Use this document for a list of bug fixes in the 13.0.2, 13.0.1, and 13.0 releases of Premiere Pro.
- Crash when switching into DM mode after dragging the application to another monitor.
- Crash when running a film project with multiple audio effects.
- Effect Controls Panel crashes randomly. The control points of curves cannot be selected and adjusted.
- In a locked project panel, double click opens importer dialog.
- Crash occurs on zooming video or image in program monitior to 400% and scrolling to the left on Mac OS.
- Multiple MXF files appear truncated on the system.
- Performance drop in SW decoding in the current build when compared to previous builds (12.11 and 12.12)
- UI delay on switching clips or locking audio tracks on Mac OS.
- Latest RED SDK produces occasional soft hang.
- Crash when creating dummy wifi access point on Mac OS.
- In H.624 encoding on Windows, Adaptive Match Source (High Bitrate) preset with SW encoding results in different bitrates.
- Clips imported from XML, AAF, prproj, or any other project are not referenced correctly.
- Import .stl as Teletext is handled as Open Subtitling.
- Locking audio tracks is slow with mix track option.
- In a submix track, you get an audio output buzz when playing silence with an effect.
- In multicam mode, playback has audio glitches.
- Deadlock with audio with transmit involved.
- Merged clips are deleted without warnings.
- Recovered clips are created with merged clips.
- Clips replaced in timeline appears black.
- In a non 16:9 sequence, glitches appear on the right edge when the Adjustment layer has a combination of CUDA and Lumetri.
- Clip Name background color draws over selection outline and clip outline.
- Auto Color Match does not work with speed change.
- Color workspaces: Unsafe memory usage in PixelFormatConvert.
- DCM kernel uses out of scoped memory for kernel parameters.
- Lumetri Color adds distortion to right edge of stills (MPE - CUDA).
- In Lumetri, CIrGFTexture does not check for GPU allocation or operation errors.
- STL Sidecar Captions ignore sequence out point in OP47.
- Embedded Captions are one frame shorter than content in OP47.
- Nesting of large number of clips is not possible.
- Sequence playback crashes with Morph Cut.
- The application hangs on moving Morph Cuts.
- DisplaySurface is limited to 8 bits in Metal.
- When FCP XML is exported from Premiere Pro, position keyframes are not translated and are set to 0,0.
- In Metal 1.0, errors appear on playing a project on Mac OS.
- Flattening a multicam shifts effect keyframes if its components have speed changes.
- Shared projects: Merged clips break when dragging from one project to the other.
- Sync Settings : Removing Manage Creative Cloud Account'still is visible in File>Sync Settings menu on Windows.
- GoPro7 file displays upside down Proxy with GPU Renderers.
- An audio icon or wrong icon is displayed for subclips in icon view.
- Dynamic link: Character Animator cannot find the source and the application terminates when a saved project in Premiere Pro has multiple Character Animator sequences from different Character Animator projects.
- Out of sync icon +1/-1 unselectable.
- Project bin lock icon in a bad state with project from Dolemite.
- SRT/STL Import Background is only used, if defined in file. If defined as opaque and "Overwrite file settings", if should always be used.
- Occasional crashes in CC Library (Windows only)
- Compatibility issues AVI codecs: erroneous warning message on launching Premiere Pro; Crash on launch when loading ExporterAVI.prm
- Issues with importing Blackmagic Video Assist & Hyper Deck ProRes files
- Issue with dragging to adjust text and graphics on video image when Display Setting is set to something other than 100% (Windows only)
- Keying issue with ProRes444 and Alpha channel
- Issue with exporting certain Sony files as JPEG2000 MXF op1 file
- Incorrect fonts appearing in Motion Graphics Templates created in After Effects 15.0 and 15.1.
- Issue with Motion Graphic Templates with font controls not rendering correctly after the font is changed.
- Intel Coffee Lake CPU - crash when importing/opening a previously created project while NVIDIA driver is enabled.
- Crash can occur when going backwards in Learn panel.
- Crash when switching to Thumbnail view with PNG files.
- Multiple unexpected recovery clips are created when working with multiple open projects.
- Import reference file for some audio (for example: AIFF, MOV) results in low-level exception in ImporterMPEG.
- The process of importing multiple AVCHD files can take a long time on Mac OS.
- Crash when switching between Workspaces viewing Waveform Luma & RGB Alignment in Lumetri Scope.
- Crash can occur on laptop with discrete GPU running Windows 10.
- Crash when quitting if "Manage My Account' link is open in that session.
- Several redrawing errors, crash, and blank screen while changing workspaces using the top Workspace bar.
- Crash when importing XDCAM files from Nexio/Harris Velocity.
- Crash when using "Reveal Project in Project Panel" with a few specific projects.
- Reverse nested sequence causes program monitor to display black.
- Files generated by YI camera result in low-level exceptions or application stops responding.
- Duplicating sequences wipes out effect data.
- After adding a motion effect to clip on timeline, playback will freeze.
- Crash occurs when match framing or slip/slide of clips in multicam sequence.
- Placing growing MXF file from Abekas into sequence causes Premiere Pro to crash.
- Hang when rendering some timelines.
- MP4 material can cause video playback to freeze and the application to stop responding.
- Application hangs when importing 100 or more files, resulting in force quit.
- Importing fcp xml into large project results in a freeze.
- Hang while importing specific GoPro files.
- Improved performance on Metal Mercury Playback Engine
- Improved Reverse Playback performance of HEVC file
- Improved Metal renderer performance at Full Res playback
- Lumetri: Performance drop/dropped frames with interlaced media (GPU)
- 8K R3D playback performance issues at Full and half resolution (MAC)
- Some ARRI Alexa Mini files appear incorrectly vertically instead of horizontally.
- HEVC mov files with Codec ID hev1 import as audio only.
- Playback does not work when importing ALEXA_LF 3840 x 2160 files.
- R3D file plays back distorted in 1/4 resolution or lower playback setting.
- When importing Prores422HQ codec mov files on Mac, a slight color shift can occur.
- QuickTime files that are out of gamut are shown as being in gamut on Windows.
- Open GOP files have artifacts with HW decode.
- Some H.264 files with Frame Rate & Original Frame Rate values have switch to software decode.
- Imported H.264 10-bit files have shift in color values.
- Premiere can't import 4448x1856 ARRI RAW files and eventually hangs the app.
- Importing some QT files causes the app to hang or crash.
- Subsequent imports of XDCAM HD 422 MOV file import only audio.
- Some Audio/Video file imports as Video only.
- Filmic Pro files import as video only.
- 4K Raw files from Sony FS7 import as white screen.
- Workspace is blank when opening legacy project.
- Open legacy Project brings up workspace dialog each time.
- Workspaces don't save with the project.
- Display Timecode is inconsistent when multiple Timeline panels are visible.
- Opening a second project opens two project tabs in Project Panel.
- Switch to another workspace results in missing some or all of the Project tabs.
- Adding marker to Multi-cam clip causes waveform to disappear.
- Clip name in timeline not legible.
- File selection is not carried over when switching between Icon and List Views in Project panel.
- Marker workflow between Timeline, Source Monitor, and Program Monitor panels is broken.
- Video and Audio usage drop-down list doesn't work if any clip is selected in the Project Panel.
- Digital distortion in silent areas between clips if used as a track-based compressor.
- Drag clips from one project to another project’s sequence loses clip label color.
- Moving Clip Between Projects Via Source Monitor loses Label Color.
- Reveal in Project, with Bin set to Open in place, results in Bin tab not being selected.
- Merged Clips are deleted from a timeline, without a warning, if a smart bin filtering merged clip is deleted.
- Clip marker comments are lost when quitting.
- When AJA Capture Settings dialog is set to Control Panel, changes are unsaved.
- Background color of drop zone barely visible when dragging media from Finder onto project folder.
- Saving multiple open projects that originally had different saved renderers all get saved with current renderer.
- Motion Graphic Template does not always relink, indicating that After Effects must be installed.
- Can't change camera views of a multi-cam project item in a locked project.
- When AJA io4k is configured to transmit Rec 2020 over HDMI, picture outcome is corrupted.
- With Sonnet eGPU device attached to iMac Pro, new timeline creation leads to crash.
- Incorrect XMP data leads to missing frames in Source Monitor playback.
- Intermittently lose decoding of CC 608 or 708 in timeline when adding more than one blank caption with ctrl click add caption to timeline.
- Sometimes after making two blank captions, all captions are now white and default to upper left.
- Trying to author captions on V3 when another captions track is on V2 causes multiple problems and sometimes locks user out of V3 track.
- Windows Only - setting I/O point and exporting project with embedded captions strips captions from track.
- When import dfxp TTML open caption file and place it on the timeline, characters appear to overlap on the program monitor.
- Media Pending error displays when Audio Input set to non-working device.
- Mix down clips to stereo setting deletes track routing when dragging a Sequence to the Source Monitor with Multichannel Master tracks.
- Specific AAF files that are exported fail to import on Windows.
- Silent Audio Export from Audio Clip at 9000% Speed.
- Solo in clip mixer with a clip loaded into the source monitor does not properly reflect the solo state in the mini meters.
- Waveforms constantly refresh with large projects when BlackMagic transmit enabled.
- Switching cameras on multicam clip in the source monitor does not switch audio unless third-party transmit is enabled.
- Embed audio for AAF creation strips out the audio file metadata.
- There is intermittent Left/right channel bleed and waveforms only display problem areas at certain zoom levels.
- Some TS muxed 5.1ch files are imported as stereo.
- Incomplete audio when recording on two tracks.
- Audio distortion when using an ASIO sound card, Decklink device, and switching rapidly between Multicam View leads to hang.
- Flattening a multicam audio item clears any volume adjustment.
- Green/pink patches along with horizontal lines are observed while playback of HEVC/H.264 files with Intel Graphics 620.
- Error Compiling Movie "Software Render Error" for some third-party Plug-ins.
- Warp Stabilizer gives a bad result with interlaced footages.
- Certain settings for MPEG-2 export result in pixelation.
- Red frames when exporting specific projects.
- Export of HEVC 4K clip using HW encoding on i9 MacBookPro results in ExporterMPEG_VideoToolbox error.
- Analyzing in Background banner appears erroneously when playing a Morph Cut.
- Export Range is full instead of limited when exporting HDR content for H.264 and HEVC.
- Export failures - caused by Lumetri Render error.
Twitter™ and Facebook posts are not covered under the terms of Creative Commons.