Select any combination of properties (for example, Position and Scale) and property groups (for example, Paint and Transform). If you are selecting only effects, you can select them in the Effect Controls panel.
With animation presets, you can save and reuse specific configurations of layer properties and animations, including keyframes, effects, and expressions. For example, if you created an explosion using several effects with complex property settings, keyframes, and expressions, you can save all those settings as a single animation preset. You can then apply that animation preset to any other layer.
Many animation presets don’t contain animation; rather, they contain combinations of effects, transform properties, and so on. A behavior animation preset uses expressions instead of keyframes to animate layer properties.
Animation presets can be saved and transferred from one computer to another. The filename extension for an animation preset is .ffx.
After Effects includes hundreds of animation presets that you can apply to your layers and modify to suit your needs, including many text animation presets. (See Text animation presets.)
You can browse and apply animation presets in After Effects using the Effects & Presets panel or Adobe Bridge. To open the Presets folder in Adobe Bridge, choose Browse Presets from the Effects & Presets panel menu or from the Animation menu.
A great way to see how advanced users use After Effects is to apply an animation preset, and press U or UU to reveal only the animated or modified layer properties. Viewing the animated and modified properties shows you what changes the designer of the animation preset made to create the animation preset.
The animation presets installed with After Effects are in the Presets folder.
By default, Animation presets that you create are saved in the Presets folder.
You can add a single new animation preset or an entire folder of new animation presets to either of the Presets folders.
When After Effects starts, it searches both Presets folders, and their subfolders for installed animation presets and adds them to the Effects & Presets panel. After Effects ignores the contents of folders with names that begin and end in parentheses; for example, the contents of the folder (archived_animation_presets) are not loaded.
Animation presets appear in the Effects & Presets panel only if they are located in one of the Presets folders or a subfolder of one of the Presets folders. If you move a preset to a new folder, place a shortcut (Windows) or an alias (macOS) of that folder in the Presets folder.
Animation presets are loaded and initialized only when the Effects & Presets panel is shown. If the Effects & Presets panel is closed or hidden behind another panel, the animation presets are not initialized.
Select any combination of properties (for example, Position and Scale) and property groups (for example, Paint and Transform). If you are selecting only effects, you can select them in the Effect Controls panel.
Choose Save Animation Preset from the Animation menu or from the Effects & Presets panel menu.
Specify a name and location for the file, and then click Save.
For the animation preset to appear in the Effects & Presets panel, it must be saved in the Presets folder.
If the animation preset does not appear in the Effects & Presets panel, choose Refresh List from the Effects & Presets panel menu.
If you apply an animation preset from the Animation Presets > Shapes > Backgrounds category, you can see a custom Animated Shape Control effect in the Effect Controls panel. This custom effect is a specialized expression control effect that was created specifically for these animation presets. You can copy and paste this effect to other layers, or you can save it as an animation preset itself so that you can apply it elsewhere.
After Effects includes various effects, which you apply to layers to add or modify characteristics of still images, video, and audio. For example, an effect can alter the exposure or color of an image, add new visual elements, manipulate sound, distort images, remove grain, enhance lighting, or create a transition.
Effects are sometimes mistakenly referred to as filters. The primary difference between a filter and an effect is that a filter permanently modifies an image or other characteristic of a layer, whereas an effect and its properties can be changed or removed at any time. In other words, filters operate destructively, and effects operate non-destructively. After Effects uses effects exclusively, so changes are non-destructive. A direct result of the ability to change the properties of effects is that the properties can be changed over time, or animated.
Path operations on shape layers, such as Zig Zag and Pucker & Bloat—which you apply through the shape layer’s Add menu—are called effects in Adobe Illustrator, but they function differently from other effects in After Effects.
You browse and apply effects using the Effects & Presets panel. You modify effect properties using the Effect Controls panel or Timeline panel or by moving effect control points in the Layer panel or Composition panel.
You can apply multiple instances of the same effect to a layer, rename each instance, and set the properties for each instance separately.
If you open a project that uses an effect for which After Effects has not loaded the plug-in, a warning dialog box appears, and instances of the effect have Missing: at the beginning of its name in the Timeline panel and Effect Controls panel. To show all instances of missing effects in the Timeline panel for the active composition, press FF.
All effects are implemented as plug-ins, including the effects that are included with After Effects. Plug-ins are small software modules—with filename extensions such as .aex, .pbk, and .pbg—that add functionality to an application. Not all plug-ins are effect plug-ins; for example, some plug-ins provide features for importing and working with certain file formats. The Photoshop Camera Raw plug-in, for example, provides After Effects with its ability to work with camera raw files. (See Plug-ins.)
Because effects are implemented as plug-ins, you can install and use additional effects that parties other than Adobe provide, including effects that you create yourself. You can add a single new effect or an entire folder of new effects to the Plug-ins folder, which is located by default in one of these folders:
Windows: Program Files\Adobe\Adobe After Effects\Support Files
macOS: Applications/Adobe After Effects
When After Effects starts, it searches the Plug-ins folder and its subfolders for all installed effects and adds them to the Effect menu and to the Effects & Presets panel. After Effects ignores the contents of folders with names that begin and end in parentheses; for example, the contents of the folder (archived_effects) are not loaded.
After Effects comes with several third-party plug-ins, including Foundry Keylight, Synthetic Aperture Color Finesse, Imagineer mocha shape, fnord ProEXR, and CycoreFX HD plug-ins. These plug-ins are installed by default with the full version of Adobe After Effects software. (See Third-party plug-ins included with After Effects.).
The installers for some plug-ins install their documentation in the same directory as the plug-ins themselves.
The EXtractoR and IDentifier plug-ins from fnord software are included with After Effects to provide access to multiple layers and channels of OpenEXR files. See ProEXR plug-ins, IDentifier, and EXtractoR.
You animate effect properties in the same way that you animate any other properties—by adding keyframes or expressions to them. Usually, even effects that rely on animation for their normal use require that you set some keyframes or expressions. For example, animate the Transition Completion property of a Transition effect or the Evolution setting of the Turbulent Noise effect to turn a static effect into a dynamic effect.
Many effects support processing of image color and alpha channel data at a depth of 16 bits or 32 bits per channel (bpc). Using an 8-bpc effect in a 16-bpc or 32-bpc project can result in a loss of color detail. If an effect supports only 8 bpc, and your project is set to 16 bpc or 32 bpc, the Effect Controls panel displays a warning icon next to the effect name. You can set the Effects & Presets panel to list only the effects that support the color depth of the current project. (See Color depth and high dynamic range color.)
The property group of each effect includes a Compositing Options property group. There is a new Effect Opacity property that provides similar functionality to every effect as the Blend With Original controls. With the Effect Opacity property, you can change the global opacity and it affects the entire effect. There is no need to add a mask separately.
The Blend With Original controls group lets you precisely apply any effect to a particular area of an image by masking the desired area.
For more information, see the Blend With Original effect section.
The order in which After Effects renders masks, effects, layer styles, and transform properties—called the render order—may affect the final result of an applied effect. By default, effects appear in the Timeline panel and Effect Controls panel in the order in which they were applied. Effects are rendered in order from top to bottom in this list. To change the order in which effects are rendered, drag the effect name to a new position in the list. (See Render order and collapsing transformations.)
An effect applied to an adjustment layer affects all layers below it in the layer stacking order in the Timeline panel. (See Create an adjustment layer.)
Expression Controls effects do not modify existing layer properties; rather, these effects add layer properties that expressions can refer to. See Editing expressions.
Because an effect is applied to a layer, the results of some effects are constrained within the bounds of the layer, which can make the effect appear to end abruptly. You can apply the Grow Bounds effect to a layer to temporarily extend the layer for calculating the results of other effects. This process is not necessary for newer effects, which tend to be 32-BPC effects.
Some effects—including the Puppet effect, the Paint effect, and the Roto Brush effect—are applied to a layer with a tool, rather than being applied directly in the same manner as other effects. (See Animating with Puppet tools, Paint tools and paint strokes, and Transparency, opacity, and compositing.)
CycoreFX HD is included in the installation of After Effects and CS6. There is 16-BPC support in all effects and 32-BPC (float) support in 35 effects. CycoreFX HD plug-ins support motion blur, lights, more controls, and options.
Documentation, including tutorials and example projects for the Cycore FX plug-ins, is available on the Cycore website.
Several effects rely on a control layer (or layer map) as input. These compound effects use the pixel values of the control layer to determine how to affect the pixels of the layer that the effect is applied to (the destination layer). Sometimes, the effect uses the brightness values of the pixels in the control layer; in some cases, the effect uses the individual channel values of the pixels in the control layer.
For example, the Displacement Map effect uses the brightness values of a control layer to determine how far to shift pixels of the underlying layer, and in which direction. The Shatter effect can use two control layers—one to customize the shapes of the shattered pieces and one to control when specific parts of the destination layer explode.
The compound effect ignores effects, masks, and transformations of a control layer. To use the results of effects, masks, and transformations on a layer, precompose the layer and use the precomposition layer as the control layer.
It is common to use a control layer that is not itself visible—that is, its Video switch is off.
Most compound effects include a Stretch Map To Fit option (or a similarly named option), which temporarily stretches or shrinks a control layer to the dimensions of the destination layer. This provides a pixel in the control layer corresponding to each pixel in the destination layer. If you deselect this option, the calculations for the compound effect are performed as if the control layer is centered on the destination layer at its original size.
You can create control layers by drawing or painting in an image-editing program, such as Adobe Photoshop.
Tips for creating control layers:
For many compound effects, neutral gray pixels in the control layer correspond to null operations. Therefore, a neutral gray solid layer is a good starting point for creating a control layer.
Apply the Turbulent Noise effect to a layer and precompose it to create a good control layer for turbulent or atmospheric results.
You can create a control layer by precomposing a white solid layer, a black solid layer, and a mask on the top layer that determines which areas are white and black. Increasing the feather of a mask softens the transition between black and white values.
The contrast between adjacent pixel values determines how smoothly the values change across the surface of the control layer. To create smooth changes, paint using a soft or anti-aliased brush, or apply gradients. To create abrupt changes, avoid intermediate shades, using a few widely spaced shades, such as 50% gray, black, and white.
Some effects can use the camera and lights within the same composition. These effects include Card Dance, Card Wipe, and Shatter. Some of these effects always use the composition camera, whereas others include light and camera options in the Effect Controls panel.
The Live Photoshop 3D effect behaves as an effect with a Comp Camera attribute. This effect only appears on a layer when the layer is a 3D object layer from a PSD file. See 3D object layers from Photoshop.
When you apply an effect with a Comp Camera attribute to a 2D layer, the effect can track the camera, and light positions within the composition and render a 3D image on the 2D layer that it is applied to. The results of the effect appear to be three-dimensional; however, the layer with the Comp Camera attribute applied remains a 2D layer and therefore has the following characteristics:
3D layers above and below it in the Timeline panel cannot intersect with each other or cast shadows on each other.
It cannot intersect with 3D layers or cast or accept shadows.
The image is rendered on the layer, not the composition, so make sure that you apply these effects to layers that are the same size as the composition and are exactly centered in the composition.
When you apply an effect to a layer, the Effect Controls panel opens, listing the effect you applied and controls to change the property values for the effect. You can also work with effects and change most effect property values in the Timeline panel. However, the Effect Controls panel has more convenient controls for many kinds of properties, such as sliders, effect control point buttons, and histograms.
The Effect Controls panel is a viewer, which means that you can have Effect Controls panels for multiple layers open at once and can use the viewer menu in the tab of the panel to select layers.
Browse and apply effects and animation presets with the Effects & Presets panel. An icon identifies each item in the panel by type. Numbers within the icons for effects indicate whether the effect works on a maximum of 8 bits, 16 bits, or 32 bits per channel.
You can scroll through the list of effects and animation presets, or you can search for effects and animation presets by typing any part of the name in the search box at the top of the panel.
The options that you choose in the Effects & Presets panel menu determine which items are shown:
Show Effects For All Color Depths
Shows effects that work with any color depth, not only the effects that work with the depth of the current project.
Shows all available effects.
Show Animation Presets
Shows all animation presets, including animation presets saved by you in the Presets folder.
The panel organizes effects and animation presets according to the option that you select from the panel menu: Categories, Explorer Folders (Windows) or Finder Folders (macOS), or Alphabetical.
Use the following commands in the panel menu to manage your effects and animation presets:
Reveal In Explorer (Windows) or Reveal In Finder (macOS)
Opens the folder that contains the effect or animation preset selected in the Effects & Presets panel.
Updates the list of effects and animation presets.
When you drag an effect or animation preset onto a layer in the Composition panel, the name of the layer under the pointer is shown in the Info panel. If you have not selected a layer, double-clicking an animation preset creates a new layer and applies the preset to the layer. Double-clicking an effect when no layer is selected does nothing.
Applying an effect or animation preset to a layer selects the layer.
By default, when you apply an effect to a layer, the effect is active for the duration of the layer. However, you can make an effect start and stop at specific times or make the effect more or less intense over time by using keyframes or expressions or by applying the effect to an adjustment layer.
Animation presets are applied at the current time.
To see what changes have been made by applying an animation preset to a layer, select the layer and press UU to show modified properties or press U to show properties with keyframes or expressions.
After you’ve applied effects to a layer, you can temporarily disable one, or all the effects on the layer so that you can concentrate on another aspect of your composition. Effects that are disabled are not rendered, either for previews or for final output. However, in the Render Queue panel, you can specify that the composition is rendered for final output with all effects on, regardless of which effects are rendered for previews in the Composition panel. Disabling an effect does not delete the keyframes created for any of the effect properties; all keyframes remain until the effect is deleted from the layer.
You can’t disable an animation preset or delete it from a layer as a unit. You can individually delete or disable the effects, keyframes, and expressions that it comprises.
This command eliminates all keyframes for the deleted effects. If you choose Remove All accidentally, immediately choose Edit > Undo Delete Effect, or Edit > Undo Remove All Effects to restore the effects and keyframes.
You can remove an effect or animation preset from the folder in which After Effects searches for these items, preventing it from being loaded and from being shown in the Effects & Presets panel or Effect menu.
Select the effect or animation preset in the Effects & Presets panel.
Choose Reveal In Explorer (Windows) or Reveal In Finder (macOS) from the panel menu.
Move the effect (.aex) or animation preset (.ffx) file out of the Plug-ins or Presets folder.
Choose Refresh List from the Effects & Presets panel menu to update the list of animation presets in the panel.
The list of effects is only updated when the application starts.
Rather than removing effects or animation presets entirely, consider creating a subfolder in the Plug-ins or Presets folder for effects or animation presets that you seldom use. After Effects ignores the contents of folders with names that begin and end with parentheses, such as (archive_folder).
Some effects have effect control points, which determine how the effect affects the layer. For example, the Advanced Lightning effect has two effect control points—Origin and Direction—which specify where the lightning begins and in which direction it points.
Effect control points are in layer space for layers that are not continuously rasterized and for which transformations are not collapsed. If a layer is continuously rasterized or has collapsed transformations, then effect control points are in composition space. (See Coordinate systems: composition space and layer space and Render order and collapsing transformations.)
Vector layers (including shape layers and text layers) are always continuously rasterized, so their effect control points are always in composition space. (See Continuously rasterize a layer containing vector graphics.)
Null object layers, solid-color layers, and other layers based on source footage items by default have effect control points in layer space.
To view effect control points in the Composition panel, select Show Layer Controls in the View menu and select Effect Controls in View Options (View > View Options).
Because true randomness is not repeatable, many effects simulate randomness by using a calculation that generates seemingly random results for each value of a Random Seed property. Multiple instances of the same effect give the same results if all their settings—including the Random Seed property values—are the same. This allows you to get predictable, deterministic results, while still achieving the appearance of randomness.
Changing the Random Seed value doesn’t make things more or less random; it only makes them seem random in a different way.
You can add randomness to any property with the expressions in the Random Numbers category.
Effects in Adobe After Effects contain compositing options that make it easy to blend any effect with the original clip and modify only a portion of a clip, without additional adjustment layers or track matte layers.
For more information, see Compositing options and Mask Reference.
A variety of animation presets are bundled with the product and are located in the Support Files/Presets folder.
For information about using, browsing, and previewing animation presets, see Animation presets overview and resources.
Separate XYZ Position
Create incredible motion graphics, text animation, and visual effects with Adobe After Effects. Design for film, TV, video, and web.