. See Add a profile to Favorites.

    Profiles for raw photos

    The following profile groups appear when you are editing a raw photo.

    Adobe Raw: Adobe Raw profiles significantly improve color rendering and provide a good starting point for editing your raw images. Adobe Color profile─which is designed to provide a good color/tone balance for any image─is applied by default to the raw photos that you import in Lightroom Classic.

    Camera Matching: Displays profiles based on the camera make/model of your raw photo. Use Camera Matching profiles if you prefer the color rendering in your raw files to match what you see on your camera's display screen.

    Legacy: Displays legacy profiles that were also provided in the earlier versions of the Lightroom app.

    Adobe Raw profiles
    Adobe Raw profiles

    Creative profiles for raw and non-raw photos

    Creative profiles work on any file type including raw photos, JPEGs, and TIFFs. These profiles are designed to create a certain style or effect in your photo.

    Artistic: Use these profiles if you want the color rendering in your photo to be more edgy, with stronger color shifts.

    B&W: Use these profiles to get optimal tone shifts required for black and white work.

    Modern: Use these profiles to create unique effects that fit in with the modern photography styles.

    Vintage: Use these profiles to replicate the effects of vintage photos.

    Artistic profiles
    Artistic profiles

    Note:

    When you apply any of the Artistic, B&W, Modern, and Vintage profiles, Lightroom Classic provides an additional Amount slider that allows to control profile intensity. For other profiles, the Amount slider is dimmed/inactive.

  4. Move the pointer over any profile to preview its effect in your photo. Click the profile to apply it to your photo.

    To go back to the Basic panel, click Close at the upper-right corner of the Profile Browser panel.

Import profiles

  1. In the Basic panel of the Develop module, locate the Profile area (below the Treatment area) at the top. 

  2. Do any of the following:

    • Choose Browse from the Profile pop-up menu.
    • Click the profile browser icon  on the right.
  3. In Profile Browser, click the plus (+) icon at the upper-left corner and choose Import Profiles from the menu.

    Import profiles option in Profile Browser
    Import profiles option in Profile Browser

  4. In the import dialog that appears, select the profiles that you want to import. You can also import a .zip file containing profiles.

    Note:

    You can import XMP presets and profiles, DCP profiles, and LCP profiles as part of a zip file. However, .lrtemplate presets can't be imported as part of a zip file.

  5. Click OK.

ملاحظة:

To manually install or copy your profiles, see Manually install profiles.

Add a profile to Favorites

To add a profile to Favorites profile group:

  • When browsing the profiles in the Grid or Large view, hover on the profile thumbnail and click the star icon that appears at the upper-right corner of the thumbnail. 
  • When browsing the profiles in the List view, hover on the profile and click the star icon that appears next to the profile's name.

You can also access your favorite profiles from the Profiles pop-menu. 

Manage profiles

Using the Manage Profiles option, you can show or hide various profile groups that are displayed in the Profile browser - Basic, Adobe Raw, Camera Matching, Legacy, Artistic, B&W, Modern, Vintage, or any other profiles that you've imported.

To show/hide profile groups, follow the steps below:

  1. In Profile Browser, right-click (Win) / Control-click (Mac) any profile group and choose Manage Profiles from the menu.

  2. In the Manage Profiles dialog, select the profile groups that you want to show in Profile Browser. Deselect the profile groups that you want to hide from Profile Browser.

    Manage Profiles
    Manage Profiles

  3. Click Save.

    Profile Browser now displays only those profile groups which you've selected using the Manage Profiles dialog.

    To show all the hidden profile groups, you can right-click (Win) / Control-click (Mac) any profile group in Profile Browser and choose Reset Hidden Profiles from the menu.

Set the white balance

White Balance refers to the color created in your photo from the temperature of your light source. For example, a noon day sun will cast a very warm, yellow color whereas some light bulbs will cast a very cool, blue color in your photo.

You can adjust the white balance of a photo to reflect the lighting conditions under which it was taken—daylight, tungsten, flash, and so on.

You can either choose a white balance preset option or click a photo area that you want to specify as a neutral color. Lightroom Classic adjusts the white balance setting, and then you can fine-tune it using the sliders provided.

ملاحظة:

White balance preset options are available only for raw and DNG photos. White balance for all photos can be edited using the sliders.

Choose a white balance preset option

In the Basic panel of the Develop module, choose an option from the WB pop-up menu. As Shot uses the camera's white balance settings, if they are available. Auto calculates the white balance based on the image data.

Lightroom Classic applies the white balance setting and moves the Temp and Tint sliders in the Basic panel accordingly. Use these sliders to fine-tune the color balance. See Fine-tune the white balance using the Temp and Tint controls.

ملاحظة:

If the camera's white balance settings are not available, then the Auto option is the default.

Specify a neutral area in the photo

  1. In the Basic panel of the Develop module, click the White Balance Selector tool  to select it, or press the W key.
  2. Move the White Balance Selector into an area of the photo that should be a neutral light gray. Avoid spectral highlights or areas that are 100% white.
  3. Set options in the toolbar as needed.

    Auto Dismiss

    Sets the White Balance Selector tool to dismiss automatically after clicking only once in the photo.

    Show Loupe

    Displays a close-up view and the RGB values of a sampling of pixels under the White Balance Selector.

    Scale Slider

    Zooms the close-up view in the Loupe.

    Done

    Dismisses the White Balance Selector tool, and the pointer changes to the Hand or Zoom-in tool by default.

    ملاحظة:

    The Navigator displays a preview of the color balance as you move the White Balance Selector over different pixels.

  4. When you find an appropriate area, click it.

    The Temp and Tint sliders in the Basic panel adjust to make the selected color neutral, if possible.

Fine-tune the white balance using the Temp and Tint controls

In the Basic panel of the Develop module, adjust the Temp and Tint sliders.

Temp

Temp or Temperature sets how yellow/warm or blue/cool your photo looks. Use Temp to fine-tune the white balance using the Kelvin color temperature scale. Move the slider to the left to make the photo appear cooler, and right to warm the photo colors.

You can also set a specific Kelvin value in the Temp text box to match the color of the ambient light. Click the current value to select the text box and enter a new value. For example, photographic tungsten lights are often balanced at 3200 Kelvin. If you shoot under photo tungsten lights and set the image temperature to 3200, your photos should appear color balanced.

One of the benefits of working with raw files is that you can adjust the color temperature as if you were changing a setting in a camera during capture, allowing a broad range of settings. When working with JPEG, TIFF, and PSD files, you work in a scale of -100 to 100 rather than the Kelvin scale. Non-raw files such as JPEG or TIFF include the temperate setting in the file, so the temperate scale is more limited.

Tint

Tint sets how green or magenta your photo is. Use Tint to fine-tune the white balance to compensate for a green or magenta tint. Move the slider to the left (negative values) to add green to the photo; move it to the right (positive values) to add magenta.

Tip: If you see a green or magenta color cast in the shadow areas after adjusting the temperature and tint, try removing it by adjusting the Shadows Tint slider in the Camera Calibration panel.

Adjust overall image tonal scale

You adjust the overall image tonal scale using the tone controls in the Basic panel. As you work, keep an eye on the end points of the histogram, or use the shadow and highlight clipping previews.

  1. (Optional) In the Tone area of the Basic panel, click Auto to set the overall tonal scale. Lightroom Classic sets the sliders to maximize the tonal scale and minimize highlight and shadow clipping.

  2. Adjust the tone controls:
    ملاحظة:

    The tone controls that are available depend on whether you are working in Process Version 2012, 2010, or 2003, as noted.

    ملاحظة:

    You can increment the slider values by selecting the value and using the Up and Down arrow keys. Double-clicking the slider control resets the value to zero.

    Exposure

    (All) Sets the overall image brightness. Adjust the slider until the photo looks good and the image is the desired brightness.

    Exposure values are in increments equivalent to aperture values (f‑stops) on your camera. An adjustment of +1.00 is similar to opening the aperture 1 stop. Similarly, an adjustment of ‐1.00 is similar to closing the aperture 1 stop.

    Contrast

    (All) Increases or decreases image contrast, mainly affecting midtones. When you increase contrast, the middle-to-dark image areas become darker, and the middle-to-light image areas become lighter. The image tones are inversely affected as you decrease contrast.

    Highlights

    (PV2012) Adjusts bright image areas. Drag to the left to darken highlights and recover "blown out" highlight details. Drag to the right to brighten highlights while minimizing clipping.

    Shadows

    (PV2012) Adjusts dark image areas. Drag to the left to darken shadows while minimizing clipping. Drag to the right to brighten shadows and recover shadow details.

    Whites

    (PV2012) Adjusts white clipping. Drag to the left to reduce clipping in highlights. Drag to the right to increase highlight clipping. (Increased clipping may be desirable for specular highlights, such as metallic surfaces.)

    Blacks

    (PV2012) Adjusts black clipping. Drag to the left to increase black clipping (map more shadows to pure black). Drag to the right to reduce shadow clipping.

    Blacks

    (PV2010 and PV2003) Specifies which image values map to black. Moving the slider to the right increases the areas that become black, sometimes creating the impression of increased image contrast. The greatest effect is in the shadows, with much less change in the midtones and highlights.

    Recovery

    (PV2010 and PV2003) Reduces the tones of extreme highlights and attempts to recover highlight detail lost because of camera overexposure. Lightroom Classic can recover detail in raw image files if one or two channels are clipped.

    Fill Light

    (PV2010 and PV2003) Lightens shadow to reveal more detail while maintaining blacks. Take care not to over apply the setting and reveal image noise.

    Brightness

    (PV2010 and PV2003) Adjusts image brightness, mainly affecting midtones. Adjust Brightness after setting Exposure, Recovery, and Blacks sliders. Large brightness adjustments can affect shadow or highlight clipping, so you may want to readjust the Exposure, Recovery, or Blacks slider after adjusting brightness.

Adjust the tonal scale using the histogram

About histograms

A histogram represents the number of pixels in a photo at each luminance percentage. A histogram stretching from the panel's left side to the right side indicates a photo that takes full advantage of the tonal scale. A histogram that doesn't use the full tonal range can result in a dull image that lacks contrast. A histogram with spikes at either end indicates a photo with shadow or highlight clipping. Clipping can result in the loss of image detail. A histogram uses semi-transparency and lines to indicate where the different channels overlap.

Lightroom Classic CC tonal scale using the histogram
The left side of the histogram represents pixels with 0% luminance; the right side represents 100% luminance.

A histogram comprises three layers of color representing the Red, Green, and Blue color channels. Gray appears when all three channels overlap; yellow, magenta, and cyan appear when two of the RGB channels overlap (yellow equals the Red + Green channels, magenta equals the Red + Blue channels, and cyan equals the Green + Blue channels).

Adjust images using the histogram

In the Develop module, specific areas of the Histogram panel are related to the tone sliders in the Basic panel. You can make adjustments by dragging in the histogram. Your adjustments are reflected in the Basic panel sliders.

  1. Move the pointer into an area of the histogram you want to adjust. The affected area is highlighted, and the affected tone control is displayed in the lower left of the panel.

  2. Drag the pointer left or right to adjust the corresponding slider value in the Basic panel.

View RGB color values

The area under the histogram in the Develop module displays the RGB color values for individual pixels appearing under the Hand or Zoom tool when you move it over the photo.

You can use this information to determine whether any areas of the photo are clipped, such as whether an R, G, or B value is 0% black or 100% white. If at least one channel in the clipped area has color, then you might be able to use it to recover some detail in the photo.

View RGB and LAB color values in Reference View

While working in the Reference View in the Develop module, the area under the histogram displays the RGB/LAB color values for individual pixels appearing under the Hand or Zoom tool when you move it over the Reference/Active photo.

If the dimensions of the Reference photo and the Active photo/cropped Active photo match, the readings are displayed in the following manner:

Reference/Active R [Reference value]/[Active value] G [Reference value]/[Active value] B [Reference value]/[Active value] %

RGB color value readings in Reference View
RGB color value readings in Reference View

   
  • If the dimensions of the Reference and Active photos do not match, only the color value for the image you are currently hovering on is displayed. The color value for the other image is displayed as '- -'.
  • If either the Reference photo or the Active is not set currently, its color value is displayed as '--'.

When you toggle the Before view of the Active photo, the color values are displayed in a similar manner for the Reference/Active (Before) photos. 

Reference/Active (Before) R [Reference value]/[Active Before value] G [Reference value]/[Active Before value] B [Reference value]/[Active Before value] %

By default, RGB color values are displayed. To display the LAB color values, right-click the histogram and choose Show Lab Color Values.

For more details about the Before view, see View Before and After Photos.

Preview highlight and shadow clipping

You can preview tonal clipping in a photo as you work on it. Clipping is the shifting of pixel values to the highest highlight value or the lowest shadow value. Clipped areas are either completely white or completely black, and have no image detail. You can preview clipped areas as you adjust the tone sliders in the Basic panel.

Clipping indicators  are located at the top of the Histogram panel in the Develop module. The black (shadow) clipping indicator is on the left, and the white (highlight) indicator is on the right.

  • Move the Blacks slider and watch the black clipping indicator. Move the Recovery or Whites sliders and watch the white clipping indicator. An indicator turns white when clipping in all channels occurs. A colored clipping indicator means one or two channels are clipped.
  • To preview clipping in the photo, move the mouse over the clipping indicator. Click the indicator to keep the preview on.

    Clipped black areas in the photo become blue, and clipped white areas become red.

  • To view clipped image ares for each channel, press Alt (Windows) or Option (Mac OS) while moving a slider in the Basic panel of the Develop module.

    For the Recovery and Whites sliders, the image turns black, and clipped areas appear white. For the Blacks slider, the image turns white and clipped areas appear black. Colored areas indicate clipping in one color channel (red, green, blue) or two color channels (cyan, magenta, yellow).

Set overall color saturation

In the Presence area of the Basic panel, change the color saturation (vividness or color purity) of all colors by adjusting the Clarity, Vibrance, and Saturation controls. (To adjust saturation for a specific range of colors, use the controls in the HSL/Color/Grayscale panel.)

Clarity

Adds depth to an image by increasing local contrast. When using this setting, it is best to zoom in to 100% or greater. To maximize the effect, increase the setting until you see halos near the edge details of the image, and then reduce the setting slightly.

Dehaze

Controls the amount of haze in a photograph. Drag to the right to remove haze; drag to the left to add haze.

ملاحظة:

Dehaze is also available as a local adjustment. While working with the Radial Filter, Graduated Filter, or the Adjustment Brush, adjust the Dehaze slider control. For more information, see Apply local adjustments and Use the Radial Filter tool.

Vibrance

Adjusts the saturation so that clipping is minimized as colors approach full saturation, changing the saturation of all lower-saturated colors with less effect on the higher-saturated colors. Vibrance also prevents skin tones from becoming over saturated.

Saturation

Adjusts the saturation of all image colors equally from ‐100 (monochrome) to +100 (double the saturation).

Video tutorial: Work with Clarity, Vibrance, and Saturation

Fine-tune the tonal scale using the Tone Curve panel

The graph in the Tone Curve panel of the Develop module represents changes made to the tonal scale of a photo. The horizontal axis represents the original tone values (input values), with black on the left and progressively lighter values toward the right. The vertical axis represents the changed tone values (output values), with black on the bottom and lighter values progressing to white at the top. Use the tone curve to tweak the adjustments you make to a photo in the Basic panel.

Lightroom Classic CC Develop module Tone Curve panel
Editing the Parametric Curve in the Tone Curve panel

Editing the Point Curve in the Tone Curve panel
Editing the Point Curve for Blue Channel in the Tone Curve panel

If a point on the curve moves up, it becomes a lighter tone; if it moves down, it becomes darker. A straight, 45-degree line indicates no changes to the tonal scale: The original input values exactly match the output values. You may see a tone curve that isn't straight when you first view a photo that you haven't adjusted. This initial curve reflects default adjustments that Lightroom Classic applied to your photo during import.

The Darks and Lights sliders affect mainly the middle region of the curve. The Highlight and Shadows sliders affect mainly the ends of the tonal range.

To make adjustments to the tone curve, do any of the following:

  • Click on the curve and drag up or down. As you drag, the affected region is highlighted and the related slider moves. The original and new tonal values are displayed in the upper-left of the tone curve.

  • Drag any of the four Region sliders left or right. As you drag, the curve moves within the affected region (Highlights, Lights, Darks, Shadows). The region is highlighted in the tone curve graph. To edit curve regions, drag the split controls at the bottom of the tone curve graph.

  • Click to select the Targeted Adjustment tool  in the upper-left of the Tone Curve panel and then click on an area in the photo that you want to adjust. Drag or press the Up and Down Arrow keys to lighten or darken the values for all similar tones in the photo.

  • Choose an option from the Point Curve menu: Linear, Medium Contrast, or Strong Contrast. The setting is reflected in the curve but not in the region sliders.

    Note: The Point Curve menu is blank for photos imported with metadata and previously edited with the Adobe Camera Raw tone curve.

To make adjustments to individual points on the tone curve, choose an option from the Point Curve menu, click the Edit Point Curve button , and do any of the following:

  • Choose an option from the Channel pop-up menu. You can edit all three channels at once, or choose to edit the Red, Green, or Blue channel individually.

  • Click to add a point.

  • Right-click (Windows) or Control-click (Mac OS) and choose Delete Control Point to remove a point.

  • Drag a point to edit it.

  • To return to a linear curve at any time, right-click (Windows) or Control-click (Mac OS) anywhere in the graph and choose Flatten Curve.

Video tutorial: Adjustments with the Tone Curve

Fine-tune image colors with HSL sliders

Use the HSL and Color panels in the Develop module to adjust individual color ranges in your photo. For example, if a red object looks too vivid and distracting, you can adjust it using the Saturation slider for Red. Note that all similar reds in the photo will be affected.

The adjustments you make in the HSL and Color panels produce similar results, but the two panels organize the sliders in different ways. To open a panel, click its name in the HSL/Color/B&W panel header.

The slides in these panels work on specific color ranges:

Hue

Hue adjusts the tone of each individual color and changes the color. For example, you can change a blue sky (and all other blue objects) from cyan to purple.

Saturation

Changes the color vividness or purity of the color. For instance, you can change a blue sky from gray to highly saturated blue.

Luminance

Changes the brightness of the color range.

Make adjustments in the HSL panel

  1. In the HSL panel, select Hue, Saturation, Luminance, or All to display the sliders you want to work with.
    • Drag the sliders or enter values in the text boxes to the right of the sliders.

    • Click the Targeted Adjustment tool  in the upper-left of the panel, move the pointer over an area in the photo that you want to adjust, and then click the mouse. Drag the pointer, or press the Up and Down Arrow keys to make the adjustment.

Make adjustments in the Color panel

  1. In the Color panel, click a color chip to display the range of colors you want to adjust.
  2. Drag the sliders or enter values in the text boxes to the right of the sliders.

Adjust the color calibration for your camera

ملاحظة:

Beginning with Lightroom Classic CC 7.3 (April 2018 release), the Profile option has been moved from the Calibration panel to the Basic panel at the top. For more information, see Apply a profile to your image.

  1. Select a photo, and then set options in the Calibration panel.

    Process

    The process version corresponds to the version of Camera Raw in which the profile first appeared. Choose an ACR profile if you want consistent behavior with legacy photos.

    Shadows

    Corrects for any green or magenta tint in the shadow areas of the photo.

    Red, Green, and Blue Primary

    The Hue and Saturation sliders adjust the red, green, and blue in the photo. In general, adjust the hue first, and then adjust its saturation. Moving the Hue slider to the left (negative value) is similar to a counterclockwise move on the color wheel; moving it to the right (positive value) is similar to a clockwise move. Moving the Saturation slider to the left (negative value) desaturates the color; moving it to the right (positive value) increases saturation.

  2. Save the adjustments as a Develop preset. See Create and apply Develop presets.

    You can apply this preset to other photos taken with the same camera, under similar lighting conditions.

You can also customize camera profiles using the standalone DNG Profile Editor utility. The free DNG Profile Editor and documentation for it are available for download at DNG Profiles - Adobe Labs.

ملاحظة:

Leave the Camera Calibration panel sliders set to 0 when adjusting camera profiles with the DNG Profile Editor.

Save default settings for cameras

You can save new camera raw defaults for each camera model. Change preference options to determine whether the camera serial number and ISO settings are included in the defaults.

  1. Open Presets preferences, and then select whether you want the camera serial number and the camera ISO setting to be included in the defaults.
  2. In Develop module, select a raw file, change settings, and choose Develop > Set Default Settings.
  3. Choose Update To Current Settings.

In Presets preferences, you can choose Reset Default Develop Settings to revert to the original settings.

Work in grayscale

Convert a photo to gray tones

Black & White Mix in the B&W panel converts color images to monochrome grayscale images, providing control over how individual colors convert to gray tones.

  1. Convert the photo to grayscale by selecting Black & White in the Treatment area of the Basic panel or by pressing V.
  2. Adjust the photo's tonal range using the settings in the Basic and Tone Curve panels.
  3. In the HSL/Color/B&W panel, darken or lighten the gray tones that represent colors in the original photo.
    • Drag the individual color sliders to adjust the gray tone for all similar colors in the original photo.

    • Click Auto to set a grayscale mix that maximizes the distribution of gray tones. Auto often produces excellent results that can be used as a starting point for tweaking gray tones using the sliders.

    • Click the Targeted Adjustment tool  in the upper-left of the B&W panel, move the pointer over an area of the photo you want to adjust, and click the mouse. Drag the tool, or press the Up and Down Arrow keys, to lighten or darken the grays for all similarly colored areas of the original photo.

ملاحظة:

To apply grayscale mix automatically when converting photos to grayscale, select the Apply Auto Mix When First Converting To Black And White in the Presets area of the Preferences dialog box.

Tone a grayscale photo

Use the color wheels in the Color Grading panel to color a grayscale photo. You can add one color throughout the tonal range, such as a sepia effect, or create a split tone effect in which a different color is applied to the shadows and the highlights. The extreme shadows and highlights remain black and white.

You can also apply special effects, such as a cross-processed look, to a color photo.

  1. Open a grayscale photo in the Develop module.

  2. Select Color Grading from the panel on the right.

  3. In the Color Grading panel of the Develop module, adjust the Hue and Saturation for the Highlights, Midtones, and Shadows. Hue sets the color of the tone; Saturation sets the strength of the effect.

    Color Grading

  4. Adjust the Blending slider to set the amount of overlap between shadows and highlights. Drag the slider towards the right to maximize the overlap and drag it left to minimize the overlap.

  5. Set the Balance slider to balance the effects of highlights, midtones, and shadows. Values greater than 0 will increase the effect of the highlights, values less than 0 will increase the effect of the shadows.

Press the following keys while dragging on the color wheel to get into different modes:

  • Alt (Windows)/Option (macOS): Fine Adjust mode. It gives more control to fine tune Saturation and Hue.
  • Shift: Saturation only mode.
  • Ctrl (Windows)/Command (macOS): Hue only mode.

You can also adjust the Hue and Saturation by using the following keyboard shortcuts while hovering over the color wheels.

Keyboard shortcut

Outcome

Option/Alt + Up

Increase Saturation by 1

Option/Alt + Down

Decrease Saturation by 1

Option/Alt + Shift + Up

Increase Saturation by 10

Option/Alt + Shift + Down

Decrease Saturation by 10

Option/Alt + Left

Increase Hue by 1

Option/Alt + Right

Decrease Hue by 1

Option/Alt + Shift + Left

Increase Hue by 10

Option/Alt + Shift + Right

Decrease Hue by 10

Work with single-channel grayscale images

Grayscale mode images from Photoshop have no color data, but you can make tonal adjustments to them in Lightroom Classic using the tone adjustments in the Basic panel or Tone Curve panel. You can also apply color toning effects using the options in the Color Grading panel. Lightroom Classic handles the photo as an RGB image and exports it as RGB.

Video tutorial: Work with B&W adjustments

 Adobe

احصل على مساعدة بشكل أسرع وأسهل

مستخدم جديد؟