Kasutusjuhend Tühista

Deploy Adobe packages with SCCM

  1. Adobe ettevõtetele ja meeskondadele: administreerimisjuhend
  2. Juurutamise planeerimine
    1. Põhimõisted
      1. Litsentsimine
      2. Identiteet
      3. Kasutajate haldamine
      4. Rakenduste juurutamine
      5. Admin Console'i ülevaade
      6. Administraatori rollid
    2. Juurutamisjuhised
      1. Nimeliste kasutajate juurutamisjuhend
      2. SDL juurutamisjuhend
      3. Adobe Acrobati juurutamine 
    3. Creative Cloud haridusasutustele – juurutamine
      1. Juurutamisjuhend
      2. Adobe rakenduste kinnitamine Google Admin Console'is
      3. Adobe Expressi lubamine Google Classroomis
      4. Integratsioon Canvas LMS-iga
      5. Integratsioon Blackboard Learniga
      6. SSO konfigureerimine piirkonna portaalide ja LMS-ide jaoks
      7. Adobe Expressi juurutamine läbi Google'i rakenduste litsentsimise
      8. Kasutajate lisamine nimekirja sünkroonimise kaudu
      9. Kivuto KKK
      10. Esmaste ja teiseste asutuste õiguste suunised
  3. Oma organisatsiooni seadistamine
    1. Identiteeditüübid | Ülevaade
    2. Identiteedi seadistamine | Ülevaade
    3. Organisatsiooni seadistamine Enterprise ID-ga
    4. Azure AD föderatsiooni ja sünkroonimise seadistamine
      1. SSO seadistamine Microsoftiga Azure OIDC kaudu
      2. Azure'i sünkroonimise lisamine oma kataloogi
      3. Hariduse rollide sünkroonimine
      4. Azure Connectori KKK
    5. Google'i föderatsiooni ja sünkroonimise seadistamine
      1. SSO seadistamine Google'i föderatsiooniga
      2. Google Synci lisamine teie kataloogile
      3. Google'i föderatsiooni KKK
    6. Organisatsiooni seadistamine Microsoft ADFS-iga
    7. Organisatsiooni seadistamine piirkonna portaalide ja LMS-i jaoks
    8. Organisatsiooni seadistamine koos teiste identiteedi pakkujatega
      1. Kataloogi loomine
      2. Domeeni omandiõiguse kontrollimine
      3. Domeenide lisamine kataloogidele
    9. SSO levinud küsimused ja tõrkeotsing
      1. SSO levinud küsimused
      2. SSO tõrkeotsing
      3. Hariduse levinud küsimused
  4. Teie organisatsiooni seadistamise haldamine
    1. Olemasolevate domeenide ja kataloogide haldamine
    2. Automaatse konto loomise lubamine
    3. Organisatsiooni seadistamine kataloogi usalduse kaudu
    4. Üleminek uuele autentimise pakkujale 
    5. Varade sätted
    6. Autentimise sätted
    7. Privaatsuse ja turvalisuse kontaktid
    8. Konsooli sätted
    9. Krüpteerimise haldamine  
  5. Kasutajate haldamine
    1. Ülevaade
    2. Administratiivsed rollid
    3. Kasutajate haldamise meetodid
      1. Kasutajate individuaalne haldamine   
      2. Mitme kasutaja haldamine (hulgi CSV)
      3. Kasutajate sünkroonimisvahend (UST)
      4. Microsoft Azure'iga sünkroonimine
      5. Google'i föderatsiooniga sünkroonimine
    4. Kasutaja identiteedi tüübi muutmine
    5. Kasutajarühmade haldamine
    6. Kataloogi kasutajate haldamine
    7. Arendajate haldamine
    8. Olemasolevate kasutajate migreerimine Adobe Admin Console'i
    9. Kasutajate haldamise migreerimine Adobe Admin Console'i
  6. Toodete ja õiguste haldamine
    1. Toodete ja tooteprofiilide haldamine
      1. Toodete haldamine
      2. Ettevõtte kasutajate tooteprofiilide haldamine
      3. Automaatse määramise reeglite haldamine
      4. Kasutajatele Firefly kohandatud mudelite treenimise õiguse andmine
      5. Tootetaotluste läbivaatamine
      6. Iseteeninduse poliitikate haldamine
      7. Rakenduste integratsioonide haldamine
      8. Toodete õiguste haldamine Admin Console'is  
      9. Teenuste lubamine/keelamine tooteprofiili jaoks
      10. Üks rakendus | Creative Cloud ettevõtetele
      11. Valikulised teenused
    2. Jagatud seadmete litsentside haldamine
      1. Mis on uut
      2. Juurutamisjuhend
      3. Pakettide loomine
      4. Litsentside taastamine
      5. Profiilide haldamine
      6. Litsentsimise tööriistakomplekt
      7. Jagatud seadmete litsentsimise KKK
  7. Global Admin Console'iga alustamine
    1. Globaalse administreerimise kohandamine
    2. Organisatsiooni valimine
    3. Organisatsiooni hierarhia haldamine
    4. Tooteprofiilide haldamine
    5. Administraatorite haldamine
    6. Kasutajarühmade haldamine
    7. Organisatsiooni poliitikate uuendamine
    8. Poliitikamallide haldamine
    9. Lasteorganisatsioonidele toodete eraldamine
    10. Ootel tööde käivitamine
    11. Ülevaadetega tutvumine
    12. Organisatsiooni struktuuri eksportimine või importimine
  8. Salvestusruumi ja varade haldamine
    1. Salvestusruum
      1. Ettevõtte salvestusruumi haldamine
      2. Adobe Creative Cloud: salvestusruumi uuendamine
      3. Adobe salvestusruumi haldamine
    2. Varade migratsioon
      1. Automatiseeritud varade migratsioon
      2. Automatiseeritud varade migratsiooni KKK  
      3. Ülekantud varade haldamine
    3. Varade tagasinõudmine kasutajalt
    4. Üliõpilaste varade migratsioon | ainult EDU
      1. Automaatne üliõpilaste varade migratsioon
      2. Teie varade migratsioon
  9. Teenuste haldamine
    1. Adobe Stock
      1. Adobe Stocki krediidipaketid meeskondadele
      2. Adobe Stock ettevõtetele
      3. Adobe Stock ettevõtetele kasutamine
      4. Adobe Stocki litsentside heakskiitmine
    2. Kohandatud fondid
    3. Adobe Asset Link
      1. Ülevaade
      2. Kasutajarühma loomine
      3. Adobe Experience Manageri varade konfigureerimine
      4. Adobe Asset Linki konfigureerimine ja installimine
      5. Varade haldamine
      6. Adobe Asset Link XD jaoks
    4. Adobe Acrobat Sign
      1. Adobe Acrobat Signi seadistamine ettevõtte või meeskondade jaoks
      2. Adobe Acrobat Sign – meeskonna funktsiooni administraator
      3. Adobe Acrobat Signi haldamine Admin Console'is
    5. Creative Cloud ettevõtetele – tasuta liikmesus
      1. Ülevaade
  10. Rakenduste ja uuenduste juurutamine
    1. Ülevaade
      1. Rakenduste ja uuenduste juurutamine ja tarnimine
      2. Juurutamise planeerimine
      3. Juurutamise ettevalmistus
    2. Pakettide loomine
      1. Rakenduste pakendamine Admin Console'i kaudu
      2. Nimeliste kasutajate litsentsipakettide loomine
      3. Adobe pakettide mallid
      4. Pakettide haldamine
      5. Seadmete litsentside haldamine
      6. Seerianumbrite litsentsimine
    3. Pakettide kohandamine
      1. Creative Cloudi töölauarakenduse kohandamine
      2. Laienduste kaasamine teie paketti
    4. Pakettide juurutamine 
      1. Pakettide juurutamine
      2. Adobe pakettide juurutamine Microsoft Intune'i abil
      3. Adobe pakettide juurutamine SCCM-iga
      4. Adobe pakettide juurutamine ARD-ga
      5. Toodete installimine erandite kausta
      6. Creative Cloudi toodete desinstallimine
      7. Adobe provisioning toolkit enterprise editioni kasutamine
      8. Adobe Creative Cloudi litsentsimistunnused
    5. Uuenduste haldamine
      1. Adobe ettevõtte ja meeskondade klientide muutuste haldamine
      2. Uuenduste juurutamine
    6. Adobe Update Server Setup Tool (AUSST)
      1. AUSST ülevaade
      2. Sisemise uuenduste serveri seadistamine
      3. Sisemise uuenduste serveri haldamine
      4. AUSST tavalised kasutusjuhud   
      5. Sisemise värskenduste serveri tõrkeotsing
    7. Adobe Remote Update Manager (RUM)
      1. Adobe Remote Update Manageri kasutamine
      2. RUM-i vigade lahendamine
    8. Tõrkeotsing
      1. Creative Cloudi rakenduste installimise ja deinstalleerimise vigade tõrkeotsing
      2. Klientide masinate päring, et kontrollida, kas pakett on kasutusele võetud
      3. Creative Cloudi paketi veateade „Installimine ebaõnnestus”
    9. Pakettide loomine Creative Cloud Packageriga (CC 2018 või varasemad rakendused)
      1. Teave Creative Cloud Packageri kohta
      2. Creative Cloud Packageri väljalaskemärkused
      3. Rakenduste pakendamine
      4. Pakettide loomine Creative Cloud Packageri abil
      5. Nimeliste litsentsipakettide loomine
      6. Pakettide loomine seadme litsentsidega
      7. Litsentsipaketi loomine
      8. Pakettide loomine seerianumbri litsentsidega
      9. Pakendaja automatiseerimine
      10. Mitte-Creative Cloudi toodete pakendamine
      11. Konfiguratsioonide muutmine ja salvestamine
      12. Süsteemi tasandil lokaadi määramine
  11. Teie konto haldamine
    1. Meeskonnakonto haldamine
      1. Ülevaade
      2. Makseandmete uuendamine
      3. Arvete haldamine
      4. Lepinguomaniku muutmine
      5. Edasimüüja muutmine
    2. Litsentside määramine Teamsi kasutajale
    3. Toodete ja litsentside lisamine
    4. Meeskonna haldamine Adobe Expressis
    5. Uuendamised
      1. Meeskonnaplaanide liikmesus: uuendamine
      2. Ettevõtte VIP: uuendamised ja nõuetele vastavus
    6. ETLA lepingute automatiseeritud aegumise etapid
    7. Lepingutüüpide vahetamine olemasolevas Adobe Admin Console'is
    8. Ostutaotluse nõuetele vastavus
    9. Value Incentive Plan (VIP) Hiinas
    10. VIP Select abi
  12. Aruanded ja logid
    1. Auditilogi
    2. Määramise aruanded
    3. Sisulogid
  13. Abi saamine
    1. Ühenduse võtmine Adobe klienditeenindusega
    2. Meeskonnakontode tugivõimalused
    3. Ettevõtluskontode tugivõimalused
    4. Experience Cloudi tugivõimalused
Märkus.

Flash Player's end of life is December 31st, 2020. Please see the Flash Player EOL Enterprise Information page for details.

This article guides you through the process of creating an SCCM package to deploy an Adobe deployment package. Because both Adobe and Microsoft use the term package and because there are currently two versions of the Microsoft software in use, we use the following naming conventions for clarity in this article:

  • When referring to a package created with SCCM, we say SCCM package unless the context is very clear, when we may say just package.
  • When referring to a package created on the Adobe Admin Console, we say Adobe deployment package or Adobe package. We never use the term package alone to mean an Adobe package.

Preparation

SCCM is designed for a great variety of network configurations. The best choice of deployment configuration for the Adobe package and its product install folder is the TS option, where the Adobe package and its product install folder are placed together on the same distribution server or servers.

When you create a package for deployment in Windows, Creative Cloud Packager creates two folders in your specified Save to location, Exceptions and Build.

The Exceptions folder contains folders with installers of various kinds (EXE, AIR, MSI) that cannot be deployed using the main MSI installer (because it cannot contain an embedded installer). You must create separate SCCM installers for each of these, using instructions in the ExceptionInfo.txt file at the top level of the Exceptions folder. The folder can be empty if your package has no dependencies on other installers.

The Build folder contains an MSI file whose filename uses the Package Name that you specified, and a subfolder named Setup. The subfolders are required to run the MSI file and install the product successfully.

Note: The packages created by Creative Cloud Packager silently use the Adobe installer subsystem, which in turn uses the native Windows installer, MSI. Therefore, you cannot wrap an Adobe install package inside of a Windows package for use with MSI because Windows prohibits such a recursive use of MSI.

Create an SCCM package

Creating an SCCM package is a two-step process. First create a new SCCM package, then create install and uninstall programs.

Create a new SCCM package

  1. Open the New Package wizard.

    • Open the SCCM console.
    • Navigate to Computer Management > Software Distribution > Packages.
    • Right-click Packages, choose New, then click Package.
  2. In the New Package Wizard, name the new SCCM package.

    On the General tab:

    • Enter the name of the new SCCM package in the Name field. This field is required.
    • You can also enter values for the optional Version, Manufacturer, Language, and Comment fields.
    • Click Next.
  3. Specify the data source for the SCCM package.

    On the Data Source tab:

    • Select This Package Contains Source Files.
    • Click Set to the right of the Source Directory field. In the Set Source Directory dialog, select the type of path you want to use (UNC or local) and browse for or type in the path to the Build folder that contains the .msi file and supporting folders. Click OK.
    • On the Data Source tab, the path you just selected will show in the Source Directory field. Below that field, select Always obtain files from the source directory.
      Set the other choices as appropriate, then click Next.
  4. Specify where the SCCM package will be stored on distribution points.

    On the Data Access tab, select Access the distribution folder through common ConfigMgr package share, and then click Next.

  5. Specify distribution settings.

    • On the Distribution Settings tab, choose a sending priority. Select the Preferred Sender, if desired. Select other settings as appropriate, then click Next.
    • On the Reporting tab, select settings as appropriate, then click Next.
    • On the Security tab, select settings as appropriate, then click Next.
  6. View the new SCCM package summary.

    • Review all the settings for the new SCCM package. If you need to change anything, use the Previous buttons to do so and then the Next buttons to get back to this screen.
    • Click Next. The Confirmation tab is displayed.
    • Click Close to terminate package creation.

Create install and uninstall programs for the SCCM package

Creative Cloud Packager generates a single MSI file in the Build folder, which you use for both installation and uninstallation of the product or suite. (Uninstall is not available for update packages, only for installation packages.)

If you want, you can create two separate SCCM programs for an installation package: one for installation and another for uninstallation. Name these programs to make it obvious to the users on the target systems who choose what the commands will do.

  1. Open the New Program wizard.

    • From the SCCM console, navigate to Computer Management > Software Distribution > Packages.
    • Select the SCCM package you just created.
    • Under it, select Programs > New > Program.
  2. In the New Program wizard, specify the command line for the program.

    On the General tab:

    Enter a descriptive name (such as install_PS_1 or uninstall_PS_1) in the Name field, and an explanatory comment that describes what the program does.

    Click Browse. In the Open File dialog, choose the file type All Files (*.*), then browse to and select the MSI/EXE file. The details of this step vary for each command you create.

    For the install package, browse to your .exe file.

    When you return to the New Program wizard, append appropriate flags or options to the command after the filename in the Command Line text box.

    You must use the silent parameter for unattended installation. 

    Syntax:

    setup [--silent] [--ADOBEINSTALLDIR=] [--INSTALLLANGUAGE=]

    Example:

    setup.exe --silent --ADOBEINSTALLDIR="C:\InstallDir" --INSTALLLANGUAGE=fr_CA

    For more details on using this command, see Deploy using command line on Windows machines.

    For the uninstall package, browse to your .MSI file.

    For the uninstall package, use the msiexec command with the /uninstall parameter.

    Example:

    msiexec.exe /uninstall PS_1.msi /quiet

  3. On the Environment tab:

    • In the Program Can Run field, select Whether or not a user is logged in.
    • In the Run mode section, select Run with administrative rights. Be sure Allow users to interact with this program is turned OFF.

    Note: If you do not choose to run with administrative rights, the Application Manager writes its log file to a different location. See “Installation logs.”

  4. Set fields on the Advanced, Windows Installer, and MOM Maintenance tabs as appropriate, and click Next.

  5. Review the information on the summary screen. If you need to change anything, do so now. Then, from this screen, click Next. The Wizard Completed screen will appear. Click Close to terminate program creation.

Creating installers and uninstallers for Exceptions components

To create install and uninstall programs for the MSI, EXE, or AIR installers that are present in the Exceptions folder, use the commands described in the ExceptionInfo.txt file at the top level of the Exceptions folder.

For example, to create an SCCM install package for an MSI installer such as Adobe Flash Player 10, use this command:

msiexec.exe /i AdobeFlashPlayer10_plRel_mul.msi /qn

To create the uninstaller, use /uninstall instead of /i

msiexec.exe /uninstall AdobeFlashPlayer10_plRel_mul.msi /qn

Warning: For AIR-based installers, you can create a silent installer the same way, using the command listed in the ExceptionInfo.txt file. For these components, however, you cannot create a silent uninstaller. When uninstalling, you may need to uninstall AIR applications manually.

Select distribution points for the SCCM package

  1. Open the New Distribution Points wizard.

    • In the SCCM console, navigate to Computer Management > Software Distribution > Packages.
    • Select the SCCM package you just created.
    • Under it, select Distribution Points > New Distribution Points. This displays an introductory screen. Click Next.
  2. In the New Distribution Points wizard, select the distribution points to which you want to copy the SCCM package.

    It is assumed that at this point the distribution points you want to use for this SCCM package have already been created. You can select one or more distribution points for this package.

  3. View the Wizard Completed screen and click Close.

Advertise the SCCM package programs

Follow the directions in this section once for each SCCM package program you want to advertise. 

These directions assume you already have a collection with target systems where you will advertise the SCCM package programs.

  1. Open the Distribute Software to Collection wizard.

    • In the SCCM console, navigate to Computer Management > Collections.
    • Locate the collection you want to use to advertise this SCCM package.
    • Right-click on the collection name and choose Distribute > Software.
  2. In the Distribute Software to Collection wizard, choose the SCCM package to advertise.

    On the Package tab:

    • Turn on Select an existing package.
    • Click the Browse button next to the text field. In the Select a Package dialog, locate the desired SCCM package and select it. Then click OK. Your selection will appear in the text field on the Package tab.
    • Click Next.
  3. Make sure you have chosen the distribution points to which you want to copy the SCCM package.

    On the Distribution Points tab, select the distribution point(s) you want to use to distribute this SCCM package. Then click Next.

  4. Select the SCCM package program to advertise.

    On the Select Program tab:

    • The SCCM package name and its programs are displayed. In the Programs: area, select the program you wish to advertise.
    • Click Next.
  5. Set advertisement characteristics.

    On the Advertisement Name tab:

    • Enter a name for the advertisement in the Name field.
    • Optionally, enter a comment that describes the advertisement in the Comment field.
    • Click Next.

    On the Advertisement Subcollection tab:

    • The name of the collection you chose for this advertisement is displayed in the Collection field. Choose whether you want this advertisement to be sent to any subcollections of this collection. The results of your choice are displayed in the field at the bottom of the tab.
    • Click Next.

    On the Advertisement Schedule tab:

    • Set the date and time you want the advertisement to occur.
    • Specify whether the advertisement will expire. If you want it to expire, set the expiration date and time.
    • Make any other settings as necessary and click Next.

    On the Assign Program tab:

    • Choose whether you want running this program to be mandatory. If you do, specify the date and time to force its execution. Notice the advertisement date from the previous tab is displayed here.
    • Set an expiration date if you want.
    • Choose other options as desired.
    • Click Next.
  6. View the summary screen for the advertisement.

    Review the information on the summary screen. If you need to change anything, do it now. Then, from this screen, click Next.

    The Wizard Completed screen will appear. Click Close to terminate advertisement creation.

When the SCCM package is advertised, the Windows toolbar of the target machines displays a notification that a program is scheduled to run.

Further reading

 Adobe

Saage abi kiiremini ja hõlpsamalt

Uus kasutaja?

Adobe MAX 2024

Adobe MAX
Loovuse konverents

14.–16. oktoobril Miami Beachis ja veebis

Adobe MAX

Loovuse konverents

14.–16. oktoobril Miami Beachis ja veebis

Adobe MAX 2024

Adobe MAX
Loovuse konverents

14.–16. oktoobril Miami Beachis ja veebis

Adobe MAX

Loovuse konverents

14.–16. oktoobril Miami Beachis ja veebis