To open the Audio Meters panel, select Window > Audio Meters.
Adjusting volume levels
- Adobe Premiere Pro User Guide
- Beta releases
- Getting started
- Hardware and operating system requirements
- Creating projects
- Workspaces and workflows
- Import media
- Importing from Avid or Final Cut
- File formats
- Working with timecode
- Edit video
- Create and change sequences
- Set In and Out points in the Source Monitor
- Add clips to sequences
- Rearrange and move clips
- Find, select, and group clips in a sequence
- Remove clips from a sequence
- Change sequence settings
- Edit from sequences loaded into the Source Monitor
- Simplify sequences
- Rendering and previewing sequences
- Working with markers
- Source patching and track targeting
- Scene edit detection
- Cut and trim clips
- Overview of audio in Premiere Pro
- Edit audio clips in the Source Monitor
- Audio Auto-Tagging
- Audio Track Mixer
- Adjusting volume levels
- Edit, repair, and improve audio using Essential Sound panel
- Automatically duck audio
- Remix audio
- Monitor clip volume and pan using Audio Clip Mixer
- Audio balancing and panning
- Advanced Audio - Submixes, downmixing, and routing
- Audio effects and transitions
- Working with audio transitions
- Apply effects to audio
- Measure audio using the Loudness Radar effect
- Recording audio mixes
- Editing audio in the timeline
- Audio channel mapping in Premiere Pro
- Use Adobe Stock audio in Premiere Pro
- Overview of audio in Premiere Pro
- Text-Based Editing
- Advanced editing
- Best Practices
- Video Effects and Transitions
- Overview of video effects and transitions
- Titles, Graphics, and Captions
- Overview of the Essential Graphics panel
- Create a shape
- Draw with the Pen tool
- Align and distribute objects
- Change the appearance of text and shapes
- Apply gradients
- Add Responsive Design features to your graphics
- Install and use Motion Graphics templates
- Replace images or videos in Motion Graphics templates
- Use data-driven Motion Graphics templates
- Best Practices: Faster graphics workflows
- Retiring the Legacy Titler FAQs
- Upgrade Legacy titles to Source Graphics
- Animation and Keyframing
- Color Correction and Grading
- Overview: Color workflows in Premiere Pro
- Color Settings
- Auto Color
- Get creative with color using Lumetri looks
- Adjust color using RGB and Hue Saturation Curves
- Correct and match colors between shots
- Using HSL Secondary controls in the Lumetri Color panel
- Create vignettes
- Looks and LUTs
- Lumetri scopes
- Display Color Management
- Timeline tone mapping
- HDR for broadcasters
- Enable DirectX HDR support
- Exporting media
- Export video
- Export Preset Manager
- Workflow and overview for exporting
- Quick export
- Exporting for the Web and mobile devices
- Export a still image
- Exporting projects for other applications
- Exporting OMF files for Pro Tools
- Export to Panasonic P2 format
- Export settings
- Best Practices: Export faster
- Collaborative editing
- Collaboration in Premiere Pro
- Get started with collaborative video editing
- Create Team Projects
- Add and manage media in Team Projects
- Invite and manage collaborators
- Share and manage changes with collaborators
- View auto saves and versions of Team Projects
- Manage Team Projects
- Linked Team Projects
- Frequently asked questions
- Long form and Episodic workflows
- Working with other Adobe applications
- Organizing and Managing Assets
- Working in the Project panel
- Organize assets in the Project panel
- Playing assets
- Search assets
- Creative Cloud Libraries
- Sync Settings in Premiere Pro
- Consolidate, transcode, and archive projects
- Managing metadata
- Best Practices
- Working in the Project panel
- Improving Performance and Troubleshooting
- Set preferences
- Reset and restore preferences
- Recovery Mode
- Working with Proxies
- Check if your system is compatible with Premiere Pro
- Premiere Pro for Apple silicon
- Eliminate flicker
- Interlacing and field order
- Smart rendering
- Control surface support
- Best Practices: Working with native formats
- Knowledge Base
- Known issues
- Fixed issues
- Fix Premiere Pro crash issues
- Unable to migrate settings after updating Premiere Pro
- Green and pink video in Premiere Pro or Premiere Rush
- How do I manage the Media Cache in Premiere Pro?
- Fix errors when rendering or exporting
- Troubleshoot issues related to playback and performance in Premiere Pro
- Extensions and plugins
- Video and audio streaming
- Monitoring Assets and Offline Media
Learn to monitor, adjust, and normalize audio in Premiere Pro. Learn to adjust track volume over time using keyframes.
Monitor volume level while capturing
You can monitor audio levels for clips while capturing DV or HDV footage.
You can monitor audio levels while capturing DV or HDV footage.
Capture video from a DV or HDV source.
The Audio Meters panel displays the audio level for the captured footage. For more information, see Capturing and digitizing footage.
Monitor volume level from Timeline or Program Monitor
You can monitor audio levels for clips in the Timeline panel.
To open the Audio Meters Panel, select Window > Audio Meters.
Select the clip in the Program Monitor or the Timeline panel.
Do one of the following to play the clip:
- Press the spacebar
- In the Program Monitor, click the Play Stop Toggle button
The Audio Meters panel displays the audio level for the captured footage.
Remove audio while scrubbing
By default, Premiere Pro plays audio while scrubbing any clip or sequence containing audio in the Source Monitor, Program Monitor, or the Timeline panel. You can remove audio scrubbing by doing the following:
Select Edit > Preferences > Audio (Windows), or Premiere Pro > Preferences > Audio (macOS).
You can assign a keyboard shortcut to the Preferences > Audio command. For more information, see Find keyboard shortcuts.
Deselect Play audio while scrubbing.
Adjust gain and volume
Gain refers to the input level or volume in clips. You use the Audio Gain command to adjust the gain level for one or more selected clips. The Audio Gain command is independent of the output level settings in the Audio Track Mixer and Timeline panels. Its value is combined with the track level for the final mix. You can adjust the gain for an entire sequence with the Normalize Mix Track (previously known as Normalize Master Track) command.
Volume refers to the output level or the volume in sequence clips or tracks. You can adjust the volume for a sequence clip in the Effect Controls or Timeline panels. In the Effect Controls panel, you use the same methods to adjust the volume that you use to set other effect options. It’s often simpler to adjust the Volume effect in the Timeline panel.
You can set gain or volume levels to make levels consistent among tracks, or to change the volume of a track. However, if the level of an audio clip was set too low when it was digitized, increasing the gain or volume amplifies noise. For best results, follow the standard practice of recording or digitizing source audio at the optimum level. This practice allows you to concentrate on adjusting track levels.
Normalize one or more clips
Do one of the following:
- Select the source clip (previously known as master clip) in the Project panel. You can adjust the gain of a source clip so that all instances of the clip added to the Timeline panel have the same gain level.
- Select the clip in the Timeline panel. You can adjust the gain of just one instance of a source clip already in a sequence.
- In a sequence, Shift-click the clips to select them. To adjust the gain of more than one source clip or clip instance, select the clips in a Project panel or sequence. In a Project panel, Shift-click to select contiguous clips. To select non-contiguous clips, click Ctrl-click (Windows) or Command-click (Mac OS).
Choose Clip > Audio Options > Audio Gain or keyboard shortcut G.
The Audio Gain dialog box opens. Premiere Pro automatically calculates the peak amplitude of the selected clips. This value is displayed in the Peak Amplitude field. Once calculated, this value is stored for the selection. You can use this value as a guide to adjust gain.
Select one of the following, set its value:
Set Gain to
The default value is 0.0 dB. This option allows the user to set gain to a specific value. This value is always updated to the current gain, even when the option is not selected, and the value appears dimmed.
Adjust Gain by
The default value is 0.0 dB. This option allows the user to adjust gain by + or - dB. Entering a value other than zero in this field automatically updates the Set Gain To dB value to reflect the actual gain value applied to the clip.
Normalize Max Peak to
The default value is 0.0 dB. Users can set this value to any value below 0.0 dB. It option adjusts the maximum peak amplitude in the selected clips to the user-specified value.
How to normalize all peaks in Premiere Pro
Normalize All Peaks to
The default value is 0.0 dB. Users can set this value to anything below 0.0 dB. This normalization option adjusts the peak amplitude in the selected clips to the user-specified value.
Normalize the Mix track
You can set the peak volume level for the Mix track of a sequence. Premiere Pro automatically adjusts the fader for the whole Mix track. The loudest sound in the track achieves the specified value. Premiere Pro scales any keyframes on the Mix track upward or downward, in proportion to the adjustment made in overall volume.
Adobe Premiere Pro does not allow a volume adjustment that would raise the peak higher than 0 dB.
Select the sequence you want to normalize.
Select Sequence > Normalize Mix Track.
In the Normalize Track dialog box, type an amplitude value in the dB field.
Adjust track volume with keyframes
You can add keyframes in the Timeline or the Effect Controls panel at the current time. Keyframes allow you to manipulate the volume of a clip.
Adjust track volume on the timeline panel
You can adjust the volume level of a track or have the volume change over time using the rubber band in an audio track of a Timeline panel.
Expand the audio track by double clicking on it.
In the audio track header, click the Show Keyframes button, and choose one of the following from the menu:
- Clip Keyframes: You can animate audio effects for a clip, including Volume Level. These keyframes only apply to the selected clip.
- Track Keyframes: You can animate audio track effects like Volume and Mute. These keyframes apply to the entire track.
- Track Panner: You can change a track’s volume level. For more information, see Panning and balancing.
Create keyframes by using Ctrl-click (Windows) or Command-click (Mac OS). You can also create keyframes using the Pen tool.
Use either the Selection tool or the Pen tool to move the Volume level rubber band up (increase volume) or down (decrease volume).Opmerking:
If you want the Volume effect to change over time, place the current-time indicator at the location for each change, click the Add/Remove Keyframe button in the audio track header, and drag the keyframe up (louder) or down (quieter).
Apply a volume level to several clips
To apply the same effect to multiple clips, do the following:
In the Timeline panel, adjust the volume of a single clip to the desired level.
Choose Edit > Copy.
Drag a marquee over the other clips you want to change. You can also use Shift-click to select multiple clips.
Choose Edit > Paste Attributes.
Choose the fields and click OK.
This procedure pastes all effects and attributes of the first clip selected, not just its volume settings.
Adjust volume in Effect Controls
To adjust the volume of a single clip in the Effect Controls panel, do the following:
Select an audio clip in a sequence.
Click the triangle next to Volume in the Effect Controls panel to expand the effect.
Do one of the following:
- Enter a value for the Level. A negative value decreases the volume level and a positive value increases the volume level. A value of 0.0 represents the original clip’s volume level without adjustment.
- Click the triangle next to Level to expand the effect options. Use the slider to adjust the volume level.
A keyframe is automatically created at the position of the current-time indicator in the Effect Controls panel.
(Optional) To change the Volume effect over time, move the current-time indicator and adjust the volume level graph in the Effect Controls panel.
Each time you move the current-time indicator and make an adjustment, a new keyframe is created. You can also adjust the interpolation between keyframes by editing the keyframe graph. Repeat as needed.