- Adobe Enterprise & Teams: Panduan administrasi
- Rencanakan penerapan Anda
- Konsep dasar
- Panduan Penerapan
- Terapkan Creative Cloud for Education
- Beranda penerapan
- Wizard Orientasi K-12
- Penyiapan sederhana
- Menyinkronkan Pengguna
- Roster Sync K-12 (AS)
- Konsep pemberian lisensi utama
- Opsi penerapan
- Kiat ringkas
- Setujui aplikasi Adobe di Admin Console Google
- Aktifkan Adobe Express di Google Classroom
- Integrasi dengan Canvas LMS
- Integrasi dengan Blackboard Learn
- Mengonfigurasi SSO untuk Portal Distrik dan LMS
- Tambahkan pengguna melalui Roster Sync
- FAQ Kivuto
- Pedoman kelayakan institusi Primer dan Sekunder
- Atur organisasi Anda
- Tipe identitas | Ringkasan
- Atur identitas | Ringkasan
- Atur organisasi dengan Enterprise ID
- Atur federasi dan sinkronisasi Azure AD
- Atur Google Federation dan sinkronkan
- Atur organisasi dengan Microsoft ADFS
- Mengatur organisasi untuk Portal Distrik dan LMS
- Atur organisasi dengan Penyedia Identitas lainnya
- Pertanyaan umum dan pemecahan masalah SSO
- Kelola pengaturan organisasi Anda
- Mengelola pengguna
- Ikhtisar
- Peran administratif
- Strategi manajemen pengguna
- Tetapkan lisensi ke pengguna Tim
- Manajemen pengguna dalam aplikasi untuk tim
- Tambahkan pengguna dengan domain email yang cocok
- Mengubah jenis identitas pengguna
- Mengelola grup pengguna
- Mengelola pengguna direktori
- Mengelola pengembang
- Memigrasikan pengguna yang ada ke Adobe Admin Console
- Memigrasikan manajemen pengguna ke Adobe Admin Console
- Ikhtisar
- Mengelola produk dan hak
- Mengelola produk dan profil produk
- Mengelola produk
- Beli produk dan lisensi
- Mengelola profil produk untuk pengguna perusahaan
- Mengelola aturan penugasan otomatis
- Beri hak kepada pengguna untuk melatih model kustom Firefly
- Meninjau permintaan produk
- Mengelola kebijakan layanan mandiri
- Mengelola integrasi aplikasi
- Mengelola izin produk di Admin Console
- Mengaktifkan/menonaktifkan layanan untuk profil produk
- Aplikasi Tunggal | Creative Cloud untuk perusahaan
- Layanan opsional
- Mengelola lisensi Perangkat Bersama
- Mengelola produk dan profil produk
- Mulai menggunakan Global Admin Console
- Mengadopsi administrasi global
- Memilih organisasi Anda
- Mengelola hierarki organisasi
- Mengelola profil produk
- Mengelola administrator
- Mengelola grup pengguna
- Memperbarui kebijakan organisasi
- Mengelola templat kebijakan
- Mengalokasikan produk ke organisasi turunan
- Menjalankan pekerjaan yang tertunda
- Menjelajahi wawasan
- Mengekspor atau mengimpor struktur organisasi
- Kelola penyimpanan dan aset
- Penyimpanan
- Migrasi aset
- Klaim kembali aset dari pengguna
- Migrasi aset siswa | hanya untuk EDU
- Kelola layanan
- Adobe Stock
- Font khusus
- Adobe Asset Link
- Adobe Acrobat Sign
- Creative Cloud untuk perusahaan - keanggotaan gratis
- Terapkan aplikasi dan pembaruan
- Ikhtisar
- Buat paket
- Sesuaikan paket
- Terapkan Paket
- Terapkan paket
- Terapkan paket Adobe menggunakan Microsoft Intune
- Terapkan paket Adobe dengan SCCM
- Terapkan paket Adobe dengan ARD
- Instal produk di folder Pengecualian
- Hapus instalan produk Creative Cloud
- Gunakan edisi perusahaan toolkit penyediaan Adobe
- Pengidentifikasi pemberian lisensi Adobe Creative Cloud
- Terapkan paket
- Kelola pembaruan
- Adobe Update Server Setup Tool (AUSST)
- Adobe Remote Update Manager (RUM)
- Memecahkan masalah
- Kelola akun Teams Anda
- Perpanjangan
- Kelola kontrak
- Laporan & log
- Dapatkan bantuan
Set up the internal update server and then set up clients to use the server.
Adobe Update Server Setup Tool (AUSST) enables you to centralize the download of Adobe apps and updates to a single server location.
2. Set up the internal update server
You can set up an internal update server, with AUSST. Before setting up an internal update server you need an already up and running HTTP server (such as Apache or IIS). An HTTP server can host and serve static file content.
You can download the Adobe apps and updates from the Adobe Update server to your internal update server. You need to set up your clients or end users computers to get their apps and updates from your internal update server.
To check the system requirements, see AUSST web server system requirements.
Set up an HTTP server for use with AUSST
This section describes how to set up an HTTP server. The first procedure describes how to set up an Apache server on Mac. The second procedure describes how to set up an Internet Information Services (IIS) Server on Windows for use with AUSST.
Your AUSST server can be configured to allow connections via HTTP or HTTPS, as these protocols are supported. However, if you are using the HTTPS protocol, you’ll need to ensure that the HTTPS certificate is recognised as being valid by the computers on which the applications and updates are to be installed.
Set up an Apache HTTP server
-
Download and install an HTTP server.
-
Copy the update and installation files synchronized by AUSST, to a sub-directory accessible through the web-server.
- If you haven’t already downloaded the AUSST files, pass the command to copy the AUSST files to a folder under the HTTP server folder (here htdocs) folder. For more information, see Use the fresh sync option if multiple apps/updates are visible on end-user computers.
- If you have already downloaded the AUSST files, copy AUSST files to a folder inside the HTTP server folder. (here <xamppserver>\htdocs\<create a folder called AUSSTFiles>). For the new folder you have created in this step (here AUSSTFiles), change permissions to select to “Apply to enclosed items.”
-
Launch the HTTP server (here Xamppserver).
-
Start the HTTP web server. For example, in the xampp server, go to the Manage Servers tab and start the Apache web server.
-
Generate the .override files. For steps on generating the .override files, see Generating Client Configuration Files.
Set up IIS
The AUSST tool and the update mechanism used by CCD and RUM support IIS 7.5 and above, when an overrides file is in place on the client workstations. The screenshots and instructions below demonstrate IIS 8.5; the same settings should be applied to other versions of IIS.
-
Set up IIS 8.5 on any platform, such as Windows Server 2019. For steps on configuring IIS 8.5, see: http://www.iis.net/learn/install/installing-iis-85/installing-iis-85-on-windows-server-2012-r2.
- Add two additional Role Services manually: ISAPI Extensions and ISAPI Filters while configuring IIS 8.5.
- Click Install on the Confirmation screen.
Ensure to restart the server after you have installed the above given additional roles.
-
Select the server displayed in the left pane.
-
Click the Handler Mappings of the required website.
Note:The configuration changes are applied to all data referring to this (default in this example) website. You should, therefore, create a separate website for updater- related data and apply these configuration-related changes to this separate website, so that the other sites are not affected.
-
Select the Add Module Mapping option.
-
Add Module Mapping for .xml extension. You may use the details as shown in the sample dialog box.
-
After the extension is added, the system displays the Add Module Mapping dialog box. Click Yes.
-
Similarly add Module Mapping for the given extensions:
- ·crl
- .zip
- .dmg
- .sig
- .json
- .arm
Check that you have added Module Mapping for all the above listed extensions.
-
For Acrobat and Adobe Reader, you will need to add the application/octet-stream MIME Types for the .msp, .pkg, and .arm extensions.
- Select the Server displayed in the left pane.
- Add the MIME Type.
- Add the details as shown in the sample dialog box.
-
Similarly add MIME types for the .pkg, and .arm extensions.
Check you have added the MIME type for all three mentioned extensions.
-
Confirm that the web server works by opening a web browser on the server itself. Verify that the following default web page is displayed when you use the http://localhost address.
Set up the internal update server with AUSST tool
The steps to set up an internal update server are described in the following sections. However, before proceeding you need an already up and running HTTP server (such as Apache or IIS) that can host and serve static file content.
See Set up IIS for a step-by-step guide to setting up IIS for use with AUSST.
Download AUSST
AUSST is a command-line tool and needs no separate installation steps. There are no restrictions on where AUSST should be located on the computer.
In the Admin Console navigate to Packages > Tools.
On the Adobe Update Server Setup Tool card, click to download AUSST for your operating system app.
Ensure that you've downloaded the latest version of the Adobe Update Server Setup Tool from the admin console, to set up your internal update server.
To ensure that the Update server runs without interruption confirm that you have allowed access to the endpoints in Adobe Creative Cloud Network Endpoints.
The paths provided to all the command-line options in the following section must be absolute paths. AUSST does not support relative paths.
-
Within your web folder, create a folder (root) that you will use to download the Adobe apps and updates from the Adobe Update server.
For example: C:\inetpub\wwwroot\updates
The root folder location must map to a valid HTTP URL on your web server. To validate this, go to a browser and ensure that the folder root is accessible via an http request.
For example: http://ausstserver.example.com/updates/
-
Navigate to the folder in which you have downloaded the Adobe Update Server Setup Tool.
- cd <Absolute location of the folder which contains the Adobe Update Server Setup Tool>
For example: cd C:\AUSST
The root update folder (which we will use as an example throughout this document) on your web server is at the file-system location:
For example:
- macOS: /serverroot/updates/
- Windows: C:\inetpub\wwwroot\updates
Check that the root location has the correct Write permissions.
-
Enter the following command to do a fresh installation of the internal update server:
- Windows:
AdobeUpdateServerSetupTool.exe --root="<absolute location of the folder from Step 1 above>" --fresh - macOS:
AdobeUpdateServerSetupTool --root="<absolute location of the folder from Step 1 above>" --fresh
For example:
AdobeUpdateServerSetupTool --root="c:\inetpub\wwwroot\updates" --fresh
Ensure that there are no spaces around the = sign. Also, ensure that all options are preceded by a --(double minus) sign.
Note:Fresh sync is a time-consuming process and can take up to around 24 hours to complete. If a fresh sync fails during the process, you do not need to run the process again. You can download the remaining products using the incremental command.
Windows:
AdobeUpdateServerSetupTool.exe --root="<root folder>" --incremental
macOS:
AdobeUpdateServerSetupTool --root="<root folder>" --incremental
- Windows:
A full fresh sync requires approximately 600 GB (which may vary depending on the size of Adobe apps). Refer to the Common use cases for a selective sync.
After the synchronization of apps and updates with the Adobe Update server is complete, the AUSST tool creates an updated directory structure at the root folder location.
The folder structure matches that of the Adobe update server, and performs the initial synchronization that downloads all available apps and updates from the Adobe update server to your internal update server.
Verify your internal update server setup
-
Ensure that the web server is running correctly — confirm that the home page of the web server can be accessed by a browser from a client computer.
Verify that you can browse through the directories by clicking the directory links.
-
To verify that your server supports extension-less files open this URL in your web browser - you should see a string of letters:
http://<server name>/updates/ACC/services/ffc/icons/producticon
For example:
http://ausstserver.example.com/updates/ACC/services/ffc/icons/producticon
-
To verify that your server supports files with extensions, test that you can open the following XML file in a web browser from your server:
- If you have not set up product configuration groups:
http://<server name>/updates/ACC/services/ffc/products/ffc.xml
- If you have set up product configuration groups:
http://<server name>/updates/ACC/services/ffc/products/<groupName>ffc.xml
Note:The URLs for the server should include the protocol (such as http://). If the port number is different from the default value of 80, the port number should also be specified.
Check the firewall settings for the server if your verification on the client computer is not successful.
Incremental sync
To set up your internal update server, you use the --fresh option that downloads all Adobe apps and updates from the Adobe Update server. However, this is usually a one-time operation that you perform when you first set up your update server. After this you want to get only new apps versions and updates.
To get an incremental update from the Adobe Update server, use the following command:
The following commands show only the mandatory options to set up your server.
For details of all the available command options, see the section Maintaining AUSST. Or, to quickly get started, see the commonly used AUSST commands in the Common use cases.
Windows:
AdobeUpdateServerSetupTool.exe --root="C:\inetpub\wwwroot\updates" --incremental
macOS:
AdobeUpdateServerSetupTool --root="/Library/WebServer/Documents/ausst/" --incremental
To run this command at regular intervals, schedule a recurring job - Using Task Scheduler for Windows or Crontab for macOS.
A full fresh sync requries approximately 600 GB (which may vary depending on the size of Adobe apps). Refer to the Common use cases section for a selective sync.
Set up clients to use the internal update server
After you have set up an internal update server to download Adobe apps and updates from the Adobe Update server, you still need to set up your end users to get their apps and updates from your internal update server.
For example, if end users use the Creative Cloud desktop app to get the latest version of an app, the app should not be downloaded and installed from the Adobe Update server. The app should be installed from your internal update server. If you are creating and deploying packages on your end-user computers, the installation of the apps in the packages should come from your internal update server.
When you migrate from one version of AUSST to another, run the following commands to re-generate the client configuration files and update these on the client computers.
Generate client configuration (.override) files
Client configuration(.override files) are required to create product groups. Later you can deploy the generated client configuration(.override files) to the different groups of users. To generate the configuration files, enter the following command in a command shell or terminal (using your own server information):
You can generate client configuration files after you have set up your internal update server and synchronized it with the Adobe update server.
-
Navigate to the folder in which you have downloaded the Adobe Update Server Setup Tool.
-
Enter the following command in a command shell or terminal (using your own server information):
- AdobeUpdateServerSetupTool --genclientconf="/serverroot/AdobeUpdaterClient" --root="/serverroot/updates/Adobe/CC" --url="http://<server name>"
For example:
AdobeUpdateServerSetupTool.exe --genclientconf="C:\inetpub\wwwroot\updates\config" --root="C:\inetpub\wwwroot\updates" --url="http://ausstserver.example.com/updates"
- server root is path of the root folder
- config is the folder for AUSST tool to generate the AdobeUpdaterClient configuration files
- url is the valid http path of the root folder
This command creates two client configuration files (one for Windows platform, and one for macOS platform), and in the following platform-specific folders under the path given in the --genclientconf option.
Note:The URLs for the server should include the protocol (such as http://). If the port number is different from the default value of 80, the port number should also be specified.
In this example, the new files are:
- ·Windows:
\serverroot\config\AdobeUpdaterClient\win\AdobeUpdater.Overrides
- ·macOS:
/serverroot/config/AdobeUpdaterClient/mac/AdobeUpdater.Overrides
Windows |
<Overrides> <Application appID="webfeed"> <Domain>http://ausstserver.example.com</Domain> <URL>/updates/webfeed/oobe/aam10/win/</URL> </Application> <Application appID="updates"> <Domain>http://ausstserver.example.com</Domain> <URL>/updates/updates/oobe/aam10/win/</URL> </Application> <Application appID="webfeed20"> <Domain>http://ausstserver.example.com</Domain> <URL>/updates/webfeed/oobe/aam20/win/</URL> </Application> ... </Overrides> |
macOS |
<Overrides> <Application appID="webfeed"> <Domain>http://ausstserver.example.com</Domain> <URL>/updates/webfeed/oobe/aam10/mac/</URL> </Application> <Application appID="updates"> <Domain>http://ausstserver.example.com</Domain> <URL>/updates/updates/oobe/aam10/mac/</URL> </Application> <Application appID="webfeed20"> <Domain>http://ausstserver.example.com</Domain> <URL>/updates/webfeed/oobe/aam20/mac/</URL> </Application> ... </Overrides> |
Deploying client configuration files
There are two ways of deploying the client configuration files(.overrides).
1. By including .overrides in the package itself
When you create packages to deploy apps and updates to your end users, follow the given steps to include the client configuration files in the package.
-
Log in to the Admin Console and navigate to Packages > Preferences.
-
Open the AdobeUpdater.Overrides file in any text editor. Copy and paste the entire contents of the file into the Internal Update Server box and click Save.
AUSST allows redirection of all kinds of packages.
-
AUSST allows redirection of all kinds of packages. To include overrides in your package, enable “Redirect to internal Adobe update server”. It will be deployed with package.
Now your packages are created, with the client configuration files.
When you deploy these packages on the end-user computers, the files are included as part of the deployment. Your end users computers are subsequently redirected to your internal update server for app and updates.
2. Manually placing .overrides files in the required directories
The alternative to applying the AUSST client configuration via installation package is to copy the file to each client computer to use your AUSST server for downloading updates instead of obtaining them from Adobe’s servers via the internet. Copy the .overrides file into the following locations depending on which operating system is installed, creating the relevant subdirectories if they are not already there. Restart the Creative Cloud Desktop application via ctrl+alt+R (Windows) or option+cmd+R (macOS) or reboot the client computer for the AUSST configuration to be applied.
Windows 7 or 10
- %SYSTEMDRIVE%\ProgramData\Adobe\AAMUpdater\1.0\
- %SYSTEMDRIVE%\Program Files (x86)\Common Files\Adobe\UpdaterResources
macOS
- /Library/Application Support/Adobe/AAMUpdater/1.0/
Additional videos to setup the internal update server
The content and voice-over for this video is currently available in English only.