คู่มือผู้ใช้ ยกเลิก

Create data-driven graphics

  1. คู่มือผู้ใช้ Photoshop
  2. บทนำสู่ Photoshop
    1. จงฝัน แล้วลงมือ
    2. มีอะไรใหม่ใน Photoshop
    3. แก้ไขภาพแรกของคุณ
    4. สร้างเอกสาร
    5. Photoshop | คำถามทั่วไป
    6. ความต้องการของระบบสำหรับ Photoshop
    7. ทำความรู้จัก Photoshop
    8. อัปเดต Photoshop ให้เป็นเวอร์ชันล่าสุดเสมอ
  3. Photoshop และผลิตภัณฑ์และบริการอื่นๆ ของ Adobe
    1. ทำงานกับงานศิลปะของ Illustrator ใน Photoshop
    2. ทำงานกับไฟล์ Photoshop ใน InDesign
    3. วัสดุ Substance 3D สำหรับ Photoshop
    4. ใช้ส่วนขยาย Capture ในแอปใน Photoshop
  4. Photoshop บนมือถือ (ไม่พร้อมใช้งานในจีนแผ่นดินใหญ่)
    1. คู่มือผู้ใช้
    2. มีอะไรใหม่ 
    3. ข้อกำหนดด้านเทคนิค    
  5. Photoshop บน iPad (ไม่พร้อมใช้งานในจีนแผ่นดินใหญ่)
    1. Photoshop บน iPad | คำถามทั่วไป
    2. ทำความรู้จักกับพื้นที่ทำงาน
    3. ความต้องการของระบบ | Photoshop บน iPad
    4. สร้าง เปิด และส่งออกเอกสาร
    5. เพิ่มภาพถ่าย
    6. ทำงานกับเลเยอร์
    7. วาดและระบายด้วยแปรง
    8. เลือกและเพิ่มมาสก์
    9. รีทัชองค์ประกอบภาพของคุณ
    10. ทำงานกับเลเยอร์การปรับแต่ง
    11. ปรับโทนสีขององค์ประกอบภาพด้วยเคิร์ฟ
    12. ใช้การแปลง
    13. ครอบตัดและหมุนองค์ประกอบภาพ
    14. หมุน แพน ซูม และรีเซ็ตผ้าใบ
    15. ทำงานกับเลเยอร์ตัวอักษร
    16. ทำงานกับ Photoshop และ Lightroom
    17. รับแบบอักษรที่สูญหายใน Photoshop บน iPad
    18. ข้อความภาษาญี่ปุ่นใน Photoshop บน iPad
    19. จัดการการตั้งค่าแอป
    20. ทางลัดระบบสัมผัสและท่าทางการสัมผัส
    21. ทางลัดแป้นพิมพ์
    22. แก้ไขขนาดภาพ
    23. ไลฟ์สตรีมเมื่อคุณสร้างสรรค์ใน Photoshop บน iPad
    24. แก้ไขข้อบกพร่องด้วยแปรงแก้ไข
    25. สร้างแปรงใน Capture และใช้ใน Photoshop บน iPad
    26. ทำงานกับไฟล์ Camera Raw
    27. สร้างและทำงานกับ Smart Object
    28. ปรับค่าการรับแสงในภาพด้วยปรับความสว่างและปรับให้มืด
    29. คำสั่งการปรับแต่งอัตโนมัติใน Photoshop บน iPad
    30. ทำรอยเปื้อนในภาพด้วย Photoshop บน iPad
    31. เพิ่มหรือลดความเข้มของภาพของคุณโดยใช้เครื่องมือฟองน้ำ
    32. การเติมแบบรับรู้เนื้อหาสำหรับ iPad
  6. Photoshop บนเว็บ (ไม่พร้อมใช้งานในจีนแผ่นดินใหญ่)
    1. คู่มือผู้ใช้
    2. มีอะไรใหม่ใน Photoshop
    3. ข้อกำหนดด้านเทคนิค
  7. Photoshop (Beta) (ไม่พร้อมใช้งานในจีนแผ่นดินใหญ่)
    1. เริ่มต้นด้วยแอป Creative Cloud Beta
    2. Photoshop (Beta) บนเดสก์ท็อป
    3. รูปภาพอ้างอิง
    4. ผสมผสานวัตถุเข้ากับพื้นหลังได้ทุกแบบด้วยฟังก์ชันทำให้กลมกลืน
    5. เพิ่มคุณภาพของภาพด้วยฟังก์ชันเพิ่มความละเอียดภาพโดย AI
  8. AI เชิงสร้างสรรค์ (ไม่พร้อมใช้งานในจีนแผ่นดินใหญ่) 
    1. คำถามทั่วไปเกี่ยวกับ AI เชิงสร้างสรรค์ ใน Photoshop
    2. เติมโดย AI ใน Photoshop บนเดสก์ท็อป
    3. สร้างภาพด้วยพรอมต์ข้อความอธิบาย
    4. ขยายโดย AI ใน Photoshop บนเดสก์ท็อป
    5. แทนที่พื้นหลังด้วย สร้างพื้นหลัง
    6. รับรูปแบบใหม่ด้วย สร้างสิ่งที่คล้ายกัน
    7. เลือกโมเดล AI สำหรับการควบคุมการสร้าง
    8. เติมโดย AI ใน Photoshop บน iPad
    9. ขยายโดย AI ใน Photoshop บน iPad
    10. คุณสมบัติ AI เชิงสร้างสรรค์ ใน Photoshop บนเว็บ
  9. ความถูกต้องของเนื้อหา (ไม่พร้อมใช้งานในจีนแผ่นดินใหญ่)
    1. Content Credentials ใน Photoshop
    2. ตัวตนและแหล่งสำหรับ NFT
    3. เชื่อมต่อบัญชีสำหรับแอตทริบิวต์สร้างสรรค์
  10. เอกสารระบบคลาวด์ (ไม่พร้อมใช้งานในจีนแผ่นดินใหญ่)
    1. เอกสารระบบคลาวด์ใน Photoshop | คำถามทั่วไป
    2. เอกสารระบบคลาวด์ใน Photoshop | คำถามเกี่ยวกับขั้นตอนการทำงาน
    3. จัดการและทำงานกับเอกสารระบบคลาวด์ใน Photoshop
    4. อัปเกรดพื้นที่เก็บข้อมูลบนระบบคลาวด์สำหรับ Photoshop
    5. ปิดใช้งานเพื่อสร้างหรือบันทกเอกสารระบบคลาวด์
    6. แก้ไขข้อผิดพลาดเกี่ยวกับเอกสารระบบคลาวด์ของ Photoshop
    7. รวบรวมบันทึกการซิงค์เอกสารระบบคลาวด์
    8. เชิญผู้อื่นให้แก้ไขเอกสารระบบคลาวด์ของคุณ
    9. แชร์เอกสารเพื่อตรวจทาน
  11. Workspace
    1. พื้นฐานเกี่ยวกับ Workspace
    2. การกำหนดค่า
    3. เรียนรู้ได้เร็วขึ้นด้วยแผงค้นหาของ Photoshop
    4. สร้างเอกสาร
    5. วางไฟล์
    6. ทางลัดแป้นพิมพ์เริ่มต้น
    7. กำหนดทางลัดแป้นพิมพ์เอง
    8. แกลเลอรีเครื่องมือ
    9. การกำหนดค่าประสิทธิภาพ
    10. แถบงานตามบริบท
    11. ใช้เครื่องมือ
    12. ค่าที่ตั้งไว้ล่วงหน้า
    13. กริดและแนวเส้น
    14. ท่าทางการสัมผัส
    15. ใช้แถบสัมผัสด้วย Photoshop
    16. ความสามารถสัมผัสและพื้นที่ทำงานแบบปรับแต่งได้
    17. ตัวอย่างเทคโนโลยี
    18. เมตาดาต้าและบันทึก
    19. วางภาพของ Photoshop ในแอปพลิเคชันอื่น
    20. ไม้บรรทัด
    21. แสดงหรือซ่อนรายการพิเศษที่ไม่ได้พิมพ์
    22. ระบุคอลัมน์สำหรับภาพ
    23. เลิกทำหรือประวัติ
    24. แผงและเมนู
    25. จัดตำแหน่งองค์ประกอบด้วยการสแนป
    26. จัดตำแหน่งด้วยเครื่องมือไม้บรรทัด
    27. จัดระเบียบ แชร์ และทำงานร่วมกันด้วยโปรเจค
    28. ปรับแต่งผลงานที่สร้างจาก Adobe Firefly
  12. พื้นฐานเกี่ยวกับภาพและสี
    1. วิธีการปรับขนาดภาพ
    2. ทำงานกับภาพราสเตอร์และเวกเตอร์
    3. ขนาดและความละเอียดของภาพ
    4. รับภาพจากกล้องและสแกนเนอร์
    5. สร้าง เปิด และนำเข้าภาพ
    6. ดูภาพ
    7. ข้อผิดพลาดมาร์กเกอร์ JPEG ไม่ถูกต้อง | การเปิดภาพ
    8. การดูภาพหลายภาพ
    9. กำหนดตัวเลือกสีและชุดสีเอง
    10. ภาพที่มีช่วงไดนามิกสูง
    11. จับคู่สีในภาพของคุณ
    12. แปลงระหว่างโหมดสี
    13. โหมดสี
    14. ลบส่วนต่างๆ ของภาพ
    15. โหมดการผสมผสาน
    16. เลือกสี
    17. กำหนดตารางสีตามดัชนี
    18. ข้อมูลภาพ
    19. ตัวกรองความบิดเบี้ยวไม่พร้อมใช้งาน
    20. เกี่ยวกับสี
    21. การปรับสีและโมโนโครมโดยใช้ช่องต่างๆ
    22. เลือกสีในแผงสีและชุดสี
    23. ตัวอย่าง
    24. โหมดสีหรือโหมดภาพ
    25. แสงทอด
    26. เพิ่มการเปลี่ยนโหมดแบบมีเงื่อนไขให้เป็นการดำเนินการ
    27. เพิ่มชุดสีจาก HTML CSS และ SVG
    28. ความลึกของบิตและการกำหนดค่า
  13. เลเยอร์
    1. พื้นฐานของเลเยอร์
    2. การตัดต่อที่ไม่ทำให้ภาพต้นฉบับเสียหาย
    3. สร้างและจัดการผู้ใช้และกลุ่ม
    4. เลือก จัดกลุ่ม และเชื่อมโยงเลเยอร์
    5. วางภาพลงในเฟรม
    6. ความเข้มและการผสมผสานเลเยอร์
    7. มาสก์เลเยอร์
    8. นำสมาร์ทฟิลเตอร์ไปใช้
    9. องค์ประกอบเลเยอร์
    10. ย้าย เรียงซ้อน และล็อคเลเยอร์
    11. มาสก์เลเยอร์ด้วยมาสก์เวกเตอร์
    12. จัดการเลเยอร์และกลุ่ม
    13. เอฟเฟ็กต์และสไตล์ของเลเยอร์
    14. แก้ไขมาสก์เลเยอร์
    15. แยกเนื้อหา
    16. แสดงเลเยอร์ด้วยมาสก์การตัด
    17. สร้างเนื้อหาภาพจากเลเยอร์
    18. ทำงานกับ Smart Object
    19. โหมดการผสมผสาน
    20. รวมภาพหลายๆ ให้เป็นภาพบุคคลกลุ่ม
    21. รวมภาพด้วยการผสมเลเยอร์อัตโนมัติ
    22. จัดเรียงและกระจายเลเยอร์
    23. คัดลอก CSS จากเลเยอร์
    24. โหลดส่วนที่เลือกจากเลเยอร์หรือขอบเขตของมาสก์เลเยอร์
    25. Knockout เพื่อแสดงเนื้อหาจากเลเยอร์อื่น
  14. การเลือก
    1. เริ่มต้นด้วยส่วนที่เลือก
    2. ทำการเลือกในองค์ประกอบภาพของคุณ
    3. เลือกและมาสก์พื้นที่ทำงาน
    4. เลือกด้วยเครื่องมือ Marquee
    5. เลือกด้วยเครื่องมือ Lasso
    6. ปรับการเลือกพิกเซล
    7. ย้าย คัดลอก และลบพิกเซลที่เลือก
    8. สร้างมาสก์ด่วนชั่วคราว
    9. เลือกช่วงสีในภาพ
    10. แปลงระหว่างเส้นทางและขอบเขตส่วนที่เลือก
    11. พื้นฐานเกี่ยวกับช่อง
    12. บันทึกส่วนที่เลือกและมาสก์ช่องอัลฟา
    13. เลือกพื้นที่ภาพที่อยู่ในโฟกัส
    14. ทำซ้ำ แยก และรวมช่อง
    15. การคำนวณช่อง
  15. การปรับภาพ
    1. แทนที่สีของวัตถุ
    2. การบิดตามมุมมอง
    3. ลดความเบลอจากการสั่นของกล้อง
    4. ตัวอย่างแปรงแก้ไข
    5. ส่งออกเทมเพลตปรับค่าสี
    6. ปรับความคมชัดและความเบลอของภาพ
    7. ทำความเข้าใจเกี่ยวกับการปรับแต่งสี
    8. นำการปรับแต่งความสว่าง/คอนทราสต์ไปใช้งาน
    9. ปรับรายละเอียดเงาและไฮไลต์
    10. การปรับระดับ
    11. ปรับสีสันและความเข้ม
    12. ปรับความสด
    13. ปรับความเข้มในพื้นที่ภาพ
    14. ทำการปรับโทนสีด่วน
    15. นำเอฟเฟ็กต์สีพิเศษไปใช้กับภาพ
    16. ปรับปรุงภาพด้วยการปรับสมดุลสี
    17. ภาพที่มีช่วงไดนามิกสูง
    18. ดูฮิสโตแกรมและค่าพิกเซล
    19. จับคู่สีในภาพของคุณ
    20. ครอบตัดและจัดภาพถ่ายให้ตรง
    21. แปลงภาพสีเป็นภาพขาวดำ
    22. เลเยอร์การปรับแต่งและเลเยอร์การเติม
    23. การปรับแต่งเคิร์ฟ
    24. โหมดการผสมผสาน
    25. กำหนดภาพต่างๆ สำหรับการพิมพ์
    26. ปรับแต่งสีและโทนสีด้วยหลอดดูดสีปรับระดับหรือเคิร์ฟ
    27. ปรับแต่งค่าการรับแสงและปรับโทนสี HDR
    28. ปรับให้พื้นที่ในภาพสว่างขึ้นหรือมืดลง
    29. ปรับสีที่เลือก
  16. Adobe Camera Raw
    1. ความต้องการของระบบ Camera Raw
    2. มีอะไรใหม่ใน Camera Raw
    3. บทนำสู่ Camera Raw
    4. สร้างภาพพาโนรามา
    5. เลนส์ที่รองรับ
    6. ทำการปรับแต่งสีและโทนใน Camera Raw
    7. เอฟเฟ็กต์ขอบมืด หยาบ และลบหมอกควันใน Camera Raw
    8. ทางลัดแป้นพิมพ์เริ่มต้น
    9. การแก้ไขมุมมองอัตโนมัติใน Camera Raw
    10. ตัวกรองรวมแสงใน Camera Raw
    11. จัดการการตั้งค่า Camera Raw
    12. เปิด ประมวลผล และบันทึกภาพใน Camera Raw
    13. ซ่อมแซมภาพด้วยเครื่องมือการลบจุดที่ดียิ่งขึ้นใน Camera Raw
    14. หมุน ครอบตัด และปรับแต่งภาพ
    15. ปรับแต่งเรนเดอร์ของสีใน Camera Raw
    16. เวอร์ชันประมวลผลใน Camera Raw
    17. ทำการปรับแต่งเฉพาะส่วนใน Camera Raw
    18. ลบผู้คนที่ไม่พึงประสงค์
    19. ลบการสะท้อน
    20. ดูสถานะการแก้ไข AI และจัดการกับการอัปเดต
  17. ซ่อมแซมและฟื้นฟูภาพ
    1. ลบวัตถุและผู้คนที่ไม่ต้องการด้วยเครื่องมือลบออก
    2. ลบวัตถุออกจากภาพถ่ายด้วยการเติมแบบรับรู้เนื้อหา
    3. ปะและย้ายแบบรับรู้เนื้อหา
    4. รีทัชและซ่อมแซมภาพถ่าย
    5. แก้ไขความบิดเบี้ยวและจุดรบกวนของภาพ
    6. ขั้นตอนการแก้ไขปัญหาพื้นฐานสำหรับปัญหาส่วนใหญ่
  18. การปรับแต่งและการแปลงภาพ
    1. แทนที่ท้องฟ้าในภาพของคุณ
    2. แปลงวัตถุ
    3. ปรับการครอบตัด การหมุน และขนาดผ้าใบ
    4. วิธีการครอบตัดและปรับภาพถ่ายให้ตรง
    5. สร้างและแก้ไขภาพพาโนรามา
    6. บิดภาพ รูปทรง และเส้นทาง
    7. Vanishing Point
    8. การปรับขนาดแบบรับรู้เนื้อหา
    9. แปลงภาพ รูปทรง และเส้นทาง
  19. การวาดและการระบาย
    1. ระบายรูปแบบแบบสมมาตร
    2. วาดสี่เหลี่ยมผืนผ้าและปรับเปลี่ยนตัวเลือกการลากเส้น
    3. เกี่ยวกับการวาด
    4. วาดและแก้ไขรูปร่าง
    5. สร้างรูปดาวหรือรูปร่างแหลมอื่นๆ
    6. เครื่องมือการระบายสี
    7. สร้างและปรับเปลี่ยนแปรง
    8. โหมดการผสมผสาน
    9. เพิ่มสีให้กับเส้นทาง
    10. แก้ไขเส้นทาง
    11. ระบายด้วยแปรงมิกเซอร์
    12. ค่าที่ตั้งไว้ล่วงหน้าของแปรง
    13. การไล่ระดับสี
    14. การประมาณค่าการไล่ระดับสี
    15. เติมและการลากเส้นส่วนที่เลือก เลเยอร์ และเส้นทาง
    16. วาดด้วยเครื่องมือปากกา
    17. สร้างรูปแบบ
    18. สร้างรูปแบบโดยใช้ตัวสร้างรูปแบบ
    19. จัดการเส้นทาง
    20. จัดการไลบรารีและค่าที่ตั้งไว้ล่วงหน้าของรูปแบบ
    21. วาดหรือระบายด้วยแท็บเล็ตกราฟิก
    22. สร้างแปรงที่มีพื้นผิว
    23. เพิ่มองค์ประกอบไดนามิกให้กับแปรง
    24. การไล่ระดับสี
    25. ระบายลายเส้นสไตล์ด้วยแปรงกลับคืนทางศิลปะ
    26. ระบายด้วยลวดลาย
    27. ซิงค์ค่าที่ตั้งไว้ล่วงหน้าบนหลายอุปกรณ์
    28. ย้ายค่าที่ตั้งไว้ล่วงหน้า การดำเนินการ และการตั้งค่า
  20. ข้อความ
    1. เพิ่มและแก้ไขข้อความ
    2. ระบบข้อความที่รวมเป็นหนึ่ง
    3. ทำงานกับแบบอักษร OpenType SVG
    4. จัดรูปแบบตัวอักษร
    5. จัดรูปแบบย่อหน้า
    6. วิธีสร้างเอฟเฟ็กต์การพิมพ์
    7. แก้ไขข้อความ
    8. ระยะห่างบรรทัดและตัวอักษร
    9. การพิมพ์ภาษาอาหรับและฮิบรู
    10. แบบอักษร
    11. แก้ไขปัญหาแบบอักษร
    12. การพิมพ์ภาษาเอเชีย
    13. สร้างการพิมพ์
  21. ตัวกรองและเอฟเฟ็กต์
    1. ใช้แกลเลอรีเบลอ
    2. พื้นฐานต่างๆ ของตัวกรอง
    3. การอ้างอิงเอฟเฟ็กต์ตัวกรอง
    4. เพิ่มเอฟเฟ็กต์แสง
    5. ใช้ตัวกรองมุมกว้างที่ปรับเปลี่ยนได้
    6. ใช้ตัวกรองสีน้ำมัน
    7. ใช้ตัวกรองลิควิฟาย
    8. เอฟเฟ็กต์และสไตล์ของเลเยอร์
    9. นำตัวกรองที่เฉพาะเจาะจงไปใช้
    10. ทำรอยเปื้อนในพื้นที่ในภาพ
  22. การบันทึกและการส่งออก
    1. บันทึกไฟล์ของคุณใน Photoshop
    2. ส่งออกไฟล์ของคุณใน Photoshop
    3. รูปแบบไฟล์ที่รองรับ
    4. บันทึกไฟล์ในรูปแบบกราฟิก
    5. ย้ายการออกแบบระหว่าง Photoshop และ Illustrator
    6. บันทึกและส่งออกวิดีโอและภาพเคลื่อนไหว
    7. บันทึกไฟล์ PDF
    8. การปกป้องลิขสิทธิ์ Digimarc
  23. การจัดการสี
    1. การทำความเข้าใจการจัดการสี
    2. การคงความสอดคล้องของสี
    3. การตั้งค่าสี
    4. สองโทนสี
    5. ทำงานกับโปรไฟล์สี
    6. เอกสารการจัดการสีสำหรับการดูออนไลน์
    7. เอกสารการจัดการสีเมื่อพิมพ์
    8. รูปที่นำเข้าพร้อมการจัดการสี
    9. การพิสูจน์สี
  24. การออกแบบเว็บ หน้าจอ และแอป
    1. Photoshop สำหรับการออกแบบ
    2. อาร์ตบอร์ด
    3. ตัวอย่างอุปกรณ์
    4. คัดลอก CSS จากเลเยอร์
    5. เว็บเพจแบบสไลซ์
    6. ตัวเลือก HTML สำหรับสไลซ์
    7. ปรับเปลี่ยนเค้าโครงสไลซ์
    8. ทำงานกับกราฟิกบนเว็บ
    9. สร้างแกลเลอรีภาพถ่ายบนเว็บ
  25. วิดีโอและภาพเคลื่อนไหว
    1. การตัดต่อวิดีโอใน Photoshop
    2. ตัดต่อเลเยอร์วิดีโอและภาพเคลื่อนไหว
    3. ภาพรวมวิดีโอและภาพเคลื่อนไหว
    4. ดูตัวอย่างวิดีโอและภาพเคลื่อนไหว
    5. ระบายเฟรมต่างๆ ในเลเยอร์วิดีโอ
    6. นำเข้าไฟล์และลำดับภาพ
    7. สร้างภาพเคลื่อนไหวของเฟรม
    8. ภาพเคลื่อนไหว 3D ของ Creative Cloud (ตัวอย่าง)
    9. สร้างภาพเคลื่อนไหวของไทม์ไลน์
    10. สร้างภาพสำหรับวิดีโอ
  26. การพิมพ์
    1. พิมพ์วัตถุ 3D
    2. พิมพ์จาก Photoshop
    3. พิมพ์ด้วยการจัดการสี
    4. Contact Sheet และการนำเสนอ PDF
    5. พิมพ์รูปภาพในเค้าโครงแพ็คเกจภาพ
    6. พิมพ์สีเฉพาะจุด
    7. พิมพ์ภาพไปที่แท่นพิมพ์เชิงพาณิชย์
    8. ปรับปรุงการพิมพ์สีจาก Photoshop ให้ดีขึ้น
    9. แก้ไขปัญหาเกี่ยวกับการพิมพ์ | Photoshop
  27. ทำให้เป็นอัตโนมัติ
    1. การดำเนินการการสร้าง
    2. สร้างกราฟิกที่มาจากข้อมูล
    3. การเขียนสคริปต์
    4. ประมวลผลชุดไฟล์
    5. เล่นและจัดการการดำเนินการ
    6. เพิ่มการดำเนินการแบบมีเงื่อนไข
    7. เกี่ยวกับการดำเนินการและแผงการดำเนินการ
    8. เครื่องมือบันทึกในการดำเนินการ
    9. เพิ่มการเปลี่ยนโหมดแบบมีเงื่อนไขให้เป็นการดำเนินการ
    10. ชุดเครื่องมือ UI ของ Photoshop สำหรับปลั๊กอินและสคริปต์
  28. การแก้ไขปัญหา
    1. ปัญหาที่ได้รับการแก้ไขแล้ว 
    2. ปัญหาที่ทราบ
    3. เพิ่มประสิทธิภาพให้กับ Photoshop
    4. การแก้ไขปัญหาพื้นฐาน
    5. แก้ไขการแครชหรือค้าง
    6. แก้ไขข้อผิดพลาดของโปรแกรม
    7. แก้ไขข้อผิดพลาดสแครตช์ดิสก์เต็ม
    8. แก้ไขปัญหาเกี่ยวกับไดรเวอร์ GPU และกราฟิก
    9. ค้นหาเครื่องมือที่สูญหาย
    10. Photoshop 3D | คำถามทั่วไปเกี่ยวกับคุณสมบัติที่ยกเลิก

Use data-driven graphics to work with templates created in Photoshop

Here's a scenario for you: 

It's your first week at work and you need to create five versions of a web banner with varying text and images using a single template design.

Did you know that data-driven graphics will be the best way to get your job done?

Follow these general steps to create consistent designs with different text and images using data sets:

  1. Create the base graphic you want to use as the template. 

    Use layers to separate the elements that you want to change in the graphic.

  2. Define variables in the graphic. As we know, variables specify the parts of the image that need to change.

  3. Create or import the data sets. Create the data sets in the template or import them from a text file. 

  4. Preview the document with each data set. Before you export the file, check the preview to know how your final image will appear. 

  5. Generate your graphics by exporting them with the data. We recommend using the Photoshop (PSD) format. 

    Use variables to create different versions of an image in Photoshop
    Use variables to create different versions of an image

Variables

Use variables to define which elements in a template need to change. You can define three types of variables.

Visibility Variable shows or hides the contents of a layer.

Text Replacement variables replace a string of text in a type layer.

Pixel Replacement variables replace the pixels in the layer with pixels from another image file.

หมายเหตุ:

You cannot define variables when working with the Background layer. 

Work with a variable

  1. Go to Image > Variables > Define.

  2. Select your preferred layer from the Layer pop‑up menu with the content to be defined as a variable.

  3. Select one or more types of variables: Visibility, Pixel Replacement, and Text Replacement.

    Visibility: Shows or hides the content of the layer or the layer group

    Pixel Replacement: Replaces the pixels in the layer with pixels from another image file

    Text Replacement: Replaces a string of text in a type layer

  4. Do one of the following:

    • Enter a name for the variable in the Name field. Variable names can begin with a letter, underscore, or colon. They cannot contain spaces or special characters (except for periods, hyphens, underscores, and colons).

      Or,

    • Choose an existing variable from the Name drop-down menu to link the layer. Layers linked to the same variable are shown next to the Name menu, along with the link icon.

  5. Follow these steps when using Pixel Replacement variables.

    1. Choose your preferred method to scale the replacement image:
      • The Fit method resizes the image to fit it in the bounding box while preserving proportions.
      • The Fill method resizes the image to fill the bounding box while preserving proportions. It may overlap edges in one dimension.
      • The As Is method preserves the size of the replacement image. It may overlap edges in one or both dimensions. 
      • The Conform method resizes the image to fill the bounding box. It may not preserve the original proportions. 
    2. Select a handle on the alignment icon to choose an alignment for placing the image inside the bounding box. (This option isn't available for Conform.)
    3. Check Clip To Bounding Box to clip areas of the image that don't fit in the bounding box. This option is available only when the Fill or As Is replacement method is selected. (This option isn't available for Conform.)
    The Fit method resizes the image to fit it in the bounding box while preserving proportions.
    The Fit method resizes the image to fit it in the bounding box while preserving proportions.

  6. To define variables for another layer, choose a layer from the Layer pop‑up menu and select OK.

    An asterisk appears next to the name of a layer that contains variables. You can use the navigation arrows to move between layers.

Rename a variable

  1. Go to Image > Variables > Define.

  2. Choose the layer that contains the variable from the Layer pop‑up menu.

  3. To rename the variable, enter a name in the Name text box.

    Variable names must begin with a letter, underscore, or colon and cannot contain spaces or special characters (except for periods, hyphens, underscores, and colons).

  4. Deselect the variable to remove it.

Data sets

A data set is a collection of variables and associated data. You can define a data set for each version of the graphic that you want to generate.

  1. Do one of the following:

    • Go to Image > Variables > Data Sets

    Or,

    • If the Variables dialog box is open, select Data Sets from the drop-down menu or select Next.
    หมายเหตุ:

    At least one variable needs to be defined before the default data set can be edited. 

  2. Select the new data set button () to create a new data set based on the current data set.

  3. Select a variable from the Name drop-down list.

  4. Edit the variable data:

    • For Visibility variables, select Visible (to show the layer’s content) or Invisible (to hide the layer’s content).

    • For Pixel Replacement variables, select Select File and then the replacement image file. Select Do Not Replace before the data set is applied to leave the layer in its current state.

    หมายเหตุ:

    The Do Not Replace button does not reset the file to its original state if another replacement has been applied previously.

    • For Text Replacement variables, enter a text string in the Value text box.
  5. Define additional data sets for each version of the graphic you want to generate.

Edit, rename, or delete your data set by first choosing it from the Data Set menu and editing the options. Use the arrow icons to move between data sets. Hit the Delete icon to delete a data set.

Preview or apply a data set

Apply the contents of a data set to your base image even while leaving the variables and data sets intact.

This will change the view of your image to contain the values of the data set. Use the Preview option to view how each version will appear with each data set.

Go to Image > Apply Data Set to select the data set from the list and preview the image in the document window.

Select Apply to apply the data set. Hit Cancel if you only want to preview and don’t want to change the base image.

You can also apply and preview a data set by navigating to Image > Variables > Data Sets and checking the Preview checkbox.

หมายเหตุ:

Applying a data set overwrites your original document.

Generate graphics using data sets

Once you've defined the variables and one or more data sets, you can generate batch mode output images using these data set values. The output generated will be in the form of PSD files.

  1. Go to File > Export > Data Sets As Files.

  2. Enter a base name for all files generated. You may create your own file-naming scheme if you want.
  3. Use the Select Folder button to select a destination directory for your files.

  4. Choose data sets to export and hit OK.

Create data sets in external files

You can quickly create a large number of data sets by using an external text file that contains all the variable information and importing it into your PSD document containing variables.

One method is to enter your data into a text file or Microsoft Excel spreadsheet and then export it to a tab or comma-separated file.

Follow the given syntax for your external text file (where each line that starts with “Variable” or “Value” is an entire line by itself in your file):

VariableName1<sep>VariableName2<sep> <sep>VariableNameN <nl> 
Value1-1<sep>Value2-1<sep><sep>ValueN-1<nl> 
Value1-2<sep>Value2-2<sep><sep>ValueN-2<nl> 
Value1-M<sep>Value2-M<sep><sep>ValueN-M<nl>

All the variable names are listed on the first line, in the order that the values are given in subsequent lines. Each subsequent line represents one data set, with the values for each variable given.

หมายเหตุ:

To create multiple lines of text in a single line of text in a data set, enclose the text in double quotes and insert hard returns in the tab- or comma-separated file where you want the breaks to occur.  

External text file Syntax elements

<sep>

Either a comma-separated (CSV) or a tab (tab-delimited) file that separates each variable name or value

<nl>

A newline character that ends each data set and can be a line feed, carriage return, or both

“true” and “false”

Allowed values for a visibility variable

Spaces

Spaces around the delimiter are removed when parsing the file; between words in a value string (e.g., two of a kind) spaces are maintained and leading and trailing spaces are maintained if enclosed in double quotes (e.g., “one kind ”)

Double quotes

Can be part of a value if preceded by another double quote (e.g., ““B”” would be “B” in the data set)

If <sep> or <nl> is part of the variable value, then you need to enclose the entire value within double quotes.

All the variables defined in your PSD file must be defined in the text file, or an error will display if there is a mismatch between the number of variables in the text file and your document.

Example data set

Create a text file using a template for flowers that holds variables for tulips and sunflowers. It could be as shown here:

{contents of FlowerShow.txt} 
Variable 1, Variable 2, Variable 3 
true, TULIP, c:\My Documents\tulip.jpg 
false, SUNFLOWER, c:\My Documents\sunflower.jpg 
false, CALLA LILY, c:\My Documents\calla.jpg 
true, VIOLET, c:\My Documents\violet.jpg
หมายเหตุ:

You can use a relative path for the image location if the text file is in the same folder as the image file. For example, the last item in the example can be: true, VIOLET, violet.jpg.

Import a data set

  1. Do one of the following:

    • Go to File > Import > Variable Data Sets.

    Or,

    • Go to Image > Variables > Data Sets and use the Import button to navigate to the text file to import.
  2. Set up your import options.

    • Use First Column For Data Set Names: Names each data set using the content of the first column of the text file (the values for the first variable listed). Otherwise, the data sets are named Data Set 1, Data Set 2, and so on.
    • Replace Existing Data Sets: Deletes any existing data sets before importing
  3. Set the encoding of the text file or leave the setting Automatic before selecting OK.

Adobe, Inc.

รับความช่วยเหลือได้เร็วและง่ายกว่าเดิม

หากคุณเป็นผู้ใช้ใหม่