Adobe Fresco を起動し使用するためには、お使いのデバイスが以下の必要システム構成を満たしている必要があります。

Applicable for:

October 2020 release (versions 2.0)

Fresco is a drawing and painting app built specifically for touch first and stylus powered platforms like the Apple iPad with Pencil, Wacom Mobile Studio Pro, and select Microsoft Surface devices with Surface Pen. 

Supported devices

Want to find out which iPad model you have? Read this Apples' Support page to identify your iPad model. You can also look for the model number of your iPad at the back of the device or go to Settings General About screen in Fresco app. 

iPad

  Minimum requirement
iPad
Require one of the following devices: 
  • iPad Pro (all models)
  • iPad Air (3rd generation)
  • iPad (5ᵗʰ, 6ᵗʰ, 7ᵗʰ, and 8ᵗʰ generation)
  • iPad mini (5ᵗʰ generation)
Operating system
iOS version 13 or later
Hard disk space
3GB required to install and run. 16GB available storage recommended for best performance.
Internet
Internet connection and registration are necessary for required software activation, validation of subscriptions, and access to online services.
Stylus
Apple Pencil, Apple Pencil (2nd Generation)

iPhone

  Minimum requirement
Devices
Any of the following devices: 
  • iPhone 11 Pro
  • iPhone 11 Pro Max
  • iPhone 11
  • iPhone XS
  • iPhone XS Max
  • iPhone XR
  • iPhone X
  • Phone 8
  • iPhone 8 Plus
  • iPhone 7
  • iPhone 7 Plus
  • iPhone 6s
  • iPhone 6s Plus
  • iPhone SE
  • iPhone SE (2020)
Operating system
iOS version 13 or later
Hard disk space
3GB required to install and run. 16GB available storage recommended for best performance.
Internet
Internet connection and registration are necessary for required software activation, validation of subscriptions, and access to online services.

  Minimum requirement
Operating system Windows 10 version 1903 or later
Graphics Processor

Intel, Nvidia or AMD * GPU with Direct X Feature Level 12.1

Graphics driver Latest graphics driver is required on Windows 10
RAM 8GB 
Hard disk space 5GB of available disk space for installation
Internet Internet connection and registration are necessary for required software activation, validation of subscriptions, and access to online services
  Highly recommended
Peripheral input devices  As a drawing and painting app, Fresco has been optimized for use with a stylus. We recommend using pressure sensitive tablets and styluses (such as Wacom tablets or Surface pen). 

* AMD GPU driver Radeon Software Adrenalin 2020 Edition 20.7.1, Driver Version 20.20.01.08 (Windows Driver Store Version 27.20.2001.8002) and newer is required. Visit https://www.amd.com/en/support to download.

Install latest graphics driver

To use live brushes in Fresco on Windows, you need the latest graphics driver installed on your device. Fresco detects the compatibility of your device graphics driver and alerts you to install the latest version of the driver. 

  1. Download the Windows 10 graphics driver from Download Center.
  2. Double-click the <driverfilename>.exe to install the driver. Follow the on-screen instructions and restart the device after installation is complete. 

Verify the installation: 

  1. Right-click the Windows start icon and click the Device Manager
  2. In Display adapter section, right-click the Intel graphics name and click the Driver tab. 

Check whether the driver version and driver date are as shown in the Download Center. 

Enable hybrid graphics mode on HP ZBook x2 G4

To successfully install Fresco on the HP ZBook x2 G4, hybrid graphics mode must be enabled. Hybrid graphics mode is not enabled by default on this device. After enabling hybrid graphics mode, reboot your device and run the Fresco installer again.

Steps to enable the hybrid graphics mode:

  1. Shut down the device and turn on the device, repeatedly press the Esc key on keyboard to enter the Startup Menu.  
  2. From the Startup Menu, press the F10 key to enter the BIOS setup utility.
  3. Click Advanced > Device Configurations > Hybrid Graphics and then click Enable.
  4. Click Save and when prompted, click Save changes and exit BIOS.

Alternately, use the HP Performance Advisor:

  1. Install and launch the HP Performance advisor. 
  2. Click on Your Computer tab in the sidebar and click BIOS Settings.
  3. Scroll down and double-click on Advanced  and double-click on GFX. 
  4. Select Hybrid Graphics from the drop-down.
  5. Click OK on the dialog that appears asking to reboot to apply the changes.

Language versions available for Fresco

Fresco is available in the following languages: 

English 

French 

German 

Japanese 

Brazilian Portuguese 

Danish 

Dutch 

Finnish 

Italian

Norwegian 

Spanish 

Swedish 

Korean 

Simplified Chinese 

Traditional Chinese 

Czech 

Polish 

Russian 

Turkish